What specialist testing can show
TI-5000JX bench. Read position on the qualified BiSS configuration. Confirm the fitted protocol and frame format before connecting.
TI-3000JX motor run. Confirm the actual motor and supported run path separately.
Starting lead. Use the documented AC58 connector, voltage option and compatible BiSS breakout.
Hengstler AC58 BiSS Absolute Rotary Encoder technical reference
Find your part number
Compare the fitted feedback label, complete motor order and connector. A motor order and an encoder MPN identify different items.
| ID or order | How to identify it |
|---|---|
| AC58 BiSS-B | Use the manufacturer order and exact position/register protocol setting. |
| AC58 BiSS-C | Use the specified continuous-mode frame and configured position and turn widths. |
| AC58 SSI / Parallel | Separate interfaces in the same housing family. Match wiring and control selection by order. |
Production and end-of-life status
Hengstler lists the AC58 family and provides documentation. Confirm availability for the complete BiSS order.
Specifications
| Parameter | Verified scope |
|---|---|
| Position range | Mitchell’s family table lists up to 17 singleturn bits and 12 multiturn bits. Read the fitted order for actual widths. |
| Supply variants | The shared OEM datasheet specifies 5 V or 10–30 V options by order. |
| Connections | The datasheet distinguishes 12-contact M23/cable and 8-contact M12 branches, with separate connection tables for applicable sine/cosine versions. |
Interface and measuring method
The controller clocks a differential serial frame and checks the bits expected for that profile. BiSS-B has separate position and register modes. BiSS-C carries control information across successive frames. Match status and check bits where the controller supports them.
Mounting and fit
Use the exact shaft and flange drawing, including pilot fit and coupling or torque restraint. Photograph the shaft and connector code before ordering a replacement. A different shaft can share the same outer case.
Wiring and connector scope
Select the BiSS row and the exact connector view in the OEM datasheet. Identify clock and data pairs and their polarity, supply, direction input and any analog pairs. Check the M23 contact arrangement before matching a cable by pin count.
Internal motor and machine cables
Use the datasheet accessory table to identify the mating plug after decoding the connection code. Trace the twisted pairs from the drive to the motor or axis connection. Record any OEM adapter harness separately.
Fault checks
Use the site’s isolation procedure before opening a connector or checking resistance. Secure the load against motion, lock out relevant energy sources, wait the specified discharge time and have a qualified technician verify isolation. Follow the OEM procedure for any retention battery.
What can I check on the machine?
Disconnect the harness at both ends. Check end-to-end continuity against the exact drawing, then check for unintended shorts between conductors and to the shell or shield. Compare against the documented shield bonds. Inspect pins, keying, debris, moisture and latch engagement. Check clamps or fasteners only where accessible under the approved procedure.
Use only the OEM-approved powered check and a suitable breakout. A qualified technician can compare the voltage across the specified supply and return with the model’s limits under the stated test conditions. A multimeter can check supply health. Signal integrity and communications require the appropriate signal test.
| Symptom | What to verify |
|---|---|
| No data with valid supply | Confirm the BiSS mode, differential clock polarity and correct mating view. |
| Position values jump at a fixed count | Compare turn and position widths and frame interpretation with the exact order. |
| Fault only when moving the cable | Isolate-test the clock and data pairs, shield continuity and connector strain relief. |
Angle of alignment and commissioning
Save the machine datum and direction setting. After replacement, verify the position frame and travel scale at known points before setting a new reference.
Motor and drive applications
AC58 BiSS industrial rotary application
Identify BiSS-B or BiSS-C and the shaft and connector order before replacing an AC58.
Related SpareFaber guides
Drawings, pin maps and manuals
- Hengstler Encoders. Absolute Encoders table, AC58 with BiSS / SSI
- Hengstler AC58 SSI / BiSS technical data. Supplementary reference for the stated model or setup.
- BiSS Serial Protocol. Reference for the fitted feedback or motor option.
- Hengstler AC58 family and document downloads. The SSI/BiSS datasheet includes order keys, mechanical drawings, and connection variants.
Questions
Can I use a similar label as a replacement?
Compare the interface, mechanical fit, connector, data or commutation requirements and OEM option before choosing a substitute. The ID table gives the useful distinctions for this guide.
What information helps with a diagnosis?
Send the encoder and motor labels, drive model, alarm history and both connector views. Say whether the problem began after cable work, encoder replacement or a drive change. We can confirm visit scope or send-in evaluation and timing from those details.
Site visit or send-in evaluation
Send the encoder and motor labels, drive model, alarm history and both connector views. Say whether the problem began after cable work, encoder replacement or a drive change. We can confirm visit scope or send-in evaluation and timing from those details.