What specialist testing can show
TI-5000JX bench. Use the TI-5000JX resolver method with the verified Fastact connector and appropriate excitation.
TI-3000JX motor run. Confirm the exact motor order, fixture and phase reference before a motor run.
Starting lead. Use the verified Fastact T/F resolver breakout. Match the standard or IP67 connection.
MOOG Fastact FAS T/F Resolver Servo Motor Feedback technical reference
Find your part number
Compare the fitted feedback label, complete motor order and connector. A motor order and an encoder MPN identify different items.
| ID or order | How to identify it |
|---|---|
| FAS T | Fastact servo family in Mitchell’s T/F resolver section. Verify complete motor designation and connection option. |
| FAS F | Fan-cooled version in the same family. Separate resolver, brake and fan circuits. |
| IP67 / T00 | Separate connection conditions in the Mitchell and MOOG drawings. Identify the fitted branch before choosing a lead. |
Production and end-of-life status
Confirm orderability and any replacement with the manufacturer against the full fitted ID. The linked documents identify the documented setup.
Specifications
| Parameter | Verified scope |
|---|---|
| Feedback principle | Passive resolver on the illustrated Fastact T/F setup. |
| Standard resolver connector | PT00E 14-19 PC-10 and the specified mate on the documented non-IP67, non-T00 branch. |
| Resolver speed and excitation | Use the exact MOOG order and fitted resolver specification. The catalogue distinguishes resolver options. |
Interface and measuring method
The drive applies AC excitation and derives angle from sine and cosine returns. A return with the wrong polarity can give a plausible waveform and an incorrect commutation angle.
Mounting and fit
Use the correct Fastact outline for the motor frame and connector clearance. Record the rotor and stator locating positions before opening the rear assembly.
Wiring and connector scope
Use the Fastact T/F resolver drawing for the actual plug. Identify each winding pair and separate the brake, fan and thermal paths. Verify the installed connector orientation.
Internal motor and machine cables
Choose the original machine cable by full motor and drive order. Match the IP67 or standard connector and any pigtail revision before replacing an internal harness.
Fault checks
Use the site’s isolation procedure before opening a connector or checking resistance. Secure the load against motion, lock out relevant energy sources, wait the specified discharge time and have a qualified technician verify isolation. Follow the OEM procedure for any retention battery.
What can I check on the machine?
Disconnect the harness at both ends. Check end-to-end continuity against the exact drawing, then check for unintended shorts between conductors and to the shell or shield. Compare against the documented shield bonds. Inspect pins, keying, debris, moisture and latch engagement. Check clamps or fasteners only where accessible under the approved procedure.
A resolver is passive. Check isolated winding continuity against the matching drawing. Use the specified AC excitation on the approved test fixture for a signal check.
| Symptom | What to verify |
|---|---|
| Both returns are missing | Verify the approved excitation and the isolated harness before diagnosing the resolver. |
| Only one pair is intermittent | Trace that winding and connector pair independently. |
| Angle is smooth and torque is irregular | Check winding polarity, resolver speed and original alignment. |
Angle of alignment and commissioning
Preserve the original resolver direction, motor position and electrical reference. Verify the selected resolver speed and polarity under the approved alignment procedure.
Motor and drive applications
MOOG Fastact T and fan-cooled F motor branches
Confirm motor order, resolver speed and excitation, connector option and exact tester lead.
Drawings, pin maps and manuals
- MOOG Motors. Fastact T/F, resolver connector drawings
- MOOG Fastact T/F technical catalogue. Motor outlines, connector drawings and documented resolver variants.
Questions
Can I use a similar label as a replacement?
Compare the interface, mechanical fit, connector, data or commutation requirements and OEM option before choosing a substitute. The ID table gives the useful distinctions for this guide.
What information helps with a diagnosis?
Send the encoder and motor labels, drive model, alarm history and both connector views. Say whether the problem began after cable work, encoder replacement or a drive change. We can confirm visit scope or send-in evaluation and timing from those details.
Site visit or send-in evaluation
Send the encoder and motor labels, drive model, alarm history and both connector views. Say whether the problem began after cable work, encoder replacement or a drive change. We can confirm visit scope or send-in evaluation and timing from those details.