What specialist testing can show
TI-5000JX bench. Check the incremental and commutation circuits separately with the matched fixture.
TI-3000JX motor run. Confirm the motor order, phase convention and supported run setup.
Starting lead. TI-5644 on the documented 19-contact bayonet arrangement.
Lafert B3081 / Eltra EF80 Incremental ABZ/UVW Encoder technical reference
Find your part number
Compare the fitted feedback label, complete motor order and connector. A motor order and an encoder MPN identify different items.
| ID or order | How to identify it |
|---|---|
| Lafert B3081 / EF80 | Mitchell lists TI-5644 for this ABZ/UVW motor connection. |
| EF80C | Blind hollow shaft in the Eltra order key. |
| EF80P | Through hollow shaft in the order key. |
| Other EF80 order characters | Match motor pole count, commutation output, incremental resolution and index option. |
Production and end-of-life status
Confirm orderability and any replacement with the manufacturer against the full fitted ID. The linked documents identify the documented setup.
Specifications
| Parameter | Verified scope |
|---|---|
| Family resolution | Eltra lists 200–2,048 pulses per revolution by order, with optional index. |
| Commutation | 4-, 6- or 8-pole motor options in the EF80 order key. |
| Electrical options | Check separate incremental and commutation output codes. The commutation choices include NPN open collector and RS-422. |
Interface and measuring method
The incremental tracks report motion and direction. The commutation tracks identify rotor sectors, and some EF80 orders have no index. Verify the fitted order before treating a missing Z signal as a fault.
Mounting and fit
Measure the shaft and check whether it stops in a blind bore or passes through the encoder. Inspect the OEM locating and restraint parts. Match the order drawing and preserve the rotor and stator reference marks.
Wiring and connector scope
Use the Eltra electrical order for the encoder circuit and the Lafert schematic for the 19-contact motor plug. Match differential returns or open-collector circuits to the proper input before connecting.
Internal motor and machine cables
TI-5644 is the tester lead for the documented motor connection. The factory EF80 pigtail and machine extension have separate drawings and should be logged separately.
Fault checks
Use the site’s isolation procedure before opening a connector or checking resistance. Secure the load against motion, lock out relevant energy sources, wait the specified discharge time and have a qualified technician verify isolation. Follow the OEM procedure for any retention battery.
What can I check on the machine?
Disconnect the harness at both ends. Check end-to-end continuity against the exact drawing, then check for unintended shorts between conductors and to the shell or shield. Compare against the documented shield bonds. Inspect pins, keying, debris, moisture and latch engagement. Check clamps or fasteners only where accessible under the approved procedure.
Use only the OEM-approved powered check and a suitable breakout. A qualified technician can compare the voltage across the specified supply and return with the model’s limits under the stated test conditions. A multimeter can check supply health. Signal integrity and communications require the appropriate signal test.
| Symptom | What to verify |
|---|---|
| A/B counts with no index | Check the EF80 index order character and the expected drive function. |
| Enable fault with position present | Compare commutation output type, phase sequence and motor poles. |
| Dropouts after rear cover work | Check the pigtail bend, shaft seating and connector pin retention. |
Angle of alignment and commissioning
Record the original motor phase relationship and commutation transitions before specialist replacement. Pole count, sensor output order and direction all need to match the actual motor.
Motor and drive applications
Lafert B3081 with the documented EF80 and 19-contact bayonet
Match the full EF80 order, bore and commutation to the Lafert motor before replacing the encoder.
Drawings, pin maps and manuals
- Mitchell Test Cable Index by Manufacturer. Lafert section, TI-5644 B3081 / Eltra EF80 ABZ/UVW
- Eltra EF 80 C/P drawing and electrical data. Supplementary reference for the stated model or setup.
Questions
Can I use a similar label as a replacement?
Compare the interface, mechanical fit, connector, data or commutation requirements and OEM option before choosing a substitute. The ID table gives the useful distinctions for this guide.
What information helps with a diagnosis?
Send the encoder and motor labels, drive model, alarm history and both connector views. Say whether the problem began after cable work, encoder replacement or a drive change. We can confirm visit scope or send-in evaluation and timing from those details.
Site visit or send-in evaluation
Send the encoder and motor labels, drive model, alarm history and both connector views. Say whether the problem began after cable work, encoder replacement or a drive change. We can confirm visit scope or send-in evaluation and timing from those details.