{"product_id":"accucoder-725i-s-s-2500-r-hv-1-f-n-sx-n-n","title":"AccuCoder 725I-S-S-2500-R-HV-1-F-N-SX-N-N | Quadrature A \u0026 B with Index | Line Driver","description":"\u003cp\u003eAccuCoder Encoder by Encoder Products \u003cbr\u003e725I-S-S-2500-R-HV-1-F-N-SX-N-N\u003cbr\u003e+\/vcc input 5-28V\u003cbr\u003e HEAVYDUTY ABN A-B-N- 2500PPR\u003c\/p\u003e\n\u003cp\u003ealternative replacement for : \u003cbr\u003eEncoder Products Company 725I-S-S-2500-R-HV-1-F-1-SX-N-N Encoder, 2.5in housing, 1\/4in shaft, square flange, 2500 CPR, A, A, B, B, Z\u003cbr\u003eMFR Part #: 725I-S-S-2500-R-HV-1-F-1-SX-N-N\u003cbr\u003eRS Stock Number: 72459830\u003c\/p\u003e\n\u003cblockquote\u003e\n\u003cp\u003eHousing style:  Heavy duty industrial with internal flex mount\u003cbr\u003eShaft size: 3\/8\", 0.375\" (standard)\u003cbr\u003eOperating temperature: 0to70Degree C\u003cbr\u003eCycles per Revolution: 2500 PPR\u003cbr\u003eOutput Type: LIne Driver\u003cbr\u003eMAXIMUM FREQUENCY:  Standard 100 kHz\u003cbr\u003eSealing: No seal\u003cbr\u003eSX: Connector location Side\/ 6Pin MS\u003cbr\u003eNo mating connector supplied\u003cbr\u003eCertificaiton: None\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eMODEL 725 SPECIFICATIONS\u003cbr\u003eElectrical\u003cbr\u003eInput Voltage 4.75 to 28 VDC max for temperatures up to 70° C\u003cbr\u003e4.75 to 24 VDC for temperatures between 70° C and 100° C\u003cbr\u003eInput Current 100 mA max with no output load\u003cbr\u003eInput Ripple 100 mV peak-to-peak at 0 to 100 kHz\u003cbr\u003eOutput Format Incremental – Two square waves in quadrature with\u003cbr\u003echannel A leading B for clockwise shaft rotation, as viewed\u003cbr\u003efrom the encoder mounting face. See Waveform Diagrams.\u003cbr\u003eOutput Types Open Collector – 100 mA max per channel\u003cbr\u003ePull-Up – Open Collector with 2.2K ohm internal resistor,\u003cbr\u003e100 mA max per channel\u003cbr\u003ePush-Pull – 20 mA max per channel\u003cbr\u003eLine Driver – 20 mA max per channel\u003cbr\u003e(Meets RS 422 at 5 VDC supply)\u003cbr\u003eIndex Occurs once per revolution. The index for units \u0026gt;3000 CPR\u003cbr\u003eis 90° gated to Outputs A and B. See Waveform Diagrams.\u003cbr\u003eMax Frequency Up to 1 MHz\u003cbr\u003eElectrical Protection Reverse voltage and output short circuit protected.\u003cbr\u003eNOTE: Sustained reverse voltage may result in permanent\u003cbr\u003edamage.\u003cbr\u003eNoise Immunity Tested to BS EN61000-4-2; IEC801-3;\u003cbr\u003eBS EN61000-4-4; DDENV 50141;\u003cbr\u003eDDENV 50204; BS EN55022\u003cbr\u003e(with European compliance option);\u003cbr\u003eBS EN61000-6-2; BS EN50081-2\u003cbr\u003eSymmetry 1 to 6000 CPR: 180° (±18°) electrical at\u003cbr\u003e100 kHz output\u003cbr\u003e6001 to 20,480 CPR: 180° (±36°) electrical\u003cbr\u003eQuad Phasing 1 to 6000 CPR: 90° (±22.5°) electrical at\u003cbr\u003e100 kHz output\u003cbr\u003e6001 to 20,480 CPR: 90° (±36°) electrical\u003cbr\u003eMin Edge Separation 1 to 6000 CPR: 67.5° electrical at 100 kHz output\u003cbr\u003e6001 to 20,480 CPR: 54° electrical \u0026gt;20,480 CPR: 50°\u003cbr\u003eelectrical\u003cbr\u003eRise Time Less than 1 microsecond\u003cbr\u003eAccuracy Instrument and Quadrature Error: For 200 to 1999 CPR,\u003cbr\u003e0.017° mechanical (1.0 arc minutes) from one cycle to\u003cbr\u003eany other cycle. For 2000 to 3000 CPR, 0.01° mechanical\u003cbr\u003e(0.6 arc minutes) from one cycle to any other cycle.\u003cbr\u003eInterpolation error (units \u0026gt; 3000 CPR only) within 0.005°\u003cbr\u003emechanical. (Total Optical Encoder Error = Instrument +\u003cbr\u003eQuadrature + Interpolation)\u003cbr\u003eMechanical\u003cbr\u003eMax Shaft Speed 8000 RPM. Higher shaft speeds may be achievable,\u003cbr\u003econtact Customer Service.\u003cbr\u003eShaft Material 303 Stainless Steel\u003cbr\u003eShaft Rotation Bi-directional\u003cbr\u003eRadial Shaft Load. 80 lb max. Rated load of 20 to 40 lb for bearing life of 1.5 x\u003cbr\u003e10⁹ revolutions\u003cbr\u003eAxial Shaft Load 80 lb max. Rated load of 20 to 40 lb for bearing life of 1.5 x\u003cbr\u003e10⁹ revolutions\u003cbr\u003eStarting Torque 1.0 oz-in typical with IP64 seal or no seal\u003cbr\u003e3.0 oz-in typical with IP66 shaft seal\u003cbr\u003e7.0 oz-in typical with IP67 shaft seal\u003cbr\u003eMoment of Inertia 5.2 x 10-⁴ oz-in-sec2\u003cbr\u003eHousing Black non-corrosive finish\u003cbr\u003eBearings Precision ABEC ball bearings\u003cbr\u003eWeight 20 oz typical\u003cbr\u003eEnvironmental\u003cbr\u003eStorage Temp -25° to 85° C\u003cbr\u003eHumidity 95% RH non-condensing\u003cbr\u003eVibration 20 g @ 58 to 500 Hz\u003cbr\u003eShock 75 g @ 11 ms duration\u003cbr\u003eSealing IP50 standard; IP64, IP66 or IP67 optiona\u003c\/p\u003e","brand":"Fanuc","offers":[{"title":"Default Title","offer_id":48110943404197,"sku":"SP289","price":1080.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0775\/3557\/6229\/files\/AccuCoder725I-S-S-2500-R-HV-1-F-N-SX-N-N_2.jpg?v=1786268249","url":"https:\/\/www.sparefaber.com\/products\/accucoder-725i-s-s-2500-r-hv-1-f-n-sx-n-n","provider":"SpareFaber","version":"1.0","type":"link"}