Site visit or send-in evaluation
Share the feedback label, complete motor or machine order, drive model and alarm. Include both connector faces and note whether the issue followed a cable change, replacement or mechanical work.
What specialist testing can show
TI-5000JX bench. Mitchell describes electronic similarity with TS5645 and a different package.
TI-3000JX motor run. Exact N122 motor run setup open
Tamagawa TS5645N122 Meiden Motor Serial Feedback technical reference
Find your part number
Use the full fitted label. A motor order identifies the assembly and should be recorded separately from an encoder part number.
| ID or order code | Identification and scope |
|---|---|
| TS5645N122 | Mitchell’s Meiden example with a different package from the TS5645 comparison. |
| TS5645 | Related electronic family according to Mitchell. Match N122 mounting and connector independently. |
Production and end-of-life status
Confirm current orderability and any successor for the exact ID with the manufacturer or motor OEM. The dated documentation identifies the configuration.
Specifications
| Parameter | Verified scope |
|---|---|
| Family | Tamagawa serial feedback under the TS5645 branch in the Mitchell training manual. |
| Mechanical scope | Mitchell notes a different package for N122. Obtain the exact mating drawing. |
| Connection | Confirm the fitted N122 and Meiden connector, wiring and supply before powering the assembly. |
Mounting and fit
Compare the original housing, shaft engagement, fastening and cable exit. Record the full Meiden motor order and the N122 label. Similar serial behavior does not establish fit.
Interface and measuring method
Check for serial identity, a repeatable position response and error status using the documented setup for the actual N122 assembly. Use the fitted drawing to identify any additional signal or retention conductors.
Wiring and connector scope
Obtain the exact Meiden motor and N122 encoder connector diagrams before making a breakout. The training chapter describes electronic similarity at family level. It does not establish every N122 contact.
Cables inside the motor and at the machine
The Mitchell index lists TI-5619 for a separate Meiden ABZ/serial application. Use it as a research lead only until the exact N122 connector and wiring match are documented.
Fault checks
Before inspection. Follow the site’s isolation and lockout procedure. Secure any load against movement, allow the specified discharge time and have a qualified technician verify isolation. Check resistance on a disconnected harness at both ends. Use the documented shield and return connections.
| Observation | What to verify |
|---|---|
| Related TS5645 fits electronically but housing differs | Compare shaft and housing drawings before accepting a substitute. |
| No reply with a Meiden family lead | Confirm the exact N122 pin map, profile and supply path. |
| Position or reference error follows disassembly | Check seating and captured OEM reference before changing parameters. |
Motor and drive applications
Meiden motors. Full order open. Check the exact ID, drive and connector before applying an installation or test procedure.
Check housing and mounting before considering another TS5645. Obtain a connector map for N122.
Angle of alignment and commissioning
Capture the existing motor reference and feedback position before work. Use the Meiden service procedure for the installed assembly. Verify the original mechanical and electrical relationship after fitting.
Drawings, pin maps and manuals
- Tamagawa training chapter. Types Supported. TS5645N122 package and Meiden application.
- Mitchell test cable index. TI-5619 is a Meiden family lead. The exact N122 pairing remains open.