What specialist testing can show
TI-5000JX bench. Separate resolver windings and excitation from harness or receiver faults on the matching branch.
TI-3000JX motor run. TI-3032 is the power lead in the illustrated example. Verify the run configuration separately.
Starting lead. TI-5920 for the illustrated resolver connection
MOOG G/G4xx Resolver Motor Feedback technical reference
Find your part number
Compare the fitted feedback label, complete motor order and connector. A motor order and an encoder MPN identify different items.
| ID or order | How to identify it |
|---|---|
| G / G4xx resolver option | Mitchell documents this as a common configuration. The motor label and build drawing establish the installed feedback. |
| G-4 resolver drawing | MOOG’s Compact Dynamic catalogue shows the resolver version of this frame. Use the order-specific envelope and connector dimensions. |
| Encoder or custom pigtail build | MOOG offers customized feedback and connections. Choose the drawing and tester lead for the fitted assembly. |
Production and end-of-life status
Confirm orderability and any replacement with the manufacturer against the full fitted ID. The linked documents identify the documented setup.
Specifications
| Parameter | Verified scope |
|---|---|
| Feedback | Passive resolver on the documented branch. One excitation winding path and sine and cosine return paths. |
| Fitted data needed | Use the exact winding or motor drawing for excitation, transformation ratio and resolver speed. |
| Bench connector | TI-5920 matches the illustrated resolver connection. TI-3032 is the illustrated power lead. |
Interface and measuring method
The drive excites the resolver and derives angle from the ratio and polarity of the sine and cosine returns. Swapped pairs or a loose rotor can give a smooth reading with the wrong angle. A resistance check establishes winding or cable continuity only.
Mounting and fit
Check the MOOG G-4 outline and the fitted rear assembly. Note resolver mounting depth and rotor-to-stator locating features before removal. Confirm the shaft engagement and fastener arrangement for the complete build.
Wiring and connector scope
Map the two contacts in each of the excitation, sine and cosine circuits using the matching MOOG drawing. Read windings only with the feedback disconnected from both tester and drive. A powered resolver test uses the specified excitation in the approved fixture.
Internal motor and machine cables
TI-5920 is the test cable for Mitchell’s illustrated branch. A terminal box or custom pigtail needs a drawing from the exact G/G4xx order. Record separate test cable, machine lead and motor-internal wire identifiers.
Fault checks
Use the site’s isolation procedure before opening a connector or checking resistance. Secure the load against motion, lock out relevant energy sources, wait the specified discharge time and have a qualified technician verify isolation. Follow the OEM procedure for any retention battery.
What can I check on the machine?
Disconnect the harness at both ends. Check end-to-end continuity against the exact drawing, then check for unintended shorts between conductors and to the shell or shield. Compare against the documented shield bonds. Inspect pins, keying, debris, moisture and latch engagement. Check clamps or fasteners only where accessible under the approved procedure.
A resolver is passive. Check isolated winding continuity against the matching drawing. Use the specified AC excitation on the approved test fixture for a signal check.
| Symptom | What to verify |
|---|---|
| Sine and cosine both absent | Check excitation and continuity to the resolver before condemning both return windings. |
| One return weak or absent | Separate that return pair from the cable and compare it with the motor drawing. Inspect the connector for spread contacts or moisture. |
| Angle tracks but the motor commutates poorly | Check the winding pair assignment, rotor fixing and alignment record. Confirm drive configuration. |
Angle of alignment and commissioning
Capture the original electrical reference and rotation convention for the actual motor. Confirm resolver speed, polarity and phase sequence. Have a specialist verify the resulting angle with the approved motor setup before restoring operation.
Motor and drive applications
MOOG G / G4xx brushless servo motors
Confirm the actual motor build and resolver drawing. Custom connector and feedback options affect fit.
Drawings, pin maps and manuals
- MOOG Motors. G/G4xx section. Resolver wiring and matching cable.
- MOOG Compact Dynamic motor catalogue. Manufacturer reference for the indicated motor or feedback option. Check the fitted revision.
- MOOG Compact Dynamic operating manual. See the resolver signal connector and ordering code. Follow the installation drawing supplied with the motor.
- MOOG Compact Dynamic motor family. Manufacturer family page and drawings.
Questions
Can I use a similar label as a replacement?
Compare the interface, mechanical fit, connector, data or commutation requirements and OEM option before choosing a substitute. The ID table gives the useful distinctions for this guide.
What information helps with a diagnosis?
Send the encoder and motor labels, drive model, alarm history and both connector views. Say whether the problem began after cable work, encoder replacement or a drive change. We can confirm visit scope or send-in evaluation and timing from those details.
Site visit or send-in evaluation
Send the encoder and motor labels, drive model, alarm history and both connector views. Say whether the problem began after cable work, encoder replacement or a drive change. We can confirm visit scope or send-in evaluation and timing from those details.