What specialist testing can show
TI-5000JX bench. TI-5000JX on the isolated internal resolver with TI-5928 and the documented setup. The proprietary four-wire SFD data remains a separate diagnostic path.
TI-3000JX motor run. The exact linked case establishes direct resolver checks and alignment. Confirm the motor, fixture and approved run setup with a specialist before any powered rotation.
Starting lead. TI-5928 at the documented internal resolver connector. Module Resolver input via the verified TI-5928 fixture.
Kollmorgen AKM21E-BNM2C-00 Legacy SFD Internal Resolver technical reference
Find your part number
Compare the fitted feedback label, complete motor order and connector. A motor order and an encoder MPN identify different items.
| ID or order | How to identify it |
|---|---|
| AKM21E-BNM2C-00 | Exact legacy SFD motor in Mitchell’s linked case. Verify the full label and converter assembly before opening the feedback end. |
| Internal 8-contact resolver plug | Mitchell identifies this as the TI-5928 diagnostic connection. |
| External four-wire SFD connection | The fitted converter produces a proprietary serial output. Mitchell documents the direct resolver path separately. |
Production and end-of-life status
Confirm orderability and any replacement with the manufacturer against the full fitted ID. The linked documents identify the documented setup.
Specifications
| Parameter | Verified scope |
|---|---|
| Fitted feedback architecture | Passive resolver feeds a converter PCB in the legacy SFD assembly. |
| Direct connection | Internal 8-contact resolver connection and the TI-5928 drawing. |
| Drive-side output | Legacy four-wire SFD serial. The direct resolver test assesses a different circuit. |
Interface and measuring method
AC excitation and the resolver’s sine and cosine returns are processed by the SFD board. A good resolver trace can coexist with an SFD drive alarm. Continue with the converter, external harness and drive receiver if the internal path checks out.
Mounting and fit
Use the exact AKM motor case and feedback assembly drawing. Record the original resolver relationship and cable dressing before a bearing change. Support the motor and avoid loading the connector or the converter PCB during service.
Wiring and connector scope
Use the TI-5928 drawing for the internal resolver plug. Use the Kollmorgen wiring for the external SFD connector. Trace the excitation and return windings as separate circuits on the approved fixture.
Internal motor and machine cables
The internal resolver-to-PCB link and the external motor-to-drive feedback cable carry different signals. Record both plug views and the external cable assembly. The TI-5928 part number identifies the Mitchell diagnostic lead.
Fault checks
Use the site’s isolation procedure before opening a connector or checking resistance. Secure the load against motion, lock out relevant energy sources, wait the specified discharge time and have a qualified technician verify isolation. Follow the OEM procedure for any retention battery.
What can I check on the machine?
Disconnect the harness at both ends. Check end-to-end continuity against the exact drawing, then check for unintended shorts between conductors and to the shell or shield. Compare against the documented shield bonds. Inspect pins, keying, debris, moisture and latch engagement. Check clamps or fasteners only where accessible under the approved procedure.
A resolver is passive. Check isolated winding continuity against the matching drawing. Use the specified AC excitation on the approved test fixture for a signal check.
| Symptom | What to verify |
|---|---|
| SFD alarms with stable internal resolver returns | Check the converter, external cable and drive receiver with the correct SFD documentation. |
| Both resolver returns weak | Verify excitation and the internal harness first. Check the isolated winding circuit against the case drawing. |
| Fault started after a bearing change | Review resolver seating, cable routing and the incoming alignment record. |
Angle of alignment and commissioning
Keep the incoming reference and compare it with the AKM21E-BNM2C-00 case. Record polarity, direction and the actual resolver setting before disturbing the assembly. A specialist can verify alignment on the documented direct-resolver setup.
Motor and drive applications
Kollmorgen AKM legacy SFD
Isolate a resolver or alignment problem from a possible SFD converter fault.
Related SpareFaber guides
Drawings, pin maps and manuals
- Kollmorgen AKM motors with SFD feedback. Linked AKM21E-BNM2C-00 example and 8-contact resolver connection
- Mitchell AKM21E-BNM2C-00 SFD motor case. Supplementary reference for the stated model or setup.
- Mitchell TI-5928 resolver test cable drawing. Use the documented internal plug and pin view for the AKM SFD resolver.
- Mitchell AKM support. AKM option and resolver-path scope, including legacy SFD and SFD3.
Questions
Can I use a similar label as a replacement?
Compare the interface, mechanical fit, connector, data or commutation requirements and OEM option before choosing a substitute. The ID table gives the useful distinctions for this guide.
What information helps with a diagnosis?
Send the encoder and motor labels, drive model, alarm history and both connector views. Say whether the problem began after cable work, encoder replacement or a drive change. We can confirm visit scope or send-in evaluation and timing from those details.
Site visit or send-in evaluation
Send the encoder and motor labels, drive model, alarm history and both connector views. Say whether the problem began after cable work, encoder replacement or a drive change. We can confirm visit scope or send-in evaluation and timing from those details.