Heidenhain EQN 1325.SSI-2048 Insall on Servo Motor | Adjust, Align, Signal Check _ Service at your Site in UAE

Heidenhain EQN 1325 -2048 SSI Encoder Insall Align on Stromag Servo Motor

$80.00
Zu Produktinformationen springen
Heidenhain EQN 1325.SSI-2048 Insall on Servo Motor | Adjust, Align, Signal Check _ Service at your Site in UAE

Heidenhain EQN 1325 -2048 SSI Encoder Insall Align on Stromag Servo Motor

  • Established in 2003, Ajman Factories is pioneers in Servo motor repairing in United Arab Emirates
  • in 2006- First Importer of Mitchell system in United Arab Emirates.
  • Servo motor repairs using Mitchell Electronics, Inc. (MEI) TI-5000JX & Run Test Equipment TI-3000JX system
  • Supporting Maintenance teams | Motor rewinders Repair Servo motors In house in UAE with Mitchell | Heidenhain | Sick | Baumer |Dynapar |Schneider Servo Repair Specialised Equipment ( Hire Equipment Time/ Engineering service) 

Request Servo System Troubleshooting, Repair or Mainenance Service with Mitchell Electronic Inc. TI-5000JX Encoder Alignment and | TI-3000JX servo motor run test equipment

Experiencing Servo Motor Errors | Servo Motor Alarms | - Heidenhain- Sick - Hengstler Encoder Faults, other Machine Fault? Cable Broken- Need Repair/ Replacement? Tell us about your machine, describe the fault, and upload supporting screenshots or photographs. Our technical team will review your request for online assistance or a field visit.

1. Contact Details

2. Type of Assistance Required

Select consultation type *

3. Servo Motor Information

4. Nature of Machine Problem

Include actual measurements, axis details, cutting conditions and fault history where relevant.

5. Upload Screenshots, Photos & PDFs

Attach Alarm code, Name Plate Photo, Machine setup, Encoder Connector| Power connector Photographs or Application relevant diagrams.

JPG, PNG or PDF. Maximum 10 MB combined. Up to 6 files.

Only upload documents and images you are authorised to share. Do not include passwords or confidential production information.

Submission is a request for assistance. An appointment is confirmed only after our team contacts you.

Stromag Servo SSI Motor Feedback  Testing, Repair and Alignment Service of HEIDENHAIN EQN 1325-2048 SSI Absolute Encoder at your site in UAE

We test Heidenhain Absolute Multi Turn SSI encoders fitted on Stromag Servo motors EQN 1325.SSI-2048. We Provide service at YOUR Site in UAE for repair or replace it and align it to the rotor of your Servo Motor.

Pin out of Stromag M23 Connector and signals are :

Servo motors Brands using this Encoder:  Baumüller, AMK, and Lenze.

We Arrange visit of our Expert engineer with Mitchell Electronics, Inc. Servo Motor Testing & Encoder Encoder Testing, Diagnosis, Alignment, Memory Report, Programming Equipments :

  • TI-5000JX is a servo motor feedback tester
  • The TI-3000JX is a servo motor run test equipment 
  • We have different modules  for interfacing different Encoders ( SSI, hiperface,1vss,TTL, HTl, SSI) and  cables specific to encoder / servo motor model etc.
  •  We have Ready made cables for hooking this encoder to our Servo motor testing system.. 
  • Our expert services and Equipment time include : Servo Motor Repair Products for Encoder alignment and servo motor run test

  • Encoder testing Products : for Encoder Testing, Diagnosis, Alignment, Memory Report, Programming

    • Encoder Testing | Servo repair Support in the Factory - At Your Site in UAE

    • Reduce downtime - lets help you plan for Same day Servo motor Repair. Lets help you move towards and achieve 100% Uptime of your Servo Setup.

    • Implement Quality Assurance - Know condition of your servo motor and ensure Quality Production

    • Condition Monitoring / Preventive maintenance - Know the Current Signal performance of Encoders and know if it about to fail and plan Next replacement.

    • Pro-Active Maintenance- Record Alignment of All your Servo motor encoders in Advance.

Here are Details | Example uses | bit of Specification of EQN 1325-2048 SSI 

Pin out of Stromag M23 Connector and signals are :

TI-5049 Cable Pinouts - Stromag/SSI EQN 1325/ECN 1313 M23 17 pin
Signal 8 Pin Header 14 Pin TB Pin # Conductor Color
 +5V 6 1 RED
0V 7 2 WHT
A+ 1 3 BLK
A- 2 4 BRN
B+ 3 5 ORG
B- 4 6 YEL
+ DATA_ 10 9,11,13 GRN
- DATA_ 11 10,12,14 BLU
Signal PIN # 12 Pin TB: PIN % Conductor Color
+ CLOCK 12 3 VIO
- CLOCK_ 13 4

GRY

 

 

 The HEIDENHAIN EQN 1325-2048 SSI | Heidenhain EQN 1325.SSI-2048. Id.Nr. 628 866-01.  is a high-precision Optical Absolute Multiturn Rotary Encoder specifically configured with a Synchronous Serial Interface (SSI). Unlike the standard SSI versions which run on lower DC voltages, the SSI configurations are typically engineered with wide-range power supplies to interface with universal industrial PLCs, CNC controllers, and older or specialized drive systems that require a legacy SSI protocol.

1. Technical Specifications (EQN 1325-2048 SSI)

• Scanning Principle: Optical scanning with integral bearings and a mounted stator coupling.
• Data Interface: SSI (Variants: SSI01r1 or SSI07r1) with pure binary or Gray code output.
• Singleturn Resolution: 8,192 positions per revolution (13-bit absolute resolution).
• Multiturn Tracking Range: 4,096 revolutions (12-bit multi-turn tracking via internal gear clockwork).
• Incremental Signals (Line Count): 2048 Sin/Cos lines (~1 Vpp analog output for real-time speed loops).
• Mechanical Connection: 9.25 mm tapered shaft (1:10 taper) with a 06 stator coupling expanding ring.
• Electrical Connection: Typically a 16-pin (12+4) PCB connector under the rear housing cap.
• Supply Voltage: DC 4.75 V to 30 V (An expanded high-voltage tolerance unique to the SSI variant).
• Max Permissible Speed: 12,000 rpm.
• Operating Temperature: -40 °C to +115 °C.

2. Servo Motor Brands & Drive Controllers Using This SSI Version

While EnDat dominates mainstream European servo motors, the SSI-variant EQN 1325 is typically selected for heavy industrial drives, feedback loops linking directly to automated PLCs, or specialized machine axes.
• Custom / Heavy-Duty Servo Motors: Used by specialized manufacturers like Baumüller, AMK, and Lenze for older system replacements or heavy-machinery servo motors feeding position directly back to high-voltage automation cabinets.
• Direct-to-PLC Systems: Perfect for motors interfacing directly with master controllers from Beckhoff (via SSI input terminals), Allen-Bradley/Rockwell Automation, or Siemens SIMATIC S7 automation systems where EnDat evaluation hardware isn't installed.
• Retrofit CNC & Injection Molding Machines: Found frequently on specialized axis systems or auxiliary machinery lines where robust, noise-immune 24V-level SSI transmissions are required over longer cable runs.

3. Complete Part Numbers & Verified Id.Nr. (HEIDENHAIN SSI)

Because HEIDENHAIN produces these under dedicated part matrices for different SSI clock frequencies and code variations, verifying the exact ID number is critical:
Standard Model Designation Examples:
• HEIDENHAIN EQN 1325.048-2048 |  HEIDENHAIN EQN 1325.020-2048
Verified ID Numbers (Id.Nr.) for SSI Series:
• ID 1353128-xx / ID 1353130-xx: The modern, current generation HEIDENHAIN primary part sequence for the EQN 1325 SSI tapered shaft configurations.
• ID 655251-01 / ID 655251-51: Highly common older industrial generation part numbers for the EQN 1325.048-2048 series.
• ID 586651-01: Legacy series ID number found on older machinery variants that can be converted directly into newer SSI groupings.
• ID 538234-01 / ID 538234-51: Early production multi-turn legacy versions operating on standard industrial networks.

Specifications of : EQN1325

  1. Absolute : EQN 1325
    Interface SSI
    Ordering designation SSI07r1
    Position values per rev. 8192 (13 bits)
    Revolutions  4096 (12 bits)
    Electrically permissible speed/error2)-15000 rpm/±12 LSB
    Calculation time tcal  5 µs
    Incremental signals » 1 VPP
    Line count* 512 2048
    Cutoff frequency –3 dB  500 kHz
    System accuracy 512 lines: ±60”; 2048 lines: ±20”
    Pin layout Heidenhain EQN 1325 and ECN 1325 SSI01r1  SSI07r1
    Electrical connection 16-pin (12+4) PCB connector
    Supply voltage 4.75 V to 30 V DC 
    Power consumption  (maximum) = 4.75 V:  675 mW | 30 V:  875 mW
    Current consumption (typical) 5 V: 70 mA (without load) 5 V: 85 mA (without load)
    Shaft Tapered shaft ¬ (9.25 mm); taper: 1:10
    Mech. permiss. shaft speed n  15000 rpm  12000 rpm
    Starting torque (typical) 0.01 Nm (at 20 °C)
    Moment of inertia of rotor 2.6 · 10–6 kgm2
    Natural frequency fN (typical) 1800 Hz
    Permissible axial motion of measured shaft = ±0.5 mm
    Vibration 55 Hz to 2000 Hz | Shock 6 ms =  300 m/s2 3) (EN 60068-2-6) |  2000 m/s2 |  (EN 60068-2-
    Operating temperature –40 °C to 115 °C
    Protection EN 60529 IP40 when mounted
    Mass  0.25 kg
    ID number 1353130-xx

Other Types Supported

The following list shows the Heidenhain serial encoders that are either currently supported by the TI-5000JX or are under development and will soon be supported:Professional service engineer visits for installing, servo motor feedback encoder. We Send our Engineer with specialist Mitchell Electronics testing equipment to your site  

Type Format Serial Incremental Cnt/RevCnt/Rev Cables
ECI 1317-32 Endat 131072 128 TI-5059 (B+R)
ECN 125 Endat 33,554,432 0 TI-5662
ECN 1313-2048 Endat 8,192 8,192 TI-5031 (Siemens), T15043 Baldor), TI-5059 (Bosch/B+R)
ECN 1313-512 Endat 8,192 2,048 TI-5059 (Bosch/B+R)
EQI 1325-32 Endat 8,192 128 TI-5031 (Siemens)
EQI 1327-32 Endat 32,768 128 TI-5059 (B+R)
EQI 1329-32 Endat 131072 128 TI-5059 (B+R)
EQN 1325-2048 Endat 8,192 8,192 TI-5031 (Siemens), T15043 (Baldor), TI-5059 (Bosch/B+R)

 

 


  Why User should NOT Attempt Removal of Heidenhain Factory Fitted Encoders  ? Why you should call Expert Help for Dismantling Encoders from Servo Motor
For Dismantling Resolver Encoder special tools, Care and Expertise is Needed. Any Misadventure, or excess enthusiasm in dismantling without Tools means inviting disaster for encoder. so stop and ask for expert help. Specialist support can help reduce the risk of damage during removal. Send us the equipment model, installation details and photographs so we can assess your requirements and advise on the appropriate service.
 Can you Replace Heidenhain SSI Type Encoder on Servo motor at our Site? Can you Program it & Align its Rotary Angle?
If the EQI encoder used on your Servo Motor, has failed or needs Alignment or testing, then we are perfectly equipped to handle its installation, Checking, Recording alignment and restoring new encoder to same angular alignment. the Equipment supplied by Mitchell Electronics Inc. TI-5000JX supports it fully with Siemens Memory Programming test to write a new angle into the memory data that matches your current alignment.

================

What does the Specialist Service Engineer Visit include?

Book a professional service engineer from Ajman Factories Equipment Trading to visit your factory, workshop or machine site for specialized servo motor feedback testing, troubleshooting, encoder installation, adjustment and alignment.

Depending on the motor, encoder and site conditions, our services include:

  • Servo motor encoder and resolver health checks
  • Encoder signal inspection and feedback diagnostics
  • Investigation of communication errors and feedback faults
  • Encoder installation, replacement and mechanical adjustment
  • Encoder-to-motor commutation alignment and verification
  • Feedback parameter and encoder memory checks, where supported
  • Verification following encoder replacement or motor repair
  • Compatible servo motor run testing, where safe and practical

You may book our service for diagnosis and testing alone. Encoder replacement or complete motor repair is not always necessary.

 Can you replace and align Heidenhain EQN SSI Version  encoders at our factory?

We offer specialist assessment and field replacement services for compatible Heidenhain ECN Endat motor feedback encoders installed on servo motors.

Our engineer can evaluate the existing feedback system, inspect encoder signals and investigate faults before proceeding with removal or replacement.

Where motor design, compatibility, mechanical access and available technical data permit, we can undertake encoder installation, adjustment and alignment using appropriate specialist test equipment.

Some applications require the motor to be disconnected, removed or transferred to a suitable testing area before alignment can be performed safely.

Our objective is to reduce unnecessary component replacement and avoid avoidable machine downtime while restoring reliable feedback operation wherever technically feasible.

View an example of our servo motor feedback alignment service

Can you diagnose encoder problems without replacing the encoder?

Yes. You can book our service engineer to evaluate the condition of an existing servo motor feedback system without requesting encoder replacement.

We can inspect feedback signals, investigate encoder communication faults, check for diagnostic errors, assess alignment and verify motor feedback performance using appropriate equipment.

Rather than relying on basic electrical checks alone, we use dedicated testing instruments to investigate the feedback system and help identify the likely cause of the reported problem.

The objective is to help distinguish encoder-related problems from other possible causes, avoid unnecessary component replacement and identify a practical repair approach.

What specialist testing and alignment equipment do you use?

Ajman Factories Equipment Trading has been using Mitchell Electronics equipment since 2016.

We have invested in specialized servo motor feedback testing, diagnostic and alignment systems for our workshop and travelling service operations.

Mitchell Electronics TI-5000JX – Feedback Test & Alignment System

Our primary platform for compatible servo motor encoder and resolver diagnostics, feedback signal testing, encoder alignment verification and electronic commutation alignment.

Depending on feedback-system compatibility, it enables communication checks, signal monitoring, diagnostic investigation and examination of motor-to-encoder alignment.

Mitchell Electronics TI-3000JX – Servo Motor Run Test System with Amplifier

A specialized system used to evaluate compatible servo motors independently of their original machine drives.

Where safe and appropriate, unloaded motor run tests can help assess operation and feedback performance before or after repair.

Supporting Modules, Cables and Adapters

We maintain a comprehensive range of interface modules, cables, adapters and supporting accessories for different servo motor and feedback configurations.

Additional OEM-Specific Instruments

We also use specialist encoder inspection, diagnostic and alignment verification equipment from manufacturers including HEIDENHAIN, Baumer and Heidenhain.

Equipment is selected for each assignment according to the motor, feedback technology and technical compatibility.

Do you offer on-site engineer visits across the UAE?

Yes. We offer professional on-site service arrangements across the United Arab Emirates, including:

Dubai | Abu Dhabi | Sharjah | Ajman | Other Emirates

Our engineer can visit your factory, workshop or machine location with specialist diagnostic instruments and compatible Mitchell Electronics testing equipment.

Where site access, equipment compatibility and safe working conditions permit, testing and troubleshooting can be performed at your facility.

Some encoder replacement, alignment or motor run-testing procedures may require the motor to be electrically isolated, disconnected, removed from the machine or transferred to a suitable testing area.

Our objective is to establish the nature of the fault before recommending unnecessary motor removal, transportation or component replacement.

Visit availability and technical requirements are confirmed before scheduling.

Can customers outside the UAE ship their servo motors to you?

Yes. We offer workshop-based inspection, diagnostic and repair arrangements for customers in:

Saudi Arabia | Oman | Qatar | Bahrain | Other International Locations

Contact Ajman Factories Equipment Trading before sending your servo motor or feedback assembly to our UAE workshop.

Our team can inspect the equipment, investigate reported faults and perform applicable testing, alignment or repair procedures.

Return shipment can be arranged following completion of the agreed service.

International shipping, customs clearance, repair estimates and return arrangements are confirmed separately.

 Which kind of Motors use SSI Encoder System? whats the advatage of SSI then
• No Homing Required:
 The Absolute SSI encoder remembers the actual position of the motor shaft even when the power is on. After a power failure, the system does not need to re-homing or find the zero-point.
• High-speed and sync data transmission:
 It uses synchronous clock signal, which allows data to be transferred between the controller and encoder in a very fast and noise-free manner.
• Less wiring and higher reliability:
 Compared to incremental or parallel encoders, it requires significantly fewer wires. The use of differential signal pairs ensures no signal degradation even over long cable distances.
• Improved dynamics and error detection:
 Some SSI encoders also offer the option of Sin/Cos analog output or extended data (parity/alarm bits), allowing for real-time control of servo drives and fault/alarm monitoring.
• High Precision:
 It ensures micro-level positioning and repeatability in industrial automation, robotics, CNC machines and multi-axis systems.

================

 What is SSI communication interface for servo systems?

SSI (Synchronous Serial Interface) encoder feedback in servo motor systems .It is an absolute encoder protocol that transmits the precise position of the motor shaft in digital form 

a bit of detail on SSI : Interface SSI position values
The position value is transmitted, starting with the most significant bit (MSB), over the data lines (DATA) in synchronism with a clock signal (CLOCK) provided by the control. The SSI standard data word length for singleturn encoders is 13 bits, and for multiturn encoders, 25 bits. In addition to
the absolute position values, incremental signals can transmitted as well. For a description of the signals,  
The following functions cannot be activated via programming inputs:
• Direction of rotation
SSI Signal for Heidenhain Encoder Data transmission• Zero reset (setting to zero)

These features and benefits have made it a standard and globally established interface within the following industries:

  • Machine tools
  • Electronics
  • Automation
What information do you need to arrange a service visit?

To arrange a specialist service engineer visit or workshop inspection, please contact Ajman Factories Equipment Trading with the following information:

  • Machine manufacturer and model
  • Servo motor make and complete model or part number
  • Encoder manufacturer and exact model or part number
  • Servo drive or controller model, where available
  • Fault description, alarm codes or observed symptoms
  • Factory or machine location
  • Whether you require on-site service or workshop repair

Photographs of the motor nameplate, encoder label, connectors and relevant alarm messages are especially helpful.

We will review your information, assess technical compatibility, confirm the proposed service scope and advise on equipment requirements and visit arrangements.

Are all encoder testing and alignment procedures supported?

Availability of testing, encoder programming, memory operations, electronic or mechanical alignment and servo motor run testing depends on the exact equipment configuration.

Important considerations include:

  • Servo motor manufacturer and model
  • Encoder and feedback technology
  • Servo drive and controller configuration
  • Availability of suitable technical data
  • Test equipment and interface compatibility
  • Electrical isolation and safe working conditions
  • Mechanical access and site conditions

Diagnosis may establish that additional components, replacement parts or workshop repairs are necessary.

A successful repair, encoder alignment or restoration of motor operation cannot be guaranteed before technical assessment.

========

 

+

TI-5094Stegmann_Hiperface_SKS/SKM_SEL/SEK_Direct-to-Encoder_Feedback_Test_Cable_8_pin_JST_(Requires_TI-5104)

+

Alignment is done as per the video instructions of Original Encoder alignment equipment manufacturer ie. Mitchell Electronics. This is done at your Own Site in UAE. No need to ship your motor out. 

Encoder Alignment Made Easy

TI-5000JX Feedback Tester by Mitchell Electronics, Inc.

The TI-5000JX is a servo motor feedback tester product which is used to test the encoder or resolver that is used on a permanent magnet brushless AC or DC servo motor. Servo motor testing and troubleshooting requires the confirmation of certain key parameters.

There are many reasons a servo motor may stop working. In many cases the servo motor can be easily repaired, and in other cases the servo motor may not even be broken. It is necessary to test the servo motor feedback device, verify proper counting, and check for the presence of encoder error codes


 

Universal Servo Motor Run Testing

TI-3000JX Run Test Product by Mitchell Electronics, Inc.

The TI-3000JX is a servo motor run test product which is used to run a permanent magnet brushless AC or DC servo motor. A servo motor run test system acts as a universal servo motor drive providing a diagnostic test before or after a servo motor repair.

Manufacturer specific servo motor drives have many complicated features and can be optimized for many customer applications but can be difficult and time consuming to configure. And besides, it is also not always practical to have a spare servo motor drive for every servo motor that you wish to run. The TI-3000JX acts as a generic servo motor drive enabling the configuration of an unloaded servo motor run test in a matter of seconds in a standardized way regardless of the servo motor manufacturer.

  • Signal Check, Testing HEIDENHAIN EQN 1325.SSI-2048 on Stromag
  • Troubleshooting stromag Servo motor Fitted with EQN 1325 SSI 2048 Encoder
  • Repair for Stromag Servo Motor HEIDENHAIN EQN 1325-2048 SSI
  • Diagnosis of Signal Errors HEIDENHAIN EQN13252048 SSI Encoders Using Mitchell Ti-5000 JX
  • We Offer Repair, Adjustment, Alignment EQN 1325.SSI-2048 Heidenhain Encoder using Mitchell Ti-5000 on Stromag Baumüller, AMK, and Lenze
  • We do Angle Alignment of EQN 1325.SSI-2048 on Stromag servo motors. using Mitchell Ti-5000 JX at Your site in UAE

CNC Machine Brands | Types We Support

We offer inspection, diagnostics and selected repair services for CNC Machine Tools of Following types from the brands below. Service availability depends on the model, condition and required work.

• DMG MORI • Mazak / Yamazaki Mazak • Haas Automation • Okuma • Fanuc • DN Solutions • Makino • Trumpf • Siemens • Hwacheon • SMTCL • Hardinge / Bridgeport • Hurco • Emco • GROB & Chiron • Tornos & Studer • Bystronic & Amada • Sodick • Brother • Kitamura • Matsuura • Miyano & Citizen • Nakamura-Tome • Tsugami

Servo Systems | Types We Support

We offer inspection, diagnostics and selected repair services for Servo Motors | Drives of Following types from the brands below. Service availability depends on the model, condition and required work.

Can’t see your Machine brand? Send us the Machine Name/ model and a clear nameplate photograph so we can check.

ABB • Advanced Motion Controls (AMC) • AMK Motion • Baldor • Baumueller |Baumüller • Beckhoff • Bosch |Rexroth | Indramat • Delta Electronics • FANUC Corporation • Fuji Electric • Kollmorgen • Lenze • Mitsubishi • Moog • Omron • Pansonic • Allen-Bradley • Sanyo Denki • Schneider Electric • Siemens • Tamagawa Seiki • Yaskawa

Can’t see your Servo Motor Brand? Send us the Motor Name/ model and a clear nameplate photograph so we can check.

Encoder Brands We Support

We offer inspection, diagnostics and selected repair services for encoders from the brands below. Service availability depends on the model, condition and required work.

Baumer | Thalheim | IVO, Henglster, Indramat | Rexroth, Kubler, Leine linde, Lika, Renco, Sanyo Denki, Sick | Stegmann, Sumtak, Tamagawa, Acu-Rite Solutions, Allen Bradley Rockwell, ASM (Automation Sensorik Messtechnik GmbH), Automation Direct, Autonics, Avtron Encoders, Balluff, BEI, CHANG SING | etek, Delta Electronics, DRC | Dynamic Research Corporation, Dynapar, Elcis, ELCO, Encoder Products Company, Euchner, Fagor, GIVI MISURE S.R.L, Hanyoung Nux, Heidenhain, HOHNER, Hontko, Hubner Berlin, IFM Electronics, Koyo | JTEKT, Kwangwoo, LS Electric | MECAPION | LSIS, METIRIO, MFE | Panasonic, Nemicon, OMRON, Ono-Sokki, Pepperl + Fuchs, portescap, Posital, Red Lion Encoders, RSF Austria, SCANCON, Sensata | Newall, SensorLab, Siemens, SIKO, Sony/Magnescale, Stegmann, Tamagawa, TEKEL, TIMKEN, TR Electronic, US Digital, Wachendorff

Can’t see your brand? Send us the encoder model and a clear nameplate photograph so we can check. Independent service provider. Brand names identify equipment we support and do not imply manufacturer authorisation or affiliation.

Servo Motor Repair-Inspection-Health Check-Alignment FAQs

Answers to common questions about encoder checks, alignment, repairs and sending equipment to our Ajman workshop.

What does the Servo motor Encoder Alignment service offer ?

Servo motors are Used on Automated machines controlled by CNC, PLC. To function properly, permanent magnet brushless motors depend on position feedback devices such as Hall Effect transducers, resolvers, incremental encoders, and serial encoders which require precise alignment. We have invested in Purchase & Licensing of Mitchell Electronics, Inc. products to meet the maintenance challenges presented by these modern motors and feedback devices. We can assure First Time Fix & Factory Quality Alignment using such world renowned equipment

Why did you Trust Mitchell Electronics as Supplier for Feedback alignment system ?

"Ajman Factories" established our base in UAE way back in 2003, We already use encoder diagnostic equipment from Heidenhain, Sick and Baumer, and Calibration equipment from Renishaw. When in came to choosing our Partners in Servo Motor Encoder Alignment Equipment, in order to Compliment what equipment we already had, We chose Mitchell Electronics. We could not have settled for any less than Mitchell, Given their Proven track record in support and DNA of Innovation built, They are the World leaders in Servo motor repair/ alignment equipment. Learn more about them at https://www.mitchell-electronics.com/about-us/|| How can you support our Target of 100% Uptime of our Machinery ? We can ensure 100% uptime for your Servo systems using the Predictive Maintenace progam developed by our Company. We can ensure Same Day Repair of Most Servo motors. Contact us with your Machine, motor details and we talk.

We want to Ensure same day repair for our Servo motor. How can it be made Possible?

We can ensure Same Day Repair of Most Servo motors. We have pro Active Maintenace program for servo motors specifically targeted to achieve your uptime, and machine effectivenss objectives. Contact us with your Machine, motor details and we talk.

Not sure if the problem is Motor ? Or Drive ? Or Encoder or Evaluation electronics Can you Help??

Yes our Engineer visits you with Mitchell Electronics TI-5000JX & TI-3000JX Test Equipment. We can check operation of Feedback system at Site & identify signal errors if there is any. Once you know the encoder Feedback is in Working order you can concentrate on other issues.

I have a Heavy motor Removing and Shipping Costs time/ Money. can you Replace encoder | Align encoder at Site. ??

Yes our Engineer visits you with Mitchell Electronics TI-5000JX & TI-3000JX Test Equipment. We shall Record the alignment of Old encoder and install new encoder in its place. You can provide the encoder or you can Order the encoder from us prior to the visit.

Do you have Ready Stock Encoders/ motorfeedbacks in stock?

We stock incremental Rotary encoders, absolute encoders and Resolvers of different types e.g. Quadature, SSI, Endat, Hiperface, Profibus etc..

What types of CNC Machines Spares do you stock?

We stock Linear scales, rotary encoders, servo drive cards, cables, connectors, pneumatic parts, Hydraulic actuators, servo motors, drives, fuse, fans and Sensors for ATC and turret encoders ...etc.

Can you repair encoder connectors and cables?

We offer encoder connector repair or replacement and encoder cable repair, subject to inspection and the availability of suitable parts. Please include photographs of any visible damage when sending your enquiry.

Do you offer PPR programming or encoder memory backup?

PPR programming, memory backup, copying and restoration are available for compatible encoder models. Send us the exact model details and your requirements so we can confirm whether these services are supported.

Where are you located?

Ajman Factories Equipment is located in Ajman, United Arab Emirates. Contact us before visiting or sending equipment so we can provide the workshop location and receiving instructions.

When was Ajman Factories Equipment established?

Ajman Factories Equipment was established in 2003.

How do I ship a faulty Servo Motor for reconditioning to you?

Send us a service request with the Servo motor make, model, fault description and your contact details. We will send you a Material Shipping Note with the delivery instructions. Include a copy of the note with your shipment so we can identify your encoder on arrival.

What information should I include in my service request?

Please include the make and model, clear nameplate and connector photographs, a description of the fault, and the machine or motor on which it is installed. Let us know whether you require workshop testing or an on-site visit.

Shop The Full Collection

04998359 SEW Eurodrive - BE5A/28NM/WB400

1051000 EBI INOX Bevel Mite® 230V Anfasmaschine für INOX | Edelstahl-Kantenverrundung/ Anfasen von Platten/ Rohren

11 µAPP | 11 µASS (Sinusoidal-Current signals) Encoder Error Diagnostic Signal check Service| Repair - OnSite Wiring Installation

1123110 (ABIS-B) Pneumatische Kantenfräsmaschine zum Anfasen und Verrunden

1123110 (ABIS-B) Pneumatische Kantenfräsmaschine zum Anfasen und Verrunden

Angebotspreis  $1,297.00 Normaler Preis  $1,400.00