Site visit or send-in evaluation
Share the full feedback ID, machine or motor order code, drive or controller model and fault history. Send photos of the label, mating connectors and mounting. Tell us if the fault followed a repair, cable change or controller replacement. Request a UAE site visit or bench evaluation.
What specialist testing can show
Mitchell documents supported β-family serial profiles. Verify the βiA128 profile, pole count, exact connector adapter and firmware for bench testing. A bench reading can help isolate the encoder from the machine harness. Check TI-3000JX motor-running support separately before any run test.
FANUC βiA128 A860-2020-T301 Serial Pulsecoder technical reference
Find your part number
Use the full label and suffix. The main reference is A860-2020-T301. The related rows identify distinct configurations or label codes. Match the actual assembly before substituting.
| Exact ID or order code | Mechanical configuration | Electrical or service distinction |
|---|---|---|
| A860-2020-T301 | Standard maintenance pulsecoder for the βiS or βiF X=3 motor codes in the FANUC table. | βiA128 serial absolute feedback. Match the amplifier and machine reference procedure. |
| A860-2020-T321 | The table pairs this with #0100 on the listed βiS or βiF orders. | Separate OEM maintenance part for the specified motor option. |
| A860-2020-T361 | Listed separately for βiSc X=7 motors. | Use the βiSc motor documentation and actual label. |
Production and end-of-life status
The listed technical records identify this model. Confirm current production and orderability for the exact suffix with the manufacturer when sourcing a replacement.
Specifications
| Parameter | Value and scope |
|---|---|
| Identity | FANUC maintenance appendix identifies βiA128 for the standard T301 ordering row. |
| Connection | Serial pulsecoder path through the matching motor feedback connector and amplifier. Confirm the motor model before using a diagram. |
| Absolute retention | CNC/amplifier battery arrangement retains the machine's absolute reference as documented by FANUC. Verify the installed architecture. |
| Fit | Use the exact motor specification, mechanical replacement drawings and factory service parts. |
The values in this table apply to the reference build unless a row identifies another scope. Main technical PDF.
Mounting and fit
Read the motor's full A06B specification before removing the cover. Check the coupling, retaining method and keyed features against its service drawing. Record evidence of shaft play, coupling damage, moved witness marks or a cable pulled tight before adjusting anything. Obtain the specified torque and extraction procedure from the matching FANUC manual.
Interface and measuring method
The βiA128 is a serial pulsecoder. The amplifier reads motion feedback from it and the CNC can use the absolute reference when supported by the machine's battery configuration. Loss of the reference and loss of serial communication require separate checks. Start with the exact alarm and the affected axis.
Verified wiring
Use the FANUC βi motor feedback diagram for the exact A06B order and amplifier. Verify the two connector faces, the power and return, serial pair and any separate battery path. The maintenance appendix identifies the replacement part. It does not establish one universal connector assignment for every βi motor.
Cables inside the motor and at the machine
Identify the motor-side connector, drive feedback port and the machine cable drawing or cable label. Match the mating shell, key and shield connection. A similar-looking αi connector or a different βi motor suffix can call for another harness. Confirm the exact installed cable before choosing a replacement or tester adapter.
Fault checks
External checks. Record the exact label, alarm, drive status and when the fault occurs. Look for visible plug damage, contamination, cable strain and looseness without opening a live assembly.
Isolation before internal work. Follow your site’s lockout procedure. Secure the load against movement, isolate all motor, drive and separate feedback supplies, allow the specified discharge time and verify absence of voltage. A qualified technician should perform internal and electrical checks. Unplug or reconnect only with the applicable circuits safely de-energized.
Harness continuity. Check resistance only on a harness you can disconnect from both the device and the receiver. Compare with shorted meter leads, flex gently at strain reliefs, and test for unintended shorts between conductors and to the shield. Use the schematic to recognize intended bonds. Keep resistance and insulation testers away from connected electronics.
| Observation | What to verify |
|---|---|
| Serial feedback alarm | Inspect connectors and the isolated harness. Compare the documented supply and serial activity at both ends in the approved diagnostic setup. |
| Battery warning or lost absolute reference | Use the amplifier's battery and alarm chapter. Identify the affected group of axes and preserve recorded reference information. |
| Smooth serial reading, unexpected machine motion | Check the mechanical coupling and motor and drive configuration. Validate machine reference and direction before service return. |
Powered checks. A qualified technician can fit an approved breakout while de-energized, secure motion, and compare documented supply and return at both ends under the specified load. Use the approved receiver or instrument to observe data or signal pairs. Return to an isolated state before changing connections.
Motor and drive applications
The maintenance table lists T301 under the standard βiS/βiF motor configuration with X=3. FANUC separates βiSc and other options in the same table. Confirm the actual motor tag and CNC/amplifier software before using maintenance settings.
Angle of alignment and commissioning
Use the FANUC and machine builder replacement procedure to record the prior reference and establish the axis datum after fitting. Restore absolute reference only in the approved commissioning state. Obtain the correct motor-specific encoder positioning procedure before any commutation adjustment.
Drawings, pin maps and manuals
- Main technical PDF. Start with the exact type or variant marked in the guide.
- Manufacturer or exact product reference. Use the order code and select the applicable downloads.
- Mitchell FANUC serial feedback chapter. Use for identifying supported profiles and adapter scope.
- βi maintenance parts and alarm chapters. Use the standard X=3 row and the amplifier-specific battery chapter.