What specialist testing can show
TI-5000JX bench. Check excitation path, winding continuity and tracking with the documented resolver setup.
TI-3000JX motor run. Confirm the full motor order, power lead, phase reference and supported TI-3000JX setup.
Starting lead. TI-5923 resolver branch. Match the separate TI-3040 power lead only where the fitted plug agrees.
Pacific Scientific PMA Series Servo Motor Resolver Feedback technical reference
Find your part number
Compare the fitted feedback label, complete motor order and connector. A motor order and an encoder MPN identify different items.
| ID or order | How to identify it |
|---|---|
| PMA Series resolver | Named Mitchell test branch. Verify the termination and resolver drawing. |
| PMA secondary feedback option | The motor archive documents configurations with an added encoder provision. Identify the primary resolver first. |
| TI-3040 power branch | Separate PMA 6-contact M23 power/brake connection where fitted. |
Production and end-of-life status
Confirm orderability and any replacement with the manufacturer against the full fitted ID. The linked documents identify the documented setup.
Specifications
| Parameter | Verified scope |
|---|---|
| Feedback method | Passive resolver excitation and two angular returns. |
| Starting lead | TI-5923 for PMA resolver. Confirm the fitted connector. |
| Mechanical reference | The OEM catalogue gives frame and mounting options, including smooth or keyed output shafts by order. |
Interface and measuring method
The drive excites the resolver and reads the sine and cosine returns. Use the specified excitation and ratio for an angle test. Isolated winding continuity and live signal quality answer different questions.
Mounting and fit
Match the PMA frame and motor drawing before opening the rear assembly. Record mounting, shaft reference and cable route.
Wiring and connector scope
Use the exact resolver winding map to identify excitation and returns. Verify shield and mating view and keep the power/brake connection separate.
Internal motor and machine cables
Record the original feedback termination and the drive extension. TI-5923 identifies the resolver test path. Select the actual production harness by motor and drive order.
Fault checks
Use the site’s isolation procedure before opening a connector or checking resistance. Secure the load against motion, lock out relevant energy sources, wait the specified discharge time and have a qualified technician verify isolation. Follow the OEM procedure for any retention battery.
What can I check on the machine?
Disconnect the harness at both ends. Check end-to-end continuity against the exact drawing, then check for unintended shorts between conductors and to the shell or shield. Compare against the documented shield bonds. Inspect pins, keying, debris, moisture and latch engagement. Check clamps or fasteners only where accessible under the approved procedure.
A resolver is passive. Check isolated winding continuity against the matching drawing. Use the specified AC excitation on the approved test fixture for a signal check.
| Symptom | What to verify |
|---|---|
| No angle at the drive | Check excitation and the isolated winding path. |
| Angle intermittent | Check both returns and cable movement. |
| Angle stable but commutation fault | Check phase reference, direction and drive selection. |
Angle of alignment and commissioning
Record the original angle, direction and phase reference. Check the drive motor definition and resolver settings before specialist alignment.
Motor and drive applications
Pacific Scientific PMA with the documented resolver option
Identify the PMA resolver connection and distinguish feedback failure from winding, cable and drive faults.
Drawings, pin maps and manuals
- Mitchell Test Cable Index by Manufacturer Support. Pacific Scientific section, TI-5923 PMA resolver and TI-3040 PMA power lead
- Pacific Scientific PMA motor selection guide, Kollmorgen archive. Supplementary reference for the stated model or setup.
- Kollmorgen Pacific Scientific legacy archive. Download page for the original PMA/PMB/S/R motor catalogue.
Questions
Can I use a similar label as a replacement?
Compare the interface, mechanical fit, connector, data or commutation requirements and OEM option before choosing a substitute. The ID table gives the useful distinctions for this guide.
What information helps with a diagnosis?
Send the encoder and motor labels, drive model, alarm history and both connector views. Say whether the problem began after cable work, encoder replacement or a drive change. We can confirm visit scope or send-in evaluation and timing from those details.
Site visit or send-in evaluation
Send the encoder and motor labels, drive model, alarm history and both connector views. Say whether the problem began after cable work, encoder replacement or a drive change. We can confirm visit scope or send-in evaluation and timing from those details.