Site visit or send-in evaluation
Share the full feedback ID, machine or motor order code, drive or controller model and fault history. Send photos of the label, mating connectors and mounting. Tell us if the fault followed a repair, cable change or controller replacement. Request a UAE site visit or bench evaluation.
What specialist testing can show
Start with the DRO display, alarm and known movement checks. Use the manufacturer's test procedure for the scale-to-counter link. Check continuity only in a separable, disconnected extension cable whose contact map is known.
Mitutoyo ABS AT715 539-811 600 mm Electromagnetic DRO Linear Scale technical reference
Find your part number
Use the full label and suffix. The main reference is 539-811. The related rows identify distinct configurations or label codes. Match the actual assembly before substituting.
| Exact ID or order code | Mechanical configuration | Electrical or service distinction |
|---|---|---|
| 539-811 · ABS AT715-600 | 600 mm effective range (24 in catalogue designation). Overall dimensions differ from travel. | Electromagnetic absolute scale. Verify counter and cable fit. |
| 539-811R | Separately listed 600 mm variant on the current Mitutoyo family page. | Confirm the revision and counter compatibility with Mitutoyo before swapping. |
| 539-809 | 500 mm effective range in the AT715 catalogue. | Different machine travel and mounting envelope. |
| 539-813 | 700 mm effective range in the AT715 catalogue. | Use the appropriate range, body drawing and bracket. |
Production and end-of-life status
The listed technical records identify this model. Confirm current production and orderability for the exact suffix with the manufacturer when sourcing a replacement.
Specifications
| Parameter | Value and scope |
|---|---|
| Measurement | Electromagnetic induction, absolute displacement for a compatible Mitutoyo DRO. |
| Travel | 600 mm effective range for 539-811. Check case length, fastening centres and clearance on the dimension drawing. |
| Accuracy | ±7 µm at 20 °C in the 600–1800 mm range of the catalogue. |
| Series ratings in this catalogue | IP67 and maximum response speed 50 m/min. Read the separate specs for a suffixed variant. |
| Counter resolution | 0.0005 to 0.01 mm settings with the documented KA/KLD200 counter, subject to configuration. |
The values in this table apply to the reference build unless a row identifies another scope. Main technical PDF.
Mounting and fit
Compare the required machine-axis travel with the scale's effective range. Keep the head clear of the end limits and support the cable through full travel. Follow the drawing for body and reader-head alignment, bracket position and access.
Interface and measuring method
The electromagnetic scale reports absolute axis displacement to a compatible digital readout. Verify the counter model, selected axis and units. A DRO zero or compensation setting can make a working scale display an unexpected result.
Verified wiring
Use the supplied scale signal cable with the counter specified for the scale revision. The public catalogue identifies the supported readouts and extension leads. Obtain the exact service connector drawing before probing contacts, splicing a lead or applying power.
Cables inside the motor and at the machine
The AT715 catalogue lists 09AAB674A, 09AAB674B and 09AAB674C extension cables in 2, 5 and 7 m. Check compatibility with the scale revision and counter, and support the connector and cable through the axis travel.
Fault checks
External checks. Record the exact label, alarm, drive status and when the fault occurs. Look for visible plug damage, contamination, cable strain and looseness without opening a live assembly.
Isolation before internal work. Follow your site’s lockout procedure. Secure the load against movement, isolate all motor, drive and separate feedback supplies, allow the specified discharge time and verify absence of voltage. A qualified technician should perform internal and electrical checks. Unplug or reconnect only with the applicable circuits safely de-energized.
Harness continuity. Check resistance only on a harness you can disconnect from both the device and the receiver. Compare with shorted meter leads, flex gently at strain reliefs, and test for unintended shorts between conductors and to the shield. Use the schematic to recognize intended bonds. Keep resistance and insulation testers away from connected electronics.
| Observation | What to verify |
|---|---|
| One axis is blank or unstable | Record the counter alarm, inspect its input plug and scale cable, then follow Mitutoyo's compatible-input substitution procedure if available. |
| Displayed travel is wrong but repeatable | Check counter units, axis direction and compensation against a known displacement. |
| Readout drops in one travel segment | Inspect head clearance, travel limit, cable flex and localized mechanical damage. |
Powered checks. A qualified technician can fit an approved breakout while de-energized, secure motion, and compare documented supply and return at both ends under the specified load. Use the approved receiver or instrument to observe data or signal pairs. Return to an isolated state before changing connections.
Motor and drive applications
The retrofit bulletin pairs AT715 scales with the KA-200 on documented mill kits. Record the actual readout model and scale suffix before ordering a service part. Verify compatibility with the fitted input and option.
Angle of alignment and commissioning
Mount the head and scale parallel to the axis using the installation drawing. Verify unobstructed travel and repeatability. Restore the DRO reference and parameters through the machine setup procedure.
Drawings, pin maps and manuals
- Main technical PDF. Start with the exact type or variant marked in the guide.
- Manufacturer or exact product reference. Use the order code and select the applicable downloads.
- Mitutoyo linear scale and DRO catalogue. Find the AT715 dimension drawing, 539-811 range row and accessory codes.
- Mitutoyo DRO retrofit bulletin 2309. See the documented 24 in 539-811 scale and KA-200 kits.
- Current AT715 family record. Includes separately suffixed part 539-811R and its revision-specific ratings.