Site visit or send-in evaluation
Share the full feedback ID, machine or motor order code, drive or controller model and fault history. Send photos of the label, mating connectors and mounting. Tell us if the fault followed a repair, cable change or controller replacement. Request a UAE site visit or bench evaluation.
What specialist testing can show
An approved EnDat01 reader with the matching 12-pin adapter can check angle and frame errors. Use an approved analogue breakout to compare both incremental tracks through a controlled turn. Verify exact Mitchell profile, harness and firmware before selecting a tester or trying a motor run.
HEIDENHAIN ECN 1313 EnDat01 1 Vpp Encoder technical reference
Find your part number
Use the full label and suffix. The main reference is 768295-03. The related rows identify distinct configurations or label codes. Match the actual assembly before substituting.
| Exact ID or order code | Mechanical configuration | Electrical or service distinction |
|---|---|---|
| 768295-03 | 65 mm mating diameter, expanding-ring coupling 06, shaft 65B. | EnDat01, 8,192 positions, 2,048 analogue periods/rev, 400 kHz −3 dB cutoff. |
| 768295-11 | Expanding-ring coupling 06 and the same 65B shaft type. | 8,192 absolute positions with 512 analogue periods/rev and 130 kHz cutoff. Check drive interpolation settings. |
| 768295-12 | Coupling 07B adds the torque-support ridge. Check the mating housing. | 2,048 analogue periods/rev and EnDat01. Verify fit separately from signal format. |
Production and end-of-life status
The listed technical records identify this model. Confirm current production and orderability for the exact suffix with the manufacturer when sourcing a replacement.
Specifications
| Parameter | Value and scope |
|---|---|
| Absolute / incremental | 13-bit singleturn binary position over EnDat01. Nominal 1 Vpp incremental A/B, 2,048 periods/rev on -03. |
| Supply / connector | 3.6–14 V DC on the exact -03 record. Locked, straight 12-contact double-row encoder plug. |
| Shaft / coupling | Integral bearing, 1:10 taper with 9.25 mm functional diameter, shaft 65B and expanding ring 06. |
| Environment | −40 to +115 °C and IP40 on the exact -03 record. |
| Bandwidth | 400 kHz cutoff at −3 dB. Apply the separate mechanical and drive limits for the actual motor. |
The values in this table apply to the reference build unless a row identifies another scope. Main technical PDF.
Mounting and fit
Seat the 65B taper and retain it per the OEM motor instructions. The encoder's expanding ring anchors the stator in the 65 mm mating bore. The elevator-family PDF illustrates multiple constructions, so obtain the 06 coupling drawing for this exact build. Check the actual mating bore and seating surface before using a replacement.
On an isolated, secured motor, inspect the retaining hardware, cable strain and signs that the stator moved. Use the documented back-off and removal method. Obtain torque, seating and alignment figures for the motor order code.
Interface and measuring method
The drive requests absolute shaft angle over EnDat01 clock and data. It can interpolate the separate sine/cosine tracks for finer incremental feedback. A healthy analogue pair can coexist with a serial fault. The absolute reading and incremental periods per turn are different specifications, especially when comparing -03 and -11.
Verified wiring
Page 4 of the elevator product information gives the ECN 1313 12-contact and 17-contact assignments in separate rows. These are the 12-contact PCB designations for the documented EnDat01 family connection. Check the physical view and the exact D323746 drawing before transferring wires.
| Function | Contacts in the family drawing |
|---|---|
| Supply / return | 6a UP, 3a 0 V |
| Supply sense / return sense | 1b UP sense, 4b 0 V sense |
| A+ / A− | 2a / 5b |
| B+ / B− | 4a / 3b |
| EnDat data pair | 6b and 1a |
| EnDat clock pair | 2b and 5a |
Use the overbar markings in the source for serial pair polarity. Keep sense connections and shield treatment per the complete motor loom drawing. Use the separate M23 row only for the documented 17-pin connection.
Cables inside the motor and at the machine
Confirm the motor order number and the actual encoder-side 12-pin plug, motor bulkhead and drive connector. Select an OEM or HEIDENHAIN loom for the exact connection and length. The PDF pin table helps trace a matching loom. It does not identify every internal assembly used by motor builders.
Fault checks
External checks. Record the exact label, alarm, drive status and when the fault occurs. Look for visible plug damage, contamination, cable strain and looseness without opening a live assembly.
Isolation before internal work. Follow your site’s lockout procedure. Secure the load against movement, isolate all motor, drive and separate feedback supplies, allow the specified discharge time and verify absence of voltage. A qualified technician should perform internal and electrical checks. Unplug or reconnect only with the applicable circuits safely de-energized.
Harness continuity. Check resistance only on a harness you can disconnect from both the device and the receiver. Compare with shorted meter leads, flex gently at strain reliefs, and test for unintended shorts between conductors and to the shield. Use the schematic to recognize intended bonds. Keep resistance and insulation testers away from connected electronics.
| Observation | What to verify |
|---|---|
| Drive cannot read absolute angle | Check EnDat01 selection, documented supply and sense at the encoder under load, then both clock and data pairs. |
| Absolute angle valid, speed feedback poor | Check both analogue tracks and drive line count, particularly after a 512-period variant has been fitted. |
| Fault follows motor work | Inspect taper seating, stator anchoring and the cable clamp, then validate the OEM commutation reference. |
Powered checks. A qualified technician can fit an approved breakout while de-energized, secure motion, and compare documented supply and return at both ends under the specified load. Use the approved receiver or instrument to observe data or signal pairs. Return to an isolated state before changing connections.
Motor and drive applications
HEIDENHAIN documents ECN 1313 in elevator and servo drive feedback. Verify the motor order and shaft arrangement before applying the family drawing. See the ERN 1387 guide for the separate incremental model.
Angle of alignment and commissioning
Record the drive and motor reference before removal. Fit the stator and rotor per the 06 installation, then use the OEM commissioning procedure to establish electrical reference and direction. A singleturn absolute angle can be valid even when the drive's motor offset is incorrect.
Drawings, pin maps and manuals
- Main technical PDF. Start with the exact type or variant marked in the guide.
- Manufacturer or exact product reference. Use the order code and select the applicable downloads.
- 512-period variant. Exact 768295-11 record.
- 07B coupling variant. Exact 768295-12 record.
- Connector diagrams. Use the ECN 1313 row and confirm the mating view.
- Exact D323746 pin drawing reference. The exact download redirected to the manufacturer maintenance page during review.