What specialist testing can show
TI-5000JX bench. Mitchell lists TI-5633 for the documented incremental branch. Confirm the fitted circuit and cable before the TI-5000JX incremental check.
TI-3000JX motor run. Match the motor, encoder, amplifier and commutation procedure before any run test.
Starting lead. TI-5633 for the documented FAE N incremental connector arrangement.
MOOG Fastact FAE N Incremental Servo Motor Feedback technical reference
Find your part number
Compare the fitted feedback label, complete motor order and connector. A motor order and an encoder MPN identify different items.
| ID or order | How to identify it |
|---|---|
| Fastact FAE N | Incremental feedback branch designed for the DS200 drive family in Mitchell’s description. Verify the exact motor configuration. |
| Fastact FAS N | Resolver branch with several connector options, including the same PT00E 14-19 PC10 shell. |
| PT00E 14-19 PC10 | Use the incremental drawing for FAE N and the resolver drawing for FAS N. The connector designation alone does not identify the wiring. |
Production and end-of-life status
Confirm orderability and any replacement with the manufacturer against the full fitted ID. The linked documents identify the documented setup.
Specifications
| Parameter | Verified scope |
|---|---|
| Feedback | Incremental encoder in the documented FAE N application. |
| Connection | 19-contact PT00E 14-19 PC10 for the illustrated FAE N setup. |
| Test fixture | Mitchell lists TI-5633 for compatible incremental encoders on this branch. |
Interface and measuring method
The receiver derives relative movement and direction from pulse transitions. Check the installed channel and reference arrangement in the MOOG drawing. A resolver receiver would expect excitation and return signals on its version of the connection.
Mounting and fit
Use the MOOG Fastact N frame outline and the fitted rear assembly drawing. Inspect encoder seat, shaft engagement and cable strain relief before disassembly. Verify how the body is held against rotation.
Wiring and connector scope
Use the FAE N connector drawing in the MOOG technical document or Mitchell Fastact N section. Identify channel, supply, return and shield functions from the indicated connector view. Keep the FAS N resolver drawing separate.
Internal motor and machine cables
TI-5633 is a diagnostic lead. Source the actual DS200 machine cable and internal harness using the motor and drive orders. Use the exact wiring view and shield details before rebuilding a cable.
Fault checks
Use the site’s isolation procedure before opening a connector or checking resistance. Secure the load against motion, lock out relevant energy sources, wait the specified discharge time and have a qualified technician verify isolation. Follow the OEM procedure for any retention battery.
What can I check on the machine?
Disconnect the harness at both ends. Check end-to-end continuity against the exact drawing, then check for unintended shorts between conductors and to the shell or shield. Compare against the documented shield bonds. Inspect pins, keying, debris, moisture and latch engagement. Check clamps or fasteners only where accessible under the approved procedure.
Use only the OEM-approved powered check and a suitable breakout. A qualified technician can compare the voltage across the specified supply and return with the model’s limits under the stated test conditions. A multimeter can check supply health. Signal integrity and communications require the appropriate signal test.
| Symptom | What to verify |
|---|---|
| No counts after connecting a matching-looking lead | Verify FAE N versus FAS N and check the wire assignments on the correct version. |
| Count drops on long travel | Compare the installed harness with the short test path. Inspect strain relief and check the isolated channels and shield. |
| Motion count is wrong after work | Verify decoder settings, actual encoder resolution and mounting engagement. |
Angle of alignment and commissioning
Retain the original drive and motor references. After a qualified installation, check direction, reference and any required commutation setup using the FAE N and drive instructions.
Motor and drive applications
MOOG Fastact FAE N for DS200 drive family
Read the complete Fastact motor order and encoder ID to confirm resolution, pin view and machine cable.
Related SpareFaber guides
Drawings, pin maps and manuals
- MOOG Motors. Fastact N, FAE N wiring and TI-5633
- MOOG Fastact N motor technical catalogue. FAE N and FAS N technical data, motor dimensions and connector diagrams.
Questions
Can I use a similar label as a replacement?
Compare the interface, mechanical fit, connector, data or commutation requirements and OEM option before choosing a substitute. The ID table gives the useful distinctions for this guide.
What information helps with a diagnosis?
Send the encoder and motor labels, drive model, alarm history and both connector views. Say whether the problem began after cable work, encoder replacement or a drive change. We can confirm visit scope or send-in evaluation and timing from those details.
Site visit or send-in evaluation
Send the encoder and motor labels, drive model, alarm history and both connector views. Say whether the problem began after cable work, encoder replacement or a drive change. We can confirm visit scope or send-in evaluation and timing from those details.