What specialist testing can show
TI-5000JX bench. On the documented connection, check movement, index where fitted and commutation separately.
TI-3000JX motor run. Confirm the full motor order, power lead, phase reference and supported TI-3000JX setup.
Starting lead. TI-5727 on the documented 17-contact M23.
Lenze MCS Incremental ABZ/UVW Servo Feedback technical reference
Find your part number
Compare the fitted feedback label, complete motor order and connector. A motor order and an encoder MPN identify different items.
| ID or order | How to identify it |
|---|---|
| MCS incremental ABZ/UVW | Scope of TI-5727. Check the fitted interface and connector drawing. |
| MCS resolver / absolute / OCT | Separate options listed by Lenze. Confirm the full order and drive input before connecting. |
| Lenze MDFK | Different feedback assembly and documented connector. |
Production and end-of-life status
Confirm orderability and any replacement with the manufacturer against the full fitted ID. The linked documents identify the documented setup.
Specifications
| Parameter | Verified scope |
|---|---|
| Incremental signals | A, B and reference Z on the documented branch. |
| Commutation | Separate UVW signals on that connection. |
| Motor mounting | Lenze lists a B5 version. Use the fitted motor drawing for mechanical details. |
Interface and measuring method
Position counts and commutation states are independent checks. A drive can track motion and still report a commutation fault when the original phase relation or an input is missing.
Mounting and fit
Use the exact frame and rear feedback drawing. Record the position of the sensing element, fastening and loom before changing the assembly.
Wiring and connector scope
Match the 17-contact M23 view and output type. Confirm the actual supply and signal returns with the fitted motor and drive diagrams.
Internal motor and machine cables
Trace the motor pigtail and machine extension separately. Record cable shield termination and contact retention, particularly when the fault follows motor movement.
Fault checks
Use the site’s isolation procedure before opening a connector or checking resistance. Secure the load against motion, lock out relevant energy sources, wait the specified discharge time and have a qualified technician verify isolation. Follow the OEM procedure for any retention battery.
What can I check on the machine?
Disconnect the harness at both ends. Check end-to-end continuity against the exact drawing, then check for unintended shorts between conductors and to the shell or shield. Compare against the documented shield bonds. Inspect pins, keying, debris, moisture and latch engagement. Check clamps or fasteners only where accessible under the approved procedure.
Use only the OEM-approved powered check and a suitable breakout. A qualified technician can compare the voltage across the specified supply and return with the model’s limits under the stated test conditions. A multimeter can check supply health. Signal integrity and communications require the appropriate signal test.
| Symptom | What to verify |
|---|---|
| Movement counts present, drive fails at enable | Check UVW transitions and phase reference. |
| Machine homes inconsistently | Check the fitted Z path and the axis configuration. |
| Fault when cable flexes | Inspect the M23 lock and isolated harness. |
Angle of alignment and commissioning
Capture direction, index and commutation phase relation. Use the Lenze motor and drive commissioning procedure for the fitted configuration.
Motor and drive applications
Lenze MCS with 17-contact M23 incremental connection
Distinguish this incremental option from other MCS feedback builds before checking the motor loom.
Drawings, pin maps and manuals
- Mitchell Test Cable Index by Manufacturer Support. Lenze Support Part Numbers, TI-5727
- Lenze MCS synchronous servo motors and technical downloads. Supplementary reference for the stated model or setup.
Questions
Can I use a similar label as a replacement?
Compare the interface, mechanical fit, connector, data or commutation requirements and OEM option before choosing a substitute. The ID table gives the useful distinctions for this guide.
What information helps with a diagnosis?
Send the encoder and motor labels, drive model, alarm history and both connector views. Say whether the problem began after cable work, encoder replacement or a drive change. We can confirm visit scope or send-in evaluation and timing from those details.
Site visit or send-in evaluation
Send the encoder and motor labels, drive model, alarm history and both connector views. Say whether the problem began after cable work, encoder replacement or a drive change. We can confirm visit scope or send-in evaluation and timing from those details.