What specialist testing can show
TI-5000JX bench. Assess incremental and tachometer circuits independently. Match the full TFUE suffix.
TI-3000JX motor run. Confirm the motor and drive arrangement before assigning a supported run setup.
Starting lead. TI-5634 on the documented 17-contact MS branch.
Yaskawa TFUE Incremental ABZ and Tachometer Feedback technical reference
Find your part number
Compare the fitted feedback label, complete motor order and connector. A motor order and an encoder MPN identify different items.
| ID or order | How to identify it |
|---|---|
| TFUE with 17-contact MS | Mitchell’s TI-5634 connection for ABZ and tachometer. |
| TFUE suffix | Use the suffix and machine drawing to confirm encoder output, line count and tachometer rating. |
| Yaskawa UTOPI or Sigma serial | Different feedback channels and test profiles. Compare the full label before using an adapter. |
Production and end-of-life status
Confirm orderability and any replacement with the manufacturer against the full fitted ID. The linked documents identify the documented setup.
Specifications
| Parameter | Verified scope |
|---|---|
| Position channels | A, B and Z on the documented TFUE connection. |
| Speed channel | Separate tachometer circuit. Identify fitted output and scaling from the motor documentation. |
| Starting lead | TI-5634, 17-contact MS, for the stated branch. |
Interface and measuring method
A and B indicate incremental position and direction. Z is a reference event. The tachometer measures speed on a separate circuit, so a healthy index does not verify the tachometer.
Mounting and fit
Obtain the fitted Yaskawa rear assembly drawing. Record the shaft reference, mounting and tachometer relationship before dismantling. Check the accessible mount and connector first.
Wiring and connector scope
Verify the 17-contact mating view and the original machine schematic. Trace the ABZ and tachometer paths separately. Obtain the fitted supply and tach ratings before a powered check.
Internal motor and machine cables
Record the motor-side and drive-side connection and any cable adapter. TI-5634 identifies the test lead. Keep the OEM production and internal leads separate.
Fault checks
Use the site’s isolation procedure before opening a connector or checking resistance. Secure the load against motion, lock out relevant energy sources, wait the specified discharge time and have a qualified technician verify isolation. Follow the OEM procedure for any retention battery.
What can I check on the machine?
Disconnect the harness at both ends. Check end-to-end continuity against the exact drawing, then check for unintended shorts between conductors and to the shell or shield. Compare against the documented shield bonds. Inspect pins, keying, debris, moisture and latch engagement. Check clamps or fasteners only where accessible under the approved procedure.
Use only the OEM-approved powered check and a suitable breakout. A qualified technician can compare the voltage across the specified supply and return with the model’s limits under the stated test conditions. A multimeter can check supply health. Signal integrity and communications require the appropriate signal test.
| Symptom | What to verify |
|---|---|
| Drive speed alarm while counts change | Check the tachometer path and drive scaling separately. |
| Motion counts reverse after cable repair | Verify A/B phase and connector view. |
| Tach signal and counts drop together | Inspect plug engagement and the isolated harness for movement-related faults. |
Angle of alignment and commissioning
Preserve count direction, index position and tachometer polarity. Verify the machine reference and speed feedback under the documented setup after refitting.
Motor and drive applications
Legacy Yaskawa motor with documented TFUE 17-contact connection
Separate lost position counts from missing tachometer speed feedback and match the unit’s exact order.
Related SpareFaber guides
Drawings, pin maps and manuals
- Mitchell Test Cable Index by Manufacturer. Yaskawa section, TI-5634 TFUE ABZ/Tach 17-contact MS
- Yaskawa Minertia Motor R series, TFUE feedback unit tables. Supplementary reference for the stated model or setup.
Questions
Can I use a similar label as a replacement?
Compare the interface, mechanical fit, connector, data or commutation requirements and OEM option before choosing a substitute. The ID table gives the useful distinctions for this guide.
What information helps with a diagnosis?
Send the encoder and motor labels, drive model, alarm history and both connector views. Say whether the problem began after cable work, encoder replacement or a drive change. We can confirm visit scope or send-in evaluation and timing from those details.
Site visit or send-in evaluation
Send the encoder and motor labels, drive model, alarm history and both connector views. Say whether the problem began after cable work, encoder replacement or a drive change. We can confirm visit scope or send-in evaluation and timing from those details.