HEIDENHAIN ECN 125 2048 EnDat22 Encoder Repair/Testing Diagnosis, Alignment, Memory Report, Programming
- Established in 2003, Ajman Factories is pioneers in Servo motor repairing in United Arab Emirates
- in 2006- First Importer of Mitchell system in United Arab Emirates.
- Servo motor repairs using Mitchell Electronics, Inc. (MEI) TI-5000JX & Run Test Equipment TI-3000JX system
- Supporting Maintenance teams | Motor rewinders Repair Servo motors In house in UAE with Mitchell | Heidenhain | Sick | Baumer |Dynapar |Schneider Servo Repair Specialised Equipment ( Hire Equipment Time/ Engineering service)
Request Servo System Troubleshooting, Repair or Mainenance Service with Mitchell Electronic Inc. TI-5000JX Encoder Alignment and | TI-3000JX servo motor run test equipment
Experiencing Servo Motor Errors | Servo Motor Alarms | - Heidenhain- Sick - Hengstler Encoder Faults, other Machine Fault? Cable Broken- Need Repair/ Replacement? Tell us about your machine, describe the fault, and upload supporting screenshots or photographs. Our technical team will review your request for online assistance or a field visit.
Only upload documents and images you are authorised to share. Do not include passwords or confidential production information.
Submission is a request for assistance. An appointment is confirmed only after our team contacts you.
HEIDENHAIN ECN 125 2048 EnDat22 Absolute single Turn Encoder Testing, Repair and Alignment Service at your site in UAE.
We test Heidenhain Absolute Single Turn endat encoders ECN 125 2048, We Provide service at YOUR Site in UAE for repair or replace it and align it to the rotor of your Servo Motor
Servo motors Brands using this Encoder: • Direct-drive motors from Siemens (SIMOTICS T series like 1FW3 / 1FW6), Kollmorgen, and KESSLER direct-drive rotary tables and motor spindles. We have also found this on Custom hollow-shaft servo motors from manufacturers like Baumüller (DST2 series) and Parker Hannifin (hollow-shaft torque motors)
We Arrange visit of our Expert engineer with Mitchell Electronics, Inc. Servo Motor Testing & Encoder Encoder Testing, Diagnosis, Alignment, Memory Report, Programming Equipments :
- TI-5000JX is a servo motor feedback tester
- The TI-3000JX is a servo motor run test equipment
- We have different modules for interfacing different Encoders ( endat, hiperface,1vss,TTL, HTl, SSI) and cables specific to encoder / servo motor model etc.
- We have Ready made cables for hooking this encoder to our Servo motor testing system..
Our expert services and Equipment time include : Servo Motor Repair Products for Encoder alignment and servo motor run test
Encoder testing Products : for Encoder Testing, Diagnosis, Alignment, Memory Report, Programming
Encoder Testing | Servo repair Support in the Factory - At Your Site in UAE
Reduce downtime - lets help you plan for Same day Servo motor Repair. Lets help you move towards and achieve 100% Uptime of your Servo Setup.
Implement Quality Assurance - Know condition of your servo motor and ensure Quality Production
Condition Monitoring / Preventive maintenance - Know the Current Signal performance of Encoders and know if it about to fail and plan Next replacement.
Pro-Active Maintenance- Record Alignment of All your Servo motor encoders in Advance.
--------------------------------
Here are Details | Example uses | bit of Specification of
ECN 125 2048 EnDat22
The HEIDENHAIN ECN 125 is an optical absolute singleturn rotary encoder with integral bearings, a mounted stator coupling, and large hollow-through shaft configurations. Unlike compact servo encoders like the ECN 1313 series, the ECN 125 belongs to HEIDENHAIN's large-diameter hollow shaft family (ExN 100/125 series), specifically engineered for large direct-drive torque motors, hollow-shaft spindle motors, and heavy industrial machine axes.
1. Technical Specifications (ECN 125)
• Scanning Principle: Optical scanning with integral bearings.
• Singleturn Resolution: 33,554,432 positions per revolution (25-bit pure binary absolute).
• Line Count: 2048.
• Data Interface: HEIDENHAIN EnDat 2.2 (EnDat22 purely serial transmission).
• Hollow Shaft Diameters: Large hollow through-shafts with eccentric clamping ring in ∅20 mm, ∅25 mm, ∅38 mm, or ∅50 mm options.
• Stator Coupling: Stator coupling for plane surface (mounting hole circle ∅96 mm).
• System Accuracy: Down to ±20".
• Supply Voltage: DC 3.6 V to 14 V (earlier revisions rated DC 3.6 V to 5.25 V).
• Max Permissible Speed: 4,000 to 6,000 rpm depending on hollow shaft diameter.
• Operating Temperature: -40 °C to +100 °C (-10 °C to +100 °C depending on cable type).
• Protection Class: Up to IP64.2. Servo & Spindle Motor Applications
The ECN 125 is designed for applications where drive shafts, coolant pipes, or cables must pass directly through the encoder center.
• Direct Drive Torque Motors: Direct-drive motors from Siemens (SIMOTICS T series like 1FW3 / 1FW6), Kollmorgen, and KESSLER direct-drive rotary tables and motor spindles.
• Hollow Shaft Spindle Motors: Machine-tool main spindle drives requiring high-precision positioning (C-axis interpolation) with through-coolant or drawbar feedthrough.
• Large Industrial Synchronous Motors: Custom hollow-shaft servo motors from manufacturers like Baumüller (DST2 series) and Parker Hannifin (hollow-shaft torque motors).3. Complete Part Numbers & Verified Id.Nr. (HEIDENHAIN)
The ID numbers of the ECN 125 family vary primarily by hollow-shaft inner diameter and electrical connection type (flange socket vs. cable):
Standard Model Designation:
HEIDENHAIN ECN 125 2048 EnDat22
Verified ID Numbers (Id.Nr.):
• ID 810801-04: Hollow through-shaft ∅50 mm with radial M12 8-pin flange socket.
• ID 810801-06: Hollow through-shaft ∅25 mm with radial M12 8-pin flange socket.
• ID 810801-08: Hollow through-shaft ∅50 mm with fixed 5.0 m cable and M12 connector.
• ID 810801-09: Hollow through-shaft ∅38 mm with radial M12 8-pin flange socket.
• ID 810801-02: Hollow through-shaft ∅50 mm with 1.0 m connecting cable.
• ID 810801-12: Standard variant with radial flange connection found across European machine axes.
Would you like to examine its multiturn counterpart (EQN 125), or do you need the pinout configuration / mating cable part numbers for these models?
Other Types Supported
The following list shows the Heidenhain serial encoders that are either currently supported by the TI-5000JX or are under development and will soon be supported:Professional service engineer visits for installing, servo motor feedback encoder. We Send our Engineer with specialist Mitchell Electronics testing equipment to your site
| Type | Format | Serial Incremental | Cnt/RevCnt/Rev | Cables |
| ECI 1317-32 | Endat | 131072 | 128 | TI-5059 (B+R) |
| ECN 125 | Endat | 33,554,432 | 0 | TI-5662 |
| ECN 1313-2048 | Endat | 8,192 | 8,192 | TI-5031 (Siemens), T15043 Baldor), TI-5059 (Bosch/B+R) |
| ECN 1313-512 | Endat | 8,192 | 2,048 | TI-5059 (Bosch/B+R) |
| EQI 1325-32 | Endat | 8,192 | 128 | TI-5031 (Siemens) |
| EQI 1327-32 | Endat | 32,768 | 128 | TI-5059 (B+R) |
| EQI 1329-32 | Endat | 131072 | 128 | TI-5059 (B+R) |
| EQN 1325-2048 | Endat | 8,192 | 8,192 | TI-5031 (Siemens), T15043 (Baldor), TI-5059 (Bosch/B+R) |
================
================
================
========
+

+
Alignment is done as per the video instructions of Original Encoder alignment equipment manufacturer ie. Mitchell Electronics. This is done at your Own Site in UAE. No need to ship your motor out.
TI-5000JX Feedback Tester by Mitchell Electronics, Inc.
The TI-5000JX is a servo motor feedback tester product which is used to test the encoder or resolver that is used on a permanent magnet brushless AC or DC servo motor. Servo motor testing and troubleshooting requires the confirmation of certain key parameters.
There are many reasons a servo motor may stop working. In many cases the servo motor can be easily repaired, and in other cases the servo motor may not even be broken. It is necessary to test the servo motor feedback device, verify proper counting, and check for the presence of encoder error codes
Universal Servo Motor Run Testing
TI-3000JX Run Test Product by Mitchell Electronics, Inc.
The TI-3000JX is a servo motor run test product which is used to run a permanent magnet brushless AC or DC servo motor. A servo motor run test system acts as a universal servo motor drive providing a diagnostic test before or after a servo motor repair.
Manufacturer specific servo motor drives have many complicated features and can be optimized for many customer applications but can be difficult and time consuming to configure. And besides, it is also not always practical to have a spare servo motor drive for every servo motor that you wish to run. The TI-3000JX acts as a generic servo motor drive enabling the configuration of an unloaded servo motor run test in a matter of seconds in a standardized way regardless of the servo motor manufacturer.
- Signal Check, Testing HEIDENHAIN ECN 125 2048 810801-04:
- Troubleshooting HEIDENHAIN ECN 125 2048 EnDat22 encoder
- Repair for HEIDENHAIN ECN 125 2048 EnDat22
- Diagnosis of Signal Errors HEIDENHAIN ECN 125 2048 810801-06: 810801-08 Encoders Using Mitchell Ti-5000 JX
CNC Machine Brands | Types We Support
We offer inspection, diagnostics and selected repair services for CNC Machine Tools of Following types from the brands below. Service availability depends on the model, condition and required work.
• DMG MORI • Mazak / Yamazaki Mazak • Haas Automation • Okuma • Fanuc • DN Solutions • Makino • Trumpf • Siemens • Hwacheon • SMTCL • Hardinge / Bridgeport • Hurco • Emco • GROB & Chiron • Tornos & Studer • Bystronic & Amada • Sodick • Brother • Kitamura • Matsuura • Miyano & Citizen • Nakamura-Tome • Tsugami
Servo Systems | Types We Support
We offer inspection, diagnostics and selected repair services for Servo Motors | Drives of Following types from the brands below. Service availability depends on the model, condition and required work.
Can’t see your Machine brand? Send us the Machine Name/ model and a clear nameplate photograph so we can check.
ABB • Advanced Motion Controls (AMC) • AMK Motion • Baldor • Baumueller |Baumüller • Beckhoff • Bosch |Rexroth | Indramat • Delta Electronics • FANUC Corporation • Fuji Electric • Kollmorgen • Lenze • Mitsubishi • Moog • Omron • Pansonic • Allen-Bradley • Sanyo Denki • Schneider Electric • Siemens • Tamagawa Seiki • Yaskawa
Can’t see your Servo Motor Brand? Send us the Motor Name/ model and a clear nameplate photograph so we can check.
Encoder Brands We Support
We offer inspection, diagnostics and selected repair services for encoders from the brands below. Service availability depends on the model, condition and required work.
Baumer | Thalheim | IVO, Henglster, Indramat | Rexroth, Kubler, Leine linde, Lika, Renco, Sanyo Denki, Sick | Stegmann, Sumtak, Tamagawa, Acu-Rite Solutions, Allen Bradley Rockwell, ASM (Automation Sensorik Messtechnik GmbH), Automation Direct, Autonics, Avtron Encoders, Balluff, BEI, CHANG SING | etek, Delta Electronics, DRC | Dynamic Research Corporation, Dynapar, Elcis, ELCO, Encoder Products Company, Euchner, Fagor, GIVI MISURE S.R.L, Hanyoung Nux, Heidenhain, HOHNER, Hontko, Hubner Berlin, IFM Electronics, Koyo | JTEKT, Kwangwoo, LS Electric | MECAPION | LSIS, METIRIO, MFE | Panasonic, Nemicon, OMRON, Ono-Sokki, Pepperl + Fuchs, portescap, Posital, Red Lion Encoders, RSF Austria, SCANCON, Sensata | Newall, SensorLab, Siemens, SIKO, Sony/Magnescale, Stegmann, Tamagawa, TEKEL, TIMKEN, TR Electronic, US Digital, Wachendorff
Can’t see your brand? Send us the encoder model and a clear nameplate photograph so we can check. Independent service provider. Brand names identify equipment we support and do not imply manufacturer authorisation or affiliation.
Servo Motor Repair-Inspection-Health Check-Alignment FAQs
Answers to common questions about encoder checks, alignment, repairs and sending equipment to our Ajman workshop.
What does the Servo motor Encoder Alignment service offer ?
Servo motors are Used on Automated machines controlled by CNC, PLC. To function properly, permanent magnet brushless motors depend on position feedback devices such as Hall Effect transducers, resolvers, incremental encoders, and serial encoders which require precise alignment. We have invested in Purchase & Licensing of Mitchell Electronics, Inc. products to meet the maintenance challenges presented by these modern motors and feedback devices. We can assure First Time Fix & Factory Quality Alignment using such world renowned equipment
Why did you Trust Mitchell Electronics as Supplier for Feedback alignment system ?
"Ajman Factories" established our base in UAE way back in 2003, We already use encoder diagnostic equipment from Heidenhain, Sick and Baumer, and Calibration equipment from Renishaw. When in came to choosing our Partners in Servo Motor Encoder Alignment Equipment, in order to Compliment what equipment we already had, We chose Mitchell Electronics. We could not have settled for any less than Mitchell, Given their Proven track record in support and DNA of Innovation built, They are the World leaders in Servo motor repair/ alignment equipment. Learn more about them at https://www.mitchell-electronics.com/about-us/|| How can you support our Target of 100% Uptime of our Machinery ? We can ensure 100% uptime for your Servo systems using the Predictive Maintenace progam developed by our Company. We can ensure Same Day Repair of Most Servo motors. Contact us with your Machine, motor details and we talk.
We want to Ensure same day repair for our Servo motor. How can it be made Possible?
We can ensure Same Day Repair of Most Servo motors. We have pro Active Maintenace program for servo motors specifically targeted to achieve your uptime, and machine effectivenss objectives. Contact us with your Machine, motor details and we talk.
Not sure if the problem is Motor ? Or Drive ? Or Encoder or Evaluation electronics Can you Help??
Yes our Engineer visits you with Mitchell Electronics TI-5000JX & TI-3000JX Test Equipment. We can check operation of Feedback system at Site & identify signal errors if there is any. Once you know the encoder Feedback is in Working order you can concentrate on other issues.
I have a Heavy motor Removing and Shipping Costs time/ Money. can you Replace encoder | Align encoder at Site. ??
Yes our Engineer visits you with Mitchell Electronics TI-5000JX & TI-3000JX Test Equipment. We shall Record the alignment of Old encoder and install new encoder in its place. You can provide the encoder or you can Order the encoder from us prior to the visit.
Do you have Ready Stock Encoders/ motorfeedbacks in stock?
We stock incremental Rotary encoders, absolute encoders and Resolvers of different types e.g. Quadature, SSI, Endat, Hiperface, Profibus etc..
What types of CNC Machines Spares do you stock?
We stock Linear scales, rotary encoders, servo drive cards, cables, connectors, pneumatic parts, Hydraulic actuators, servo motors, drives, fuse, fans and Sensors for ATC and turret encoders ...etc.
Can you repair encoder connectors and cables?
We offer encoder connector repair or replacement and encoder cable repair, subject to inspection and the availability of suitable parts. Please include photographs of any visible damage when sending your enquiry.
Do you offer PPR programming or encoder memory backup?
PPR programming, memory backup, copying and restoration are available for compatible encoder models. Send us the exact model details and your requirements so we can confirm whether these services are supported.
Where are you located?
Ajman Factories Equipment is located in Ajman, United Arab Emirates. Contact us before visiting or sending equipment so we can provide the workshop location and receiving instructions.
When was Ajman Factories Equipment established?
Ajman Factories Equipment was established in 2003.
How do I ship a faulty Servo Motor for reconditioning to you?
Send us a service request with the Servo motor make, model, fault description and your contact details. We will send you a Material Shipping Note with the delivery instructions. Include a copy of the note with your shipment so we can identify your encoder on arrival.
What information should I include in my service request?
Please include the make and model, clear nameplate and connector photographs, a description of the fault, and the machine or motor on which it is installed. Let us know whether you require workshop testing or an on-site visit.