Site visit or send-in evaluation
Share the complete HEIDENHAIN ID and ML, installed reader or converter model, machine and axis, alarm and where it occurs along the travel. Include photos of the end blocks, connector, label and any mounting spar. Use the enquiry form to share the details.
What specialist testing can show
Use a compatible current-signal receiver or the manufacturer's specified test interface and loading. Compare the two scanning signals and reference track at the scale and control side. A qualified specialist can check if a dropout repeats at a physical position and whether the receiver decodes the C reference pattern. Exact Mitchell TI-5000JX and TI-3000JX support for this linear scale was not verified. HEIDENHAIN electrical data and follow-up electronics (PDF copy)
HEIDENHAIN LS 403 C Current-Output Linear Encoder technical reference
Find your part number
Record the full LS 403 C name, the ID and the measuring length (ML) printed on the label. ML is the usable measuring length, distinct from overall scale length. C specifies distance-coded reference marks. The following exact ID examples come from supplier catalogue records and the fitting and signal descriptions come from HEIDENHAIN's original manual.
| Nameplate / ID | Measuring length and reference | Termination |
|---|---|---|
| LS 403 C · 233191-22 | ML 470 mm, distance-coded | 02S09 male 9-pin factory connector, 3 m |
| LS 403 C · 233191-50 | ML 670 mm, distance-coded | 34S09 male 9-pin flange socket on mounting block, 0.3 m |
| LS 403 (without C) | Fixed reference mark arrangement. Check the exact length and edition drawing. | Other terminations exist. Read the actual connector and ID. |
Supplier record for 233191-22 · Supplier record for 233191-50 · HEIDENHAIN reference-mark distinction (PDF copy)
Production and end-of-life status
This is an installed-base legacy scale. The original HEIDENHAIN mounting manual and older machine manuals document it. Check current factory repair, successor and stock by exact ID. The modern LS 400 family's name alone is insufficient for replacement. Original HEIDENHAIN mounting documentation (PDF copy) · HEIDENHAIN interface converters
Specifications
| Parameter | Value / applicability |
|---|---|
| Measurement | Sealed optical incremental scale, 20 µm glass graduation period. Distance-coded reference marks for the C type. |
| Supply | 5 V ±5% and 120 mA in the full mounting manual for its described lamp-based assembly. Verify the unit's edition and installed documentation before testing. |
| Output | Sinusoidal current class 11 µApp. The cited full manual gives 7–16 µApp per incremental track at its specified 1 kΩ load, and 2–8 µA useful reference component. |
| Travel speed | Up to 48 m/min in the HEIDENHAIN manual, subject to the downstream electronics and actual installation. |
| Protection | IP53 when fitted per instructions. The full manual specifies IP64 with the documented air purge. |
| Measurement length and connection | Read ML and the termination from the label. The two ID examples differ in both. |
HEIDENHAIN electrical and mechanical data (PDF copy) · HEIDENHAIN installation and reference data (PDF copy)
Mounting and fit
The sealed scale mounts to one machine member and the scanning head moves with the other. Align the mounting faces to the guideway and verify the head-to-scale relationship over the full travel. Use the mounting form and dimensions for the actual end blocks or spar. The original full manual recommends the spar for measuring lengths above 620 mm and for certain higher-vibration installations. Check the manual for its prescribed transport brace removal, seal orientation and clearances before moving the axis. HEIDENHAIN mounting faces, spar and alignment (PDF copy) · Mounting sketches and measuring length (PDF copy)
Interface and measuring method
The optical head generates two sinusoidal current signals and a separate reference signal. A compatible receiver converts the currents and interpolates position between 20 µm periods. A control using distance-coded marks can recover the machine reference after crossing the required sequence. A smooth movement reading with a reference alarm points toward the reference path or the control setting. Check the current-input receiver or EXE/VRZ/TNC path before substituting a scale or converter. HEIDENHAIN measurement and follow-up electronics (PDF copy) · HEIDENHAIN 11 µApp interface conversion
Verified wiring
For the 9-contact HEIDENHAIN arrangement in the full mounting manual's electrical connection diagram, match the contact numbers on the fitted connector. Use the two contacts within each signal pair as shown in the drawing. Verify this against the machine-side connection, especially on an adapted scale.
| Contacts | HEIDENHAIN manual function |
|---|---|
| 3 / 4 | 5 V lamp supply / 0 V return |
| 1 and 2 | First incremental current pair (0° electrical) |
| 5 and 6 | Second incremental current pair (90° electrical) |
| 7 and 8 | Reference current pair |
| 9 / connector shell | Inner shield / outer shield to housing and mounting block, respectively, in the cited drawing |
Use the exact diagram for pair polarity and shield termination. A current output requires the specified receiving circuit. HEIDENHAIN electrical connection and shield layout, printed p. 34 (PDF copy)
Cables inside the motor and at the machine
This is a machine-axis scale with a head lead. The original HEIDENHAIN cable table lists 246662-xx standard and 235807-xx armoured extensions for the regular/armoured connector-ended scale lead, and 246660-xx or 235804-xx for the flange-socket arrangement. Confirm the length suffix and connector before ordering. The manual gives total cable limits of 30 m standard or 20 m armoured for the specified setup. Check the installed electronics for any tighter limit. HEIDENHAIN extension cable table and limits, printed p. 35 (PDF copy)
Fault checks
Isolate and secure the axis, including gravity or counterbalance energy, before touching the scale. Follow your site’s lockout procedure. Secure the load against movement, isolate all motor, drive and separate feedback supplies, allow the specified discharge time and verify absence of voltage. A qualified technician should perform internal and electrical checks. Unplug or reconnect only with the applicable circuits safely de-energized.
- Record. Note the position and direction when the reading drops out or the reference search fails. Photograph the seal condition, mounting end blocks, cable loop and any converter.
- Inspect. Check the head fasteners, mounting and parallelism, deformed lips, evidence of coolant ingress, crushed cable and connector seating. Follow the HEIDENHAIN method for protective measures and cleaning.
- Check the detached extension. With the harness isolated from the encoder and receiver at both ends, use resistance mode. First short the meter probes to establish lead resistance. Check each conductor end to end and flex the cable gently at the strain relief. Check between unrelated wires and from signal wires to shield or shell. Expect open only where the drawing calls for isolation. Compare any intentional sense links or shield bonds with the equipment drawing. Keep insulation testers away from connected electronics. Preserve individual signal pairs and the inner and outer shield layout.
- Compare supply and readout. A qualified technician can check the specified lamp supply at the approved breakout while the machine is in the authorized test state. A healthy supply alone leaves the head signals untested. Check current-signal quality and reference with a compatible tester, then compare at the control. A dropout at the same travel point suggests scale geometry or contamination. A signal lost only at the receiver points toward cabling or input.
Motor and drive applications
HEIDENHAIN documents the original scale for compatible VRZ displays, TNC controls and EXE interpolating electronics. The Kunzmann machine manual illustrates a historical TNC application. Verify the installed interface, reference mode and axis travel before replacing an original. HEIDENHAIN downstream electronics (PDF copy) · Kunzmann WF5 / TNC 155 machine documentation (PDF)
Angle of alignment and commissioning
For a linear axis, alignment means parallel fit across travel and a verified machine reference. Record the original orientation, head position, measuring length and CNC reference mode before removal. After fitting and checking clearance through the approved travel, follow the machine's C-scale referencing procedure and verify a known displacement. This linear scale has no servo commutation offset of its own. HEIDENHAIN measuring length and reference drawings (PDF copy)
Drawings, pin maps and manuals
- HEIDENHAIN LS 403 / LS 403 C full mounting instructions (PDF copy). Manufacturer manual with mounting, technical data, contact diagram and cable families.
- HEIDENHAIN mounting instruction 226 557 03 (PDF copy). Illustrated mechanical installation and C reference marks.
- Kunzmann WF5 TNC 155 machine instructions (PDF). Check the installed OEM axis configuration and wiring.
- HEIDENHAIN converter overview. Match the current-input class and the receiver before retrofitting.