Site visit or send-in evaluation
Share the full feedback ID, machine or motor order code, drive or controller model and fault history. Send photos of the label, mating connectors and mounting. Tell us if the fault followed a repair, cable change or controller replacement. Request a UAE site visit or bench evaluation.
What specialist testing can show
Use a compatible SSI master and approved analogue input to check position and both sine/cosine tracks. Balluff documents the BML Configuration Tool BAE PD-ML-010-04. Verify the exact adapter and any Mitchell profile for this head before hookup.
Balluff BML0APY BML-S1G0-S71D-M5EA-D0-SA42-S284 SSI Linear Encoder technical reference
Find your part number
Use the full label and suffix. The main reference is BML-S1G0-S71D-M5EA-D0-SA42-S284. The related rows identify distinct configurations or label codes. Match the actual assembly before substituting.
| Exact ID or order code | Mechanical configuration | Electrical or service distinction |
|---|---|---|
| BML-S1G0-S71D-M5EA-D0-SA42-S284 · BML0APY | Lengthwise magnetic head, 16 × 18.5 × 80.3 mm, male 12-pin M12 S284. | SSI absolute position and analogue sine/cosine tracks, 1 µm stated resolution. |
| BML-S1G0-S71D-M5EG-D0-SA42-S284 · BML0AMW | Similar housing and connector, distinct M5EG order. Compare its own manual and tape. | Also listed with SSI and sine/cosine. Check variant configuration and permitted applications. |
Production and end-of-life status
Balluff provides exact records for BML0APY and BML0AMW. Confirm production and availability for the original order code with the manufacturer.
Specifications
| Parameter | Value and scope |
|---|---|
| Position and range | 1 µm resolution and 2 m stated measuring range for BML0APY. Verify the ordered tape and application. |
| Gap | 0.01–0.8 mm read distance on the exact product record. Use the manual's alignment and tolerance definitions. |
| Supply | 4.75–5.25 V DC or 10–28 V DC as specified on the exact record. Verify the installed supply range. |
| Output | SSI absolute data and nominal 1 Vpp ±0.35 V analogue sin/cos. Use the M5EA column. |
| Housing | 16 × 18.5 × 80.3 mm, M12×1 male 12-pin S284. Ambient −20 to +70 °C. |
The values in this table apply to the reference build unless a row identifies another scope. Main technical PDF.
Mounting and fit
Install the specified magnetic tape parallel to the direction of movement, with the sensor head oriented lengthwise as shown in the manual. Check read distance and angular deviations across the complete travel. Include adhesive and cover thickness when interpreting the gap figure. Dirt, ferrous particles and local tape lifting can affect readings at repeatable points.
Interface and measuring method
The controller clocks absolute position from the SSI data pair. The additional analogue sine and cosine outputs provide an incremental motion path for a controller that uses them. Compare SSI response, analogue amplitudes and motion versus datum independently. A controller can see an absolute frame even when its analogue channels are wired incorrectly.
Verified wiring
Use the S284 plug view on PDF page 57 and table 4-4 on page 58. The male pin-side view and the M5EA analogue column matter. The table here combines the SSI and analogue rows applicable to this order.
| Function | Contact or pair |
|---|---|
| Supply / GND | 8 / 7 |
| SSI clock + / − | 3 / 4 |
| SSI data + / − | 6 / 5 |
| Analogue cosine + / − | 1 / 2 |
| Analogue sine + / − | 10 / 9 |
| Preset input | 11, use only as specified by the OEM |
| Unused / shield | 12 remains free. Screen to connector housing per the manual. |
Verify the receiver's clock and data polarity and the signal naming convention. A different twelve-pin M12 connector may have another map.
Cables inside the motor and at the machine
Balluff's manual section 10.9 lists 12-pin M12 cordsets including BCC09MW (2 m) and BCC0JCN (5 m). Match the current cordset data, all used contacts, bend duty and supply drop before ordering. Keep any preset circuit protected against unintended operation.
Fault checks
External checks. Record the exact label, alarm, drive status and when the fault occurs. Look for visible plug damage, contamination, cable strain and looseness without opening a live assembly.
Isolation before internal work. Follow your site’s lockout procedure. Secure the load against movement, isolate all motor, drive and separate feedback supplies, allow the specified discharge time and verify absence of voltage. A qualified technician should perform internal and electrical checks. Unplug or reconnect only with the applicable circuits safely de-energized.
Harness continuity. Check resistance only on a harness you can disconnect from both the device and the receiver. Compare with shorted meter leads, flex gently at strain reliefs, and test for unintended shorts between conductors and to the shield. Use the schematic to recognize intended bonds. Keep resistance and insulation testers away from connected electronics.
| Observation | What to verify |
|---|---|
| No SSI response | Verify the intended supply at pins 8/7 and test clock and data pairs separately. |
| SSI valid, analogue position noisy | Check both sin/cos pairs at the receiver and compare the head gap and tape condition. |
| Position jumps near one point | Inspect the tape and mounting at that point. Check the controller's interpretation of error state and data format. |
| Repeatable offset after work | Compare machine datum, orientation and preset history before writing any setting. |
Powered checks. A qualified technician can fit an approved breakout while de-energized, secure motion, and compare documented supply and return at both ends under the specified load. Use the approved receiver or instrument to observe data or signal pairs. Return to an isolated state before changing connections.
Motor and drive applications
BML0APY is a magnetic absolute linear distance or rotary-angle measuring head with matching coded media. This guide covers the cited linear fit. Use the machine's specific tape or ring documentation and verify the exact hardware when comparing BML0AMW.
Angle of alignment and commissioning
Establish head-to-tape geometry through full travel, then restore the machine datum under the controller's commissioning procedure. Record device settings and the existing datum before using a preset or the Balluff configuration tool. Verify the reference in the approved test state.
Drawings, pin maps and manuals
- Main technical PDF. Start with the exact type or variant marked in the guide.
- Manufacturer or exact product reference. Use the order code and select the applicable downloads.
- Balluff S284 connector face and assignment. English section 4.4, table 4-4.
- Balluff mating cable options. Section 10.9 lists cable lengths and conductor resistance.
- Exact Balluff BML0AMW record. Separate M5EG variant.