{"product_id":"sew-eurodrive-cfm112m-rh1m-feedback-technical-guide","title":"SEW-EURODRIVE CFM112M \/ RH1M Feedback | Technical Guide | Service Visit for Installation, Repair, Alignment","description":"\u003cdiv class=\"sf-feedback-intro\"\u003e\n\u003cp\u003eSEW-EURODRIVE CFM112M \/ RH1M — RH1M resolver. Use this guide to identify the fitted feedback, separate connection faults from sensor faults and prepare a supported evaluation. SpareFaber can assess an appropriate UAE site visit, installation\/alignment work or send-in bench evaluation after reviewing the actual labels and fault history.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"#identify\"\u003eIdentify the fitted part\u003c\/a\u003e · \u003ca href=\"#diagnose\"\u003eFault checks\u003c\/a\u003e · \u003ca href=\"#documents\"\u003eDrawings and manuals\u003c\/a\u003e · \u003ca href=\"#encoder-enquiry\"\u003eSend an enquiry\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\u003carticle class=\"feedback-guide\"\u003e\u003csection id=\"identify\"\u003e\u003ch2\u003eIdentify the fitted part\u003c\/h2\u003e\n\u003cdiv class=\"table-scroll\"\u003e\u003ctable class=\"id-table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eGuide scope\u003c\/th\u003e\n\u003ctd\u003eSEW-EURODRIVE CFM112M \/ RH1M — motor feedback application\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFeedback identity\u003c\/th\u003e\n\u003ctd\u003eSEW RH1M resolver; verify fitted label and excitation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eModel \/ configuration identifier\u003c\/th\u003e\n\u003ctd\u003eCFM112M \/ RH1M\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMotor order scope\u003c\/th\u003e\n\u003ctd\u003eFrame\/feedback configuration, standard motor without brake; not a complete winding order or inspected fitted unit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInterface\u003c\/th\u003e\n\u003ctd\u003eRH1M resolver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eStarting connection\u003c\/th\u003e\n\u003ctd\u003eTI-5908 only for the matching 12-contact M23 resolver connection; verify winding pairs and connector view.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\u003c\/section\u003e\u003csection id=\"mitchell-tests\"\u003e\u003ch2\u003eSpecialist testing: connection before conclusion\u003c\/h2\u003e\n\u003cdiv class=\"table-scroll\"\u003e\u003ctable class=\"spec-table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTI-5000JX bench scope\u003c\/th\u003e\n\u003ctd\u003eConditional TI-5000JX named SEW CMP\/CFM resolver evaluation, with actual excitation, ratio, connector and supported setup confirmed.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eStarting lead \/ fixture\u003c\/th\u003e\n\u003ctd\u003eTI-5908 only for the matching 12-contact M23 resolver connection; verify winding pairs and connector view.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProfile \/ module\u003c\/th\u003e\n\u003ctd\u003eConfirm resolver excitation, ratio, winding pairs and fitted alignment. RH1M has no serial-encoder motor memory.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTI-3000JX motor-run scope\u003c\/th\u003e\n\u003ctd\u003eMotor-run scope remains conditional on the exact motor\/feedback profile, poles, phase order, alignment, power wiring, restraint and amplifier envelope. Frame size or bench support does not establish full-rating run capability.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\u003cp\u003eThe documented test reference is SEW Servo Motors — Named SEW CMP\/CFM resolver family; OEM drawing p.107; standard no-brake configuration. Verify installed tester software, the actual sensor option and the fixture before connection. A bench result describes the tested configuration; it does not by itself clear the complete drive, brake, machine cable or loaded axis.\u003c\/p\u003e\u003c\/section\u003e\u003csection id=\"availability\"\u003e\u003ch2\u003eProduction and replacement status\u003c\/h2\u003e\n\u003cp\u003eThe linked manufacturer document identifies this catalogue configuration. Current production, availability and any approved successor require confirmation against the complete fitted order. A downloadable manual does not prove present stock. Compare voltage, winding, mounting, shaft, brake, feedback, connector and stored motor-data requirements before accepting a replacement.\u003c\/p\u003e\u003c\/section\u003e\u003csection id=\"specifications\"\u003e\u003ch2\u003eSpecifications and interface\u003c\/h2\u003e\n\u003cdiv class=\"table-scroll\"\u003e\u003ctable class=\"spec-table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFeedback technology\u003c\/th\u003e\n\u003ctd\u003eRH1M resolver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFrame \/ feedback configuration\u003c\/th\u003e\n\u003ctd\u003eCFM112M \/ RH1M\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMotor square flange\u003c\/th\u003e\n\u003ctd\u003e190 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMotor shaft diameter\u003c\/th\u003e\n\u003ctd\u003e32 mm; see drawing for tolerances\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOverall axial length, including shaft\u003c\/th\u003e\n\u003ctd\u003e406 mm; standard no-brake configuration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBrake scope\u003c\/th\u003e\n\u003ctd\u003eWithout holding brake; braked versions require their own outline\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOEM outline reference\u003c\/th\u003e\n\u003ctd\u003ePrinted page 107 of the linked CFM catalogue 19424019\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOrder scope\u003c\/th\u003e\n\u003ctd\u003eFrame and feedback option; complete winding and connector order not established\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRH1M sensor class\u003c\/th\u003e\n\u003ctd\u003eTwo-pole resolver; one pole pair\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eExcitation reference\u003c\/th\u003e\n\u003ctd\u003eMitchell table: 7 V AC nominal; verify fitted frequency, transformation ratio and supported setup before applying excitation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMotor-memory scope\u003c\/th\u003e\n\u003ctd\u003eNo serial-encoder motor-memory read or copy operation for this resolver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eService values\u003c\/th\u003e\n\u003ctd\u003eExact encoder coupling dimensions, pin map and tightening torque require the fitted assembly drawing.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\u003cp\u003eRH1M is a resolver, not a serial absolute encoder. Excitation and both analogue winding responses must be assessed together through a full mechanical revolution. A lost winding pair, poor contact, incorrect excitation or an altered phase relationship can each produce incorrect position. The two-pole designation describes the resolver; it does not establish the motor pole count. A resolver does not provide retained multiturn machine position.\u003c\/p\u003e\u003c\/section\u003e\u003csection id=\"mounting\"\u003e\u003ch2\u003eMechanical fit and retention\u003c\/h2\u003e\n\u003cp\u003eRecord the incoming shaft datum, pilot, bolt circle, rear clearance, cable exit and encoder retention before removal. Inspect play, debris, moisture and damaged contacts. Follow the exact assembly drawing for fits and fasteners; motor flange dimensions do not establish encoder coupling dimensions or tightening torque. Use the CFM112M outline on printed page 107. Its 190 mm flange and 32 mm shaft are independent dimensions. Verify pilot, bolt-circle, shaft projection and cable bend clearance from the same drawing. This CFM dimension is for the standard RH1M motor without brake. An RH1L brake-motor arrangement is not the same axial package. \u003c\/p\u003e\n\u003cp\u003eCFM112M \/ RH1M identifies a 190 mm square flange, 32 mm shaft and 406 mm overall axial length including the shaft in the standard no-brake drawing. This is a frame\/feedback configuration; the winding, connector and any other fitted suffix still require the complete motor nameplate.\u003c\/p\u003e\u003c\/section\u003e\u003csection id=\"wiring\"\u003e\u003ch2\u003eWiring and connector boundaries\u003c\/h2\u003e\n\u003cp\u003eKeep motor power, protective earth, feedback and temperature circuits separate. Match contact numbering, keying, gender and mating-face versus wire-side view. Connector appearance alone is insufficient to establish a pin map. TI-5908 only for the matching 12-contact M23 resolver connection; verify winding pairs and connector view. Establish reference, sine and cosine winding pairs from the actual connection drawing. Check isolation and continuity with the assembly disconnected and the permitted measurement method. Supply frequency and transformation ratio must match the fitted resolver and selected tester setup. \u003c\/p\u003e\n\u003cp\u003eStarting connection for this guide: TI-5908 only for the matching 12-contact M23 resolver connection; verify winding pairs and connector view.. Use the source below for its named scope. Any unverified pin assignment remains open until the correct drawing is available.\u003c\/p\u003e\u003c\/section\u003e\u003csection id=\"motor-cables\"\u003e\u003ch2\u003eInternal loom and machine cables\u003c\/h2\u003e\n\u003cp\u003eRecord the internal encoder-to-motor loom separately from the external machine cable and bench fixture. The internal loom part number is not established by the frame or interface alone. Obtain both connector faces, the assembly diagram and the correct contact view. Match cable length, shielding, temperature rating and fixed or flexing duty to the installation. A Mitchell test lead identifies a test connection; it is not an OEM replacement machine cable.\u003c\/p\u003e\u003c\/section\u003e\u003csection id=\"diagnose\"\u003e\u003ch2\u003ePractical fault checks\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eIsolation and measurement conditions\u003c\/summary\u003e\u003cp\u003eSecure moving loads, isolate and lock out the relevant energy sources, follow the specified discharge time and have a qualified technician verify isolation before physical inspection or resistance checks. Disconnect both cable ends before continuity\/short testing. Powered supply measurements, rotation, retention work and alignment require the approved fixture and procedure.\u003c\/p\u003e\u003c\/details\u003e\u003cdiv class=\"table-scroll\"\u003e\u003ctable class=\"fault-table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eIdentify the exact configuration\u003c\/th\u003e\n\u003ctd\u003eCFM112M \/ RH1M identifies a 190 mm square flange, 32 mm shaft and 406 mm overall axial length including the shaft in the standard no-brake drawing. This is a frame\/feedback configuration; the winding, connector and any other fitted suffix still require the complete motor nameplate.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eIntermittent fault during cable movement\u003c\/th\u003e\n\u003ctd\u003eAfter isolation and disconnection at both ends, inspect flex points, pin engagement, contamination and earlier repairs. Compare continuity and unintended shorts against the correct diagram, accounting for intentional shield bonds.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eUnstable position or missing feedback\u003c\/th\u003e\n\u003ctd\u003eVerify the actual sensor profile, matched excitation or DC supply, contact view and fixture. Inspect both analogue paths where applicable. A connector that mates mechanically can still have an incompatible pin assignment.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePosition reads but the drive rejects it\u003c\/th\u003e\n\u003ctd\u003eCheck the resolver winding relationship, phase convention and exact motor profile. A serial-memory reset is not an RH1M diagnostic.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eReplacement dimensions look close\u003c\/th\u003e\n\u003ctd\u003eCompare this exact flange, shaft, feedback housing, brake and connector arrangement with the linked drawing. Do not use magnet-stack length, family digits or a similar power rating as the complete mounting envelope.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\u003c\/section\u003e\u003csection id=\"alignment\"\u003e\u003ch2\u003eAlignment, reference and memory\u003c\/h2\u003e\n\u003cp\u003ePreserve the original mechanical reference, phase convention, rotation direction and readable drive settings before disassembly. Communication or a smooth position reading alone does not prove correct electrical alignment or the machine reference. Use the fitted SEW resolver procedure and exact motor profile. Mitchell describes a common SEW convention of +U\/−V at 60 electrical degrees and +U\/−W at 120 electrical degrees for most applicable motors; this is not a universal value. Confirm whether the actual motor follows that convention before alignment. RH1M has no serial memory from which to recover a motor-specific offset.\u003c\/p\u003e\u003c\/section\u003e\u003csection id=\"applications\"\u003e\u003ch2\u003eMotor and drive applications\u003c\/h2\u003e\n\u003cp\u003eCFM112M \/ RH1M; 190 mm square flange; Ø32 mm shaft; no brake. CFM112M \/ RH1M identifies a 190 mm square flange, 32 mm shaft and 406 mm overall axial length including the shaft in the standard no-brake drawing. This is a frame\/feedback configuration; the winding, connector and any other fitted suffix still require the complete motor nameplate.\u003c\/p\u003e\n\u003cp\u003eA matching maker, connector shell or protocol name is not a complete compatibility chain. Keep motor order → feedback option → internal loom → bulkhead → machine cable → drive configuration recorded separately. No unverified alternate part is offered by this guide.\u003c\/p\u003e\u003c\/section\u003e\u003csection id=\"documents\"\u003e\u003ch2\u003eDrawings, manuals and evidence\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/support.mitchell-electronics.com\/hc\/en-us\/articles\/27282690417947-SEW-Servo-Motors\" target=\"_blank\" rel=\"noopener\"\u003eSEW Servo Motors\u003c\/a\u003e — Named SEW CMP\/CFM resolver family; OEM drawing p.107; standard no-brake configuration\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/support.mitchell-electronics.com\/hc\/en-us\/articles\/18972764908827-SEW-Standard-Alignment\" target=\"_blank\" rel=\"noopener\"\u003eSEW Standard Alignment\u003c\/a\u003e — Named family and feedback option, rechecked 11 November 2026\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/download.sew-eurodrive.com\/download\/pdf\/19424019.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSEW-EURODRIVE CFM71–112 Synchronous Servomotors, 19424019\/EN, March 2017\u003c\/a\u003e — RH1M standard resolver; pp.99,103,107 plug-connected motor dimensions without brake\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eObtain complete fitted motor and feedback labels, exact service ID, internal loom and connector mating-face drawing. Confirm the linked document revision, fitted retention and enabled test setup before extending replacement, wiring or motor-run claims. SEW title is a frame\/feedback configuration; complete winding and connector suffixes remain to record.\u003c\/p\u003e\u003c\/section\u003e\u003csection id=\"questions\"\u003e\u003ch2\u003eCommon questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat should accompany a CFM112M \/ RH1M enquiry?\u003c\/summary\u003e\u003cp\u003eSend clear photographs of the motor and feedback labels, every suffix\/ID, both connector faces, drive model, exact alarm and the circumstances of the fault. Include recent wiring, bearing, encoder or parameter work.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eCan the listed Mitchell lead be used as a replacement machine cable?\u003c\/summary\u003e\u003cp\u003eThe lead is documented for the stated test connection. OEM internal looms and machine extensions require their own part numbers, pin maps and mechanical ratings.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eDoes a successful feedback bench test prove that the motor can be run? \u003c\/summary\u003e\u003cp\u003eMotor-run scope remains conditional on the exact motor\/feedback profile, poles, phase order, alignment, power wiring, restraint and amplifier envelope. Frame size or bench support does not establish full-rating run capability. A complete run assessment also checks motor power, brake, protection and mechanical conditions.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhen does a site visit or send-in evaluation make sense?\u003c\/summary\u003e\u003cp\u003eA site visit can help when the fault depends on the drive, installation or moving cable. Send-in evaluation can isolate a removable feedback assembly or supported motor configuration. Agree scope, packing, availability and turnaround with SpareFaber after identification.\u003c\/p\u003e\u003c\/details\u003e\u003c\/section\u003e\u003csection id=\"service\"\u003e\u003ch2\u003eRequest a scoped service evaluation\u003c\/h2\u003e\n\u003cp\u003eUse the existing \u003ca href=\"#encoder-enquiry\"\u003eencoder enquiry form\u003c\/a\u003e with the labels, alarm and connection photographs. Specify whether you need UAE field diagnosis, installation\/alignment assessment or send-in testing. Turnaround and repair scope are confirmed after review of the fitted configuration.\u003c\/p\u003e\u003c\/section\u003e\u003csection id=\"related\"\u003e\u003ch2\u003eRelated technical guides\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/sparefaber.com\/products\/sew-eurodrive-cfm-resolver-feedback-technical-guide\" target=\"_blank\" rel=\"noopener\"\u003eTCG446 — SEW-EURODRIVE CFM resolver Feedback\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003c\/section\u003e\u003c\/article\u003e","brand":"Ajman Factories Equipment Trading","offers":[{"title":"Default Title","offer_id":51157801631909,"sku":"TCG784","price":136.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0775\/3557\/6229\/files\/sew-eurodrive-cfm112m-rh1m-service-guide.jpg?v=1794399980","url":"https:\/\/www.sparefaber.com\/de\/products\/sew-eurodrive-cfm112m-rh1m-feedback-technical-guide","provider":"SpareFaber","version":"1.0","type":"link"}