Site visit or send-in evaluation
Share the full encoder ID, motor code and serial, drive model, battery alarms and the point at which position was lost. Tell us whether the machine was moved with the drive off, the battery was disconnected, or the bearings or encoder were replaced. Use the enquiry form to share the details.
What specialist testing can show
Mitchell documents a TI-5000JX workaround using its EQI1131 EnDat selection. In that configuration, the encoder-ID field can be misleading, a count test can flag the padded bit as stuck, and the display shows only 12 of the 16 turn bits. Ask which EBI profile is available in the current Athena release before judging the encoder. A supported B&R memory profile can read the incoming motor alignment on documented 8LVA builds.
HEIDENHAIN lists the PWM 21 / ATS ExI mounting wizard for 820725-xx. Mitchell documents a TI-3000JX Generic Endat RunSer → EQ…31 selection for compatible motors. Verify the motor data, feedback direction, alignment and adapter before using a secured, guarded run fixture. Mitchell EBI 1135 test and profile notes · HEIDENHAIN mounting-wizard list (PDF)
HEIDENHAIN EBI 1135 EnDat22 Encoder technical reference
Find your part number
Use the full number on the encoder, including the final two digits. EBI 1135 and ECI 1118 can look similar and use a 15-pin connector. In this EBI assembly, contacts 11 and 12 carry the backup battery circuit.
| Manufacturer ID | Connector and mount | What to verify |
|---|---|---|
| 820725-11 | 70E / 82C, bent radial 15-pin, D740560 | Exact catalogue specifies the BBMT rotation-counter overflow message is deactivated for this ID. |
| 820725-01 | 70E / 82C, 5ZS15-RK, EBI battery pin map | Same mounting-sheet group. Confirm the suffix-specific diagnostic configuration with HEIDENHAIN. |
| 820725-02 | 70E / 82C, 5ZS15-RK, EBI battery pin map | Same mounting-sheet group. Confirm the suffix-specific diagnostic configuration with HEIDENHAIN. |
| 749596-01 | 70E / 82C, 5PS15-RK, EBI battery pin map | Different connector style code. Check mating-plug clearance and OEM order documentation. |
A deactivated overflow message affects how the system reports that event. Confirm the machine’s method for detecting position loss or reconciling a rollover. Exact -11 record · EBI 1135 ID and pin list (PDF)
Production and end-of-life status
HEIDENHAIN provides a catalogue record for 820725-11. Current manufacturing, last-time-buy and availability for the exact suffix require confirmation. Reviewed 7 November 2026. 820725-11 exact record
Specifications
| Parameter | Value |
|---|---|
| Measuring method | Inductive absolute, battery-backed multiturn, without an integral bearing |
| Position data | 262,144 distinct positions per revolution (18 bits). Serial position field is 19 bits with LSB fixed at zero. 65,536 distinguishable turns. |
| Main supply Uₚ | 3.6–14 V DC. Typical 80 mA at 5 V without load in normal operation. |
| Backup supply Uᵦₐₜ | 3.6 V nominal, 5.25 V maximum per exact catalogue. Use the motor maker’s approved pack and replacement procedure. |
| Mechanical limits | ≤12,000 rpm for 820725-xx. Published permissible axial motion ±0.3 mm. |
| Fit and environment | Ø36.83 mm synchro flange, Ø6 mm blind bore × 2.8 mm depth, −20 to +115 °C, IP00. |
Use the actual motor and drive operating limits. The position-word length explains why a tester can show a fixed bit even when the underlying position is changing correctly. Exact manufacturer record · EBI 1135 specifications and bit-width note (PDF)
Mounting and fit
The motor shaft and bearings locate the encoder rotor. Seat the Ø6 mm bore on the motor shaft and clamp it with the specified central screw. Seat the stator on the 70E flange register and tighten the flange clamps evenly per the motor procedure. Inspect the shoulders for debris, burrs and fretting, and check for bearing float if the fault began after overhaul.
For the assembly in 1148241-90, HEIDENHAIN specifies a self-locking ISO 4762 M3×16 A2 central screw at 1.2 ±0.1 N·m. Use the correct locking screw and apply the OEM clamp specification separately. Check mating dimensions and scanning clearance with the supported wizard after assembly. 70E / 82C assembly, bolt and mating dimensions (PDF)
Interface and measuring method
The drive clocks a digital EnDat22 transaction and receives absolute position and status on the DATA pair. The inductive sensor gives angle within one turn when powered. The separate backup input supports the turn counter when the main encoder supply is off. Loss of backup can corrupt the turn history even though the angle within the current turn still responds.
Check three observations separately after a fault. Confirm smooth one-turn position, then confirm the expected turn field and backup status, and finally check the machine’s established position against a known safe reference. Preserve the incoming data before any approved reset.
Verified wiring
Use the two-row view and key in the EBI portion of the mounting sheet. The M12 column refers to the HEIDENHAIN EBI 1135 battery-backup connection in brochure 208922. An OEM motor may use a different bulkhead or route the battery elsewhere.
| Function | Encoder PCB | EBI M12 |
|---|---|---|
| Main Uₚ / 0 V | 13 / 14 | 8 / 5 |
| Uᵦₐₜ / 0 V battery | 11 / 12 | 2 / 1 |
| DATA / complement | 7 / 8 | 3 / 4 |
| CLOCK / complement | 9 / 10 | 7 / 6 |
| Vacant on the 820725-11 encoder | 1–6 and 15 | Use the drawing for the mating connector. |
The OEM drawings show the encoder 0 V and battery return bonded internally. Check battery polarity using its own return at the documented test point. The same numbered M12 pins can mean supply sense on another EnDat assembly. EBI PCB pin layout (PDF) · Separate EBI motor-side map (PDF)
Cables inside the motor and at the machine
| Ordering ID | What it connects |
|---|---|
| 804201-xx | EBI 1135 15-pin PCB connector to 8-pin M12 male flange socket. Eight 0.16 mm² TPE wires in an unshielded net sleeve. Check length suffix. |
| 1120947-xx | Documented 15-pin PCB to 9-pin M23 SpeedTEC angled male flange lead family. Confirm EBI applicability, wiring revision and any separate wires before ordering. |
For a B&R motor, identify the motor’s actual cable arrangement and approved loom separately. 8LVA order codes include separate connections and hybrid options. The generic HEIDENHAIN lead does not establish the original B&R loom number. HEIDENHAIN EBB accessory compatibility and leads (PDF) · B&R motor order key
Fault checks
Before opening the machine. Preserve the incoming position and follow the OEM backup-battery procedure. The battery can keep feedback circuitry energized after drive isolation. Follow your site’s lockout procedure. Secure the load against movement, isolate all motor, drive and separate feedback supplies, allow the specified discharge time and verify absence of voltage. A qualified technician should perform internal and electrical checks. Unplug or reconnect only with the applicable circuits safely de-energized. Treat the battery circuit as a separate source and have a qualified technician verify the test state before disconnecting it.
- Inspect and record. Save position, drive and backup alarms, label photos and connector views. Inspect retention, pin damage, dirt, pinched wiring, rotor seating and flange clamping without disturbing the existing reference.
- Isolated cable checks. Disconnect the feedback harness from both electronics and any battery source under the approved procedure. With the harness isolated from the encoder and receiver at both ends, use resistance mode. First short the meter probes to establish lead resistance. Check each conductor end to end and flex the cable gently at the strain relief. Check between unrelated wires and from signal wires to shield or shell. Expect open only where the drawing calls for isolation. Compare any intentional sense links or shield bonds with the equipment drawing. Keep insulation testers away from connected electronics.
- Measure supplies separately. An approved insulated breakout is required for live checks by a qualified technician. Use DC voltage across PCB 13/14 for the main supply and 11/12 for backup on this map. Compare the battery measurement with the OEM’s under-load method. Fit and remove test connections with the applicable circuits safely off.
- Interpret the result. No serial count calls for main supply and DATA/CLOCK checks. A count that wraps correctly within one turn but loses travel after a power cycle points to the backup path or drive position handling. Dropout that follows shaft movement or bearing work calls for a clearance check. A false stuck bit on the documented tester workaround calls for a supported profile before condemning the encoder.
Motor and drive applications
B&R lists EBI 1135 for the B1 battery-backed EnDat option on 8LVA motors, including order code 8LVA23.B1030D000-0 in its standard-motor table. Mitchell documents EBI 1135 testing on 8LVA motors and links a similar 8LVA23.B1030D027-0 data sheet. Read the actual encoder suffix from the motor. The motor order code identifies the feedback family and connector option, while the encoder label identifies the installed part. B&R feedback options · B&R standard motor orders · Mitchell 8LVA example
Angle of alignment and commissioning
A battery-backed turn count, the machine datum and the motor’s commutation reference serve different purposes. Mitchell documents unique B&R 8LVA motor alignment in supported encoder memory. Save the original data and measured direction or angle using the documented test convention. Restore only the approved motor-specific data to a compatible replacement on the same motor, then read it back. Verify mounting and commutation separately and perform the OEM procedure to re-establish the machine reference if turns were lost. Use the motor serial number to obtain authorized data if the original memory is unreadable.
Drawings, pin maps and manuals
- HEIDENHAIN 1148241-90 mounting sheet (PDF). 70E / 82C, exact ID groups, battery pins and central screw. If the link redirects, request the document by number.
- HEIDENHAIN 208922 servo encoder brochure (PDF). Pages 35, 68–69 and 92 for mounting, EBI 1135 specifications and battery pin layouts.
- HEIDENHAIN EBB 4000 accessory information (PDF). See the EBI 1135 cable rows.
- B&R 8LVA user’s manual download. Use the English manual for motor connectors, installation and the supported drive.
- Mitchell EBI 1135 test notes. Read the software-profile limitations before interpreting a test.