What specialist testing can show
TI-5000JX bench. Check reference and both winding returns on the documented connection.
TI-3000JX motor run. Verify the complete motor, fitted power connector and applicable resolver run profile.
Starting lead. TI-5921 for the 10-contact MS resolver arrangement.
Allen-Bradley 1326AB Servo Motor Resolver Feedback technical reference
Find your part number
Compare the fitted feedback label, complete motor order and connector. A motor order and an encoder MPN identify different items.
| ID or order | How to identify it |
|---|---|
| 1326AB with 10-contact MS resolver | Scope of Mitchell TI-5921. Read the complete order and check the connector view. |
| 1326AB with an encoder option | Check the option code and use the correct feedback drawing. |
| Resolver cable variants | Rockwell documents different feedback and cable arrangements. Identify the exact resolver ratio and connection. |
Production and end-of-life status
Confirm orderability and any replacement with the manufacturer against the full fitted ID. The linked documents identify the documented setup.
Specifications
| Parameter | Verified scope |
|---|---|
| Feedback | Passive resolver angle feedback, with excitation and two return circuits. |
| Starting lead | TI-5921 for the documented 10-contact MS resolver connector. |
| Drive reference | Rockwell’s 1394 manual documents this motor family and its commissioning scope. Use the matching motor and drive data for fitted ratings. |
Interface and measuring method
With the specified AC reference, the two resolver returns vary with shaft angle. A stable speed or position reading depends on winding health, wiring, direction and the drive’s resolver setting.
Mounting and fit
Use the 1326AB rear assembly drawing for the exact motor size. Mark the received housing and electrical reference. Inspect the outside connector and cable before disturbing the resolver.
Wiring and connector scope
Use the 1394 and exact 1326AB drawings to identify the excitation pair and sine/cosine returns. Match the MS mating view and keep resolver cable variants separate.
Internal motor and machine cables
Trace the motor-side harness and drive extension using the fitted order and original cable designation. TI-5921 is a test cable. Record cable shielding and both terminations for a replacement.
Fault checks
Use the site’s isolation procedure before opening a connector or checking resistance. Secure the load against motion, lock out relevant energy sources, wait the specified discharge time and have a qualified technician verify isolation. Follow the OEM procedure for any retention battery.
What can I check on the machine?
Disconnect the harness at both ends. Check end-to-end continuity against the exact drawing, then check for unintended shorts between conductors and to the shell or shield. Compare against the documented shield bonds. Inspect pins, keying, debris, moisture and latch engagement. Check clamps or fasteners only where accessible under the approved procedure.
A resolver is passive. Check isolated winding continuity against the matching drawing. Use the specified AC excitation on the approved test fixture for a signal check.
| Symptom | What to verify |
|---|---|
| No angle with a correct drive setup | Check the excitation path and isolated winding continuity on the fitted resolver. |
| Angle weak or discontinuous | Compare the sine and cosine returns and the isolated cable connections. |
| Stable angle with commutation error | Verify resolver phase, direction and motor definition. |
Angle of alignment and commissioning
Compare the original resolver direction and motor electrical angle to the correct Rockwell procedure. Confirm the drive’s motor definition and approved fixture before any powered rotation.
Motor and drive applications
1326AB with documented resolver feedback and 10-contact MS
Identify the resolver branch from the order and plug before choosing wiring or comparing it with a HIPERFACE 1326AB.
Related SpareFaber guides
Drawings, pin maps and manuals
- Mitchell Test Cable Index by Manufacturer. Allen-Bradley and resolver sections, TI-5921 1326AB resolver
- Rockwell 1394 user manual, 1326AB resolver motor order. Supplementary reference for the stated model or setup.
- Rockwell 1326AB product data. Resolver and encoder connection variants. Match the actual drawing and cable family.
Questions
Can I use a similar label as a replacement?
Compare the interface, mechanical fit, connector, data or commutation requirements and OEM option before choosing a substitute. The ID table gives the useful distinctions for this guide.
What information helps with a diagnosis?
Send the encoder and motor labels, drive model, alarm history and both connector views. Say whether the problem began after cable work, encoder replacement or a drive change. We can confirm visit scope or send-in evaluation and timing from those details.
Site visit or send-in evaluation
Send the encoder and motor labels, drive model, alarm history and both connector views. Say whether the problem began after cable work, encoder replacement or a drive change. We can confirm visit scope or send-in evaluation and timing from those details.