What specialist testing can show
TI-5000JX bench. Generic Incremental count and separate UVW commutation checks. Confirm the fitted connector.
TI-3000JX motor run. Exact motor-run setup open.
Starting lead. TI-5015 for the documented connector and feedback type
Yaskawa UTOPI-600VA ABZ and UVW Incremental Encoder technical reference
Find your part number
Compare the fitted feedback label, complete motor order and connector. A motor order and an encoder MPN identify different items.
| ID or order | How to identify it |
|---|---|
| UTOPI-600VA | Mitchell’s example of a Yaskawa encoder with separate differential U, V and W commutation. Verify the complete motor order. |
| UTOPH-81AWF | Multiplexed C-channel branch. It requires a different commutation test arrangement. |
| UTOMA family label | Mitchell distinguishes these legacy absolute versions from the stated UTOP incremental example. Match the exact part. |
Production and end-of-life status
Confirm orderability and any replacement with the manufacturer against the full fitted ID. The linked documents identify the documented setup.
Specifications
| Parameter | Verified scope |
|---|---|
| Position | Mitchell reports 24,000 quadrature counts per revolution for the UTOPI-600VA setup. |
| Commutation | Separate U, V, W true and complement signals on the documented branch. |
| Test lead | TI-5015 with Generic Incremental for the matching connector. |
Interface and measuring method
A and B track motion, Z establishes the incremental reference, and independent UVW pairs report electrical commutation states. Verify count direction and the commutation state relative to the actual motor phase convention.
Mounting and fit
Record the encoder seating, mechanical clocking and shaft fixing before removal. Compare the fitted drawing and full motor order for dimensions and clearance. Use the label on the actual cover or encoder body.
Wiring and connector scope
Use the TI-5015 pin reference and matching Yaskawa drawing. Trace the quadrature and commutation pairs separately. Keep each true line paired with its complement and match the connector view.
Internal motor and machine cables
TI-5015 is the tester lead. Obtain the internal and drive-side harness references from the exact legacy motor order. Connector shape alone cannot establish a C-channel or separate-UVW wiring assignment.
Fault checks
Use the site’s isolation procedure before opening a connector or checking resistance. Secure the load against motion, lock out relevant energy sources, wait the specified discharge time and have a qualified technician verify isolation. Follow the OEM procedure for any retention battery.
What can I check on the machine?
Disconnect the harness at both ends. Check end-to-end continuity against the exact drawing, then check for unintended shorts between conductors and to the shell or shield. Compare against the documented shield bonds. Inspect pins, keying, debris, moisture and latch engagement. Check clamps or fasteners only where accessible under the approved procedure.
Use only the OEM-approved powered check and a suitable breakout. A qualified technician can compare the voltage across the specified supply and return with the model’s limits under the stated test conditions. A multimeter can check supply health. Signal integrity and communications require the appropriate signal test.
| Symptom | What to verify |
|---|---|
| Correct counts but poor torque | Check the independent UVW pairs and their phase relationship, then inspect encoder fixing and drive phase configuration. |
| One commutation state fails | Inspect the matching true and complement conductors and test the isolated cable. Compare to the verified fixture. |
| Direction or reference appears reversed | Verify A/B phase, Z path, coupling and counting convention before changing the drive setup. |
Angle of alignment and commissioning
Capture the incoming mechanical position, phase convention and commutation sequence with the approved setup. Verify the index behavior and motor-specific angle after fitting.
Motor and drive applications
Legacy Yaskawa. Exact fitted motor order open.
Distinguish separate UVW pairs from the multiplexed C-channel type. Record the fitted wiring before removal.
Related SpareFaber guides
Drawings, pin maps and manuals
- Yaskawa Legacy Encoders. Quadrature Incremental with UVW Commutation Channels. UTOPI-600VA and TI-5015.
- Mitchell pin and test cable references. Use the TI-5015 sheet for the matching Yaskawa connector.
Questions
Can I use a similar label as a replacement?
Compare the interface, mechanical fit, connector, data or commutation requirements and OEM option before choosing a substitute. The ID table gives the useful distinctions for this guide.
What information helps with a diagnosis?
Send the encoder and motor labels, drive model, alarm history and both connector views. Say whether the problem began after cable work, encoder replacement or a drive change. We can confirm visit scope or send-in evaluation and timing from those details.
Site visit or send-in evaluation
Send the encoder and motor labels, drive model, alarm history and both connector views. Say whether the problem began after cable work, encoder replacement or a drive change. We can confirm visit scope or send-in evaluation and timing from those details.