Heidenhain EQN 1325.SSI-2048 Insall on Servo Motor | Adjust, Align, Signal Check _ Service at your Site in UAE
- Established in 2003, Ajman Factories is pioneers in Servo motor repairing in United Arab Emirates
- in 2006- First Importer of Mitchell system in United Arab Emirates.
- Servo motor repairs using Mitchell Electronics, Inc. (MEI) TI-5000JX & Run Test Equipment TI-3000JX system
- Supporting Maintenance teams | Motor rewinders Repair Servo motors In house in UAE with Mitchell | Heidenhain | Sick | Baumer |Dynapar |Schneider Servo Repair Specialised Equipment ( Hire Equipment Time/ Engineering service)
Request Servo System Troubleshooting, Repair or Mainenance Service with Mitchell Electronic Inc. TI-5000JX Encoder Alignment and | TI-3000JX servo motor run test equipment
Experiencing Servo Motor Errors | Servo Motor Alarms | - Heidenhain- Sick - Hengstler Encoder Faults, other Machine Fault? Cable Broken- Need Repair/ Replacement? Tell us about your machine, describe the fault, and upload supporting screenshots or photographs. Our technical team will review your request for online assistance or a field visit.
Only upload documents and images you are authorised to share. Do not include passwords or confidential production information.
Submission is a request for assistance. An appointment is confirmed only after our team contacts you.
HEIDENHAIN EQN 1325-2048 SSI Absolute Encoder Testing, Repair and Alignment Service at your site in UAE
We test Heidenhain Absolute Multi Turn SSI encoders EQN 1325.SSI-2048. We Provide service at YOUR Site in UAE for repair or replace it and align it to the rotor of your Servo Motor.
Servo motors Brands using this Encoder: Baumüller, AMK, and Lenze.
We Arrange visit of our Expert engineer with Mitchell Electronics, Inc. Servo Motor Testing & Encoder Encoder Testing, Diagnosis, Alignment, Memory Report, Programming Equipments :
- TI-5000JX is a servo motor feedback tester
- The TI-3000JX is a servo motor run test equipment
- We have different modules for interfacing different Encoders ( SSI, hiperface,1vss,TTL, HTl, SSI) and cables specific to encoder / servo motor model etc.
- We have Ready made cables for hooking this encoder to our Servo motor testing system..
Our expert services and Equipment time include : Servo Motor Repair Products for Encoder alignment and servo motor run test
Encoder testing Products : for Encoder Testing, Diagnosis, Alignment, Memory Report, Programming
Encoder Testing | Servo repair Support in the Factory - At Your Site in UAE
Reduce downtime - lets help you plan for Same day Servo motor Repair. Lets help you move towards and achieve 100% Uptime of your Servo Setup.
Implement Quality Assurance - Know condition of your servo motor and ensure Quality Production
Condition Monitoring / Preventive maintenance - Know the Current Signal performance of Encoders and know if it about to fail and plan Next replacement.
Pro-Active Maintenance- Record Alignment of All your Servo motor encoders in Advance.
Here are Details | Example uses | bit of Specification of EQN 1325-2048 SSI
The HEIDENHAIN EQN 1325-2048 SSI | Heidenhain EQN 1325.SSI-2048. Id.Nr. 628 866-01. is a high-precision Optical Absolute Multiturn Rotary Encoder specifically configured with a Synchronous Serial Interface (SSI). Unlike the standard SSI versions which run on lower DC voltages, the SSI configurations are typically engineered with wide-range power supplies to interface with universal industrial PLCs, CNC controllers, and older or specialized drive systems that require a legacy SSI protocol.
1. Technical Specifications (EQN 1325-2048 SSI)
• Scanning Principle: Optical scanning with integral bearings and a mounted stator coupling.
• Data Interface: SSI (Variants: SSI01r1 or SSI07r1) with pure binary or Gray code output.
• Singleturn Resolution: 8,192 positions per revolution (13-bit absolute resolution).
• Multiturn Tracking Range: 4,096 revolutions (12-bit multi-turn tracking via internal gear clockwork).
• Incremental Signals (Line Count): 2048 Sin/Cos lines (~1 Vpp analog output for real-time speed loops).
• Mechanical Connection: 9.25 mm tapered shaft (1:10 taper) with a 06 stator coupling expanding ring.
• Electrical Connection: Typically a 16-pin (12+4) PCB connector under the rear housing cap.
• Supply Voltage: DC 4.75 V to 30 V (An expanded high-voltage tolerance unique to the SSI variant).
• Max Permissible Speed: 12,000 rpm.
• Operating Temperature: -40 °C to +115 °C.2. Servo Motor Brands & Drive Controllers Using This SSI Version
While EnDat dominates mainstream European servo motors, the SSI-variant EQN 1325 is typically selected for heavy industrial drives, feedback loops linking directly to automated PLCs, or specialized machine axes.
• Custom / Heavy-Duty Servo Motors: Used by specialized manufacturers like Baumüller, AMK, and Lenze for older system replacements or heavy-machinery servo motors feeding position directly back to high-voltage automation cabinets.
• Direct-to-PLC Systems: Perfect for motors interfacing directly with master controllers from Beckhoff (via SSI input terminals), Allen-Bradley/Rockwell Automation, or Siemens SIMATIC S7 automation systems where EnDat evaluation hardware isn't installed.
• Retrofit CNC & Injection Molding Machines: Found frequently on specialized axis systems or auxiliary machinery lines where robust, noise-immune 24V-level SSI transmissions are required over longer cable runs.3. Complete Part Numbers & Verified Id.Nr. (HEIDENHAIN SSI)
Because HEIDENHAIN produces these under dedicated part matrices for different SSI clock frequencies and code variations, verifying the exact ID number is critical:
Standard Model Designation Examples:
• HEIDENHAIN EQN 1325.048-2048 | HEIDENHAIN EQN 1325.020-2048
Verified ID Numbers (Id.Nr.) for SSI Series:
• ID 1353128-xx / ID 1353130-xx: The modern, current generation HEIDENHAIN primary part sequence for the EQN 1325 SSI tapered shaft configurations.
• ID 655251-01 / ID 655251-51: Highly common older industrial generation part numbers for the EQN 1325.048-2048 series.
• ID 586651-01: Legacy series ID number found on older machinery variants that can be converted directly into newer SSI groupings.
• ID 538234-01 / ID 538234-51: Early production multi-turn legacy versions operating on standard industrial networks.
Specifications of : EQN1325
- Absolute : EQN 1325
Interface SSI
Ordering designation SSI07r1
Position values per rev. 8192 (13 bits)
Revolutions 4096 (12 bits)
Electrically permissible speed/error2)-15000 rpm/±12 LSB
Calculation time tcal 5 µs
Incremental signals » 1 VPP
Line count* 512 2048
Cutoff frequency –3 dB 500 kHz
System accuracy 512 lines: ±60”; 2048 lines: ±20”
Electrical connection 16-pin (12+4) PCB connector
Supply voltage 4.75 V to 30 V DC
Power consumption (maximum) = 4.75 V: 675 mW | 30 V: 875 mW
Current consumption (typical) 5 V: 70 mA (without load) 5 V: 85 mA (without load)
Shaft Tapered shaft ¬ (9.25 mm); taper: 1:10
Mech. permiss. shaft speed n 15000 rpm 12000 rpm
Starting torque (typical) 0.01 Nm (at 20 °C)
Moment of inertia of rotor 2.6 · 10–6 kgm2
Natural frequency fN (typical) 1800 Hz
Permissible axial motion of measured shaft = ±0.5 mm
Vibration 55 Hz to 2000 Hz | Shock 6 ms = 300 m/s2 3) (EN 60068-2-6) | 2000 m/s2 | (EN 60068-2-
Operating temperature –40 °C to 115 °C
Protection EN 60529 IP40 when mounted
Mass 0.25 kg
ID number 1353130-xx
Other Types Supported
The following list shows the Heidenhain serial encoders that are either currently supported by the TI-5000JX or are under development and will soon be supported:Professional service engineer visits for installing, servo motor feedback encoder. We Send our Engineer with specialist Mitchell Electronics testing equipment to your site
| Type | Format | Serial Incremental | Cnt/RevCnt/Rev | Cables |
| ECI 1317-32 | Endat | 131072 | 128 | TI-5059 (B+R) |
| ECN 125 | Endat | 33,554,432 | 0 | TI-5662 |
| ECN 1313-2048 | Endat | 8,192 | 8,192 | TI-5031 (Siemens), T15043 Baldor), TI-5059 (Bosch/B+R) |
| ECN 1313-512 | Endat | 8,192 | 2,048 | TI-5059 (Bosch/B+R) |
| EQI 1325-32 | Endat | 8,192 | 128 | TI-5031 (Siemens) |
| EQI 1327-32 | Endat | 32,768 | 128 | TI-5059 (B+R) |
| EQI 1329-32 | Endat | 131072 | 128 | TI-5059 (B+R) |
| EQN 1325-2048 | Endat | 8,192 | 8,192 | TI-5031 (Siemens), T15043 (Baldor), TI-5059 (Bosch/B+R) |
================
================
========
+

+
Alignment is done as per the video instructions of Original Encoder alignment equipment manufacturer ie. Mitchell Electronics. This is done at your Own Site in UAE. No need to ship your motor out.
TI-5000JX Feedback Tester by Mitchell Electronics, Inc.
The TI-5000JX is a servo motor feedback tester product which is used to test the encoder or resolver that is used on a permanent magnet brushless AC or DC servo motor. Servo motor testing and troubleshooting requires the confirmation of certain key parameters.
There are many reasons a servo motor may stop working. In many cases the servo motor can be easily repaired, and in other cases the servo motor may not even be broken. It is necessary to test the servo motor feedback device, verify proper counting, and check for the presence of encoder error codes
Universal Servo Motor Run Testing
TI-3000JX Run Test Product by Mitchell Electronics, Inc.
The TI-3000JX is a servo motor run test product which is used to run a permanent magnet brushless AC or DC servo motor. A servo motor run test system acts as a universal servo motor drive providing a diagnostic test before or after a servo motor repair.
Manufacturer specific servo motor drives have many complicated features and can be optimized for many customer applications but can be difficult and time consuming to configure. And besides, it is also not always practical to have a spare servo motor drive for every servo motor that you wish to run. The TI-3000JX acts as a generic servo motor drive enabling the configuration of an unloaded servo motor run test in a matter of seconds in a standardized way regardless of the servo motor manufacturer.
- Signal Check, Testing HEIDENHAIN EQN 1325.SSI-2048
- Troubleshooting HEIDENHAIN EQN 1325.SSI-2048 encoder
- Repair for HEIDENHAIN EQN 1325-2048 SSI
- Diagnosis of Signal Errors HEIDENHAIN EQN13252048 SSI Encoders Using Mitchell Ti-5000 JX
CNC Machine Brands | Types We Support
We offer inspection, diagnostics and selected repair services for CNC Machine Tools of Following types from the brands below. Service availability depends on the model, condition and required work.
• DMG MORI • Mazak / Yamazaki Mazak • Haas Automation • Okuma • Fanuc • DN Solutions • Makino • Trumpf • Siemens • Hwacheon • SMTCL • Hardinge / Bridgeport • Hurco • Emco • GROB & Chiron • Tornos & Studer • Bystronic & Amada • Sodick • Brother • Kitamura • Matsuura • Miyano & Citizen • Nakamura-Tome • Tsugami
Servo Systems | Types We Support
We offer inspection, diagnostics and selected repair services for Servo Motors | Drives of Following types from the brands below. Service availability depends on the model, condition and required work.
Can’t see your Machine brand? Send us the Machine Name/ model and a clear nameplate photograph so we can check.
ABB • Advanced Motion Controls (AMC) • AMK Motion • Baldor • Baumueller |Baumüller • Beckhoff • Bosch |Rexroth | Indramat • Delta Electronics • FANUC Corporation • Fuji Electric • Kollmorgen • Lenze • Mitsubishi • Moog • Omron • Pansonic • Allen-Bradley • Sanyo Denki • Schneider Electric • Siemens • Tamagawa Seiki • Yaskawa
Can’t see your Servo Motor Brand? Send us the Motor Name/ model and a clear nameplate photograph so we can check.
Encoder Brands We Support
We offer inspection, diagnostics and selected repair services for encoders from the brands below. Service availability depends on the model, condition and required work.
Baumer | Thalheim | IVO, Henglster, Indramat | Rexroth, Kubler, Leine linde, Lika, Renco, Sanyo Denki, Sick | Stegmann, Sumtak, Tamagawa, Acu-Rite Solutions, Allen Bradley Rockwell, ASM (Automation Sensorik Messtechnik GmbH), Automation Direct, Autonics, Avtron Encoders, Balluff, BEI, CHANG SING | etek, Delta Electronics, DRC | Dynamic Research Corporation, Dynapar, Elcis, ELCO, Encoder Products Company, Euchner, Fagor, GIVI MISURE S.R.L, Hanyoung Nux, Heidenhain, HOHNER, Hontko, Hubner Berlin, IFM Electronics, Koyo | JTEKT, Kwangwoo, LS Electric | MECAPION | LSIS, METIRIO, MFE | Panasonic, Nemicon, OMRON, Ono-Sokki, Pepperl + Fuchs, portescap, Posital, Red Lion Encoders, RSF Austria, SCANCON, Sensata | Newall, SensorLab, Siemens, SIKO, Sony/Magnescale, Stegmann, Tamagawa, TEKEL, TIMKEN, TR Electronic, US Digital, Wachendorff
Can’t see your brand? Send us the encoder model and a clear nameplate photograph so we can check. Independent service provider. Brand names identify equipment we support and do not imply manufacturer authorisation or affiliation.
Servo Motor Repair-Inspection-Health Check-Alignment FAQs
Answers to common questions about encoder checks, alignment, repairs and sending equipment to our Ajman workshop.
What does the Servo motor Encoder Alignment service offer ?
Servo motors are Used on Automated machines controlled by CNC, PLC. To function properly, permanent magnet brushless motors depend on position feedback devices such as Hall Effect transducers, resolvers, incremental encoders, and serial encoders which require precise alignment. We have invested in Purchase & Licensing of Mitchell Electronics, Inc. products to meet the maintenance challenges presented by these modern motors and feedback devices. We can assure First Time Fix & Factory Quality Alignment using such world renowned equipment
Why did you Trust Mitchell Electronics as Supplier for Feedback alignment system ?
"Ajman Factories" established our base in UAE way back in 2003, We already use encoder diagnostic equipment from Heidenhain, Sick and Baumer, and Calibration equipment from Renishaw. When in came to choosing our Partners in Servo Motor Encoder Alignment Equipment, in order to Compliment what equipment we already had, We chose Mitchell Electronics. We could not have settled for any less than Mitchell, Given their Proven track record in support and DNA of Innovation built, They are the World leaders in Servo motor repair/ alignment equipment. Learn more about them at https://www.mitchell-electronics.com/about-us/|| How can you support our Target of 100% Uptime of our Machinery ? We can ensure 100% uptime for your Servo systems using the Predictive Maintenace progam developed by our Company. We can ensure Same Day Repair of Most Servo motors. Contact us with your Machine, motor details and we talk.
We want to Ensure same day repair for our Servo motor. How can it be made Possible?
We can ensure Same Day Repair of Most Servo motors. We have pro Active Maintenace program for servo motors specifically targeted to achieve your uptime, and machine effectivenss objectives. Contact us with your Machine, motor details and we talk.
Not sure if the problem is Motor ? Or Drive ? Or Encoder or Evaluation electronics Can you Help??
Yes our Engineer visits you with Mitchell Electronics TI-5000JX & TI-3000JX Test Equipment. We can check operation of Feedback system at Site & identify signal errors if there is any. Once you know the encoder Feedback is in Working order you can concentrate on other issues.
I have a Heavy motor Removing and Shipping Costs time/ Money. can you Replace encoder | Align encoder at Site. ??
Yes our Engineer visits you with Mitchell Electronics TI-5000JX & TI-3000JX Test Equipment. We shall Record the alignment of Old encoder and install new encoder in its place. You can provide the encoder or you can Order the encoder from us prior to the visit.
Do you have Ready Stock Encoders/ motorfeedbacks in stock?
We stock incremental Rotary encoders, absolute encoders and Resolvers of different types e.g. Quadature, SSI, Endat, Hiperface, Profibus etc..
What types of CNC Machines Spares do you stock?
We stock Linear scales, rotary encoders, servo drive cards, cables, connectors, pneumatic parts, Hydraulic actuators, servo motors, drives, fuse, fans and Sensors for ATC and turret encoders ...etc.
Can you repair encoder connectors and cables?
We offer encoder connector repair or replacement and encoder cable repair, subject to inspection and the availability of suitable parts. Please include photographs of any visible damage when sending your enquiry.
Do you offer PPR programming or encoder memory backup?
PPR programming, memory backup, copying and restoration are available for compatible encoder models. Send us the exact model details and your requirements so we can confirm whether these services are supported.
Where are you located?
Ajman Factories Equipment is located in Ajman, United Arab Emirates. Contact us before visiting or sending equipment so we can provide the workshop location and receiving instructions.
When was Ajman Factories Equipment established?
Ajman Factories Equipment was established in 2003.
How do I ship a faulty Servo Motor for reconditioning to you?
Send us a service request with the Servo motor make, model, fault description and your contact details. We will send you a Material Shipping Note with the delivery instructions. Include a copy of the note with your shipment so we can identify your encoder on arrival.
What information should I include in my service request?
Please include the make and model, clear nameplate and connector photographs, a description of the fault, and the machine or motor on which it is installed. Let us know whether you require workshop testing or an on-site visit.
