HEIDENHAIN ECN 1313 512 62S12-71 Encoder Testing, Diagnosis, Alignment, Memory Report, Programming

HEIDENHAIN ECN 1313 512 62S12-71 Encoder Testing, Diagnosis, Alignment, Memory Report, Programming

$80.00
Skip to product information
HEIDENHAIN ECN 1313 512 62S12-71 Encoder Testing, Diagnosis, Alignment, Memory Report, Programming

HEIDENHAIN ECN 1313 512 62S12-71 Encoder Testing, Diagnosis, Alignment, Memory Report, Programming

  • Established in 2003, Ajman Factories is pioneers in Servo motor repairing in United Arab Emirates
  • in 2006- First Importer of Mitchell system in United Arab Emirates.
  • Servo motor repairs using Mitchell Electronics, Inc. (MEI) TI-5000JX & Run Test Equipment TI-3000JX system
  • Supporting Maintenance teams | Motor rewinders Repair Servo motors In house in UAE with Mitchell | Heidenhain | Sick | Baumer |Dynapar |Schneider Servo Repair Specialised Equipment ( Hire Equipment Time/ Engineering service) 

Request Servo System Troubleshooting, Repair or Mainenance Service with Mitchell Electronic Inc. TI-5000JX Encoder Alignment and | TI-3000JX servo motor run test equipment

Experiencing Servo Motor Errors | Servo Motor Alarms | - Heidenhain- Sick - Hengstler Encoder Faults, other Machine Fault? Cable Broken- Need Repair/ Replacement? Tell us about your machine, describe the fault, and upload supporting screenshots or photographs. Our technical team will review your request for online assistance or a field visit.

1. Contact Details

2. Type of Assistance Required

Select consultation type *

3. Servo Motor Information

4. Nature of Machine Problem

Include actual measurements, axis details, cutting conditions and fault history where relevant.

5. Upload Screenshots, Photos & PDFs

Attach Alarm code, Name Plate Photo, Machine setup, Encoder Connector| Power connector Photographs or Application relevant diagrams.

JPG, PNG or PDF. Maximum 10 MB combined. Up to 6 files.

Only upload documents and images you are authorised to share. Do not include passwords or confidential production information.

Submission is a request for assistance. An appointment is confirmed only after our team contacts you.

HEIDENHAIN ECN 1313 512 62S12-71 Absolute Encoder Testing, Repair and Alignment Service at your site in UAE.

We test ECN131351262S12-71 (ECN131351262S12-78) , repair or replace it and align it to the rotor.

Servo motors Brands using this Encoder: • Bosch Rexroth / Indramat Motors • Kollmorgen Motors • B&R Industrial Automation : • Nidec / Leroy-Somer / Control Techniques 

We Arrange visit of our Expert engineer with Mitchell Electronics, Inc. Servo Motor Testing & Encoder Encoder Testing, Diagnosis, Alignment, Memory Report, Programming Equipments :

  • TI-5000JX is a servo motor feedback tester
  • The TI-3000JX is a servo motor run test equipment 
  • We have different modules  for interfacing different Encoders ( endat, hiperface,1vss,TTL, HTl, SSI) and  cables specific to encoder / servo motor model etc.
  •  We have Ready made cables for hooking this encoder to our Servo motor testing system.. 
  • Our expert services and Equipment time include : Servo Motor Repair Products for Encoder alignment and servo motor run test

  • Encoder testing Products : for Encoder Testing, Diagnosis, Alignment, Memory Report, Programming

    • Encoder Testing | Servo repair Support in the Factory - At Your Site in UAE

    • Reduce downtime - lets help you plan for Same day Servo motor Repair. Lets help you move towards and achieve 100% Uptime of your Servo Setup.

    • Implement Quality Assurance - Know condition of your servo motor and ensure Quality Production

    • Condition Monitoring / Preventive maintenance - Know the Current Signal performance of Encoders and know if it about to fail and plan Next replacement.

    • Pro-Active Maintenance- Record Alignment of All your Servo motor encoders in Advance.
      --------------------------------

Here are Details | Example uses | bit of Specification of 

ECN 1313 512 62S12-71

 

ECN/EQN 1300 series

Absolute rotary encoders with integral bearing

  • Wide axial tolerance of up to ±0.5 mm
  • Tapered shaft
  • Very high positioning accuracy of down to ±20"
  • 33 554 432 positions/rev.
  • Multiturn functionality for up to 4096 revolutions
  • Max. operating temperature: 115 °C
  • Evaluation of different external temperature sensors 
  • Interfaces: EnDat and DRIVE-CLiQ
  • Housing diameter ≈ 56 mm
 
HEIDENHAIN ECN 1313-512 (or ECN 1313 512) AOptical Absolute Singleturn Rotary EncoderIt incorporates integral bearings and stator coupling. It is based on optical scanning technology, unlike inductive models (such as the ECI 1317).

1.ECN 1313-512Technical Specifications

• Scanning Principle: Optical scanning.
• Integral Bearing: Built-in bearings and stator coupling (expanding ring / 06 coupling).
• Single-turn resolution (Positions/Rev): 8,192 positions per revolution (13-bit absolute).
• Incremental Signals (Line Count): 512 sine/cosine signals (~1 Vpp).
• Interface:  HEIDENHAIN EnDat01 / EnDat 2.2 (some special variants also come with SSI interface).
• Mechanical shaft: 9.25 mm tapered shaft (1:10 taper).
• Operating Voltage: DC 3.6 V to 14 V.
• Operating temperature: -40 °C to +115 °C.
• Protection Class: IP40 (when mounted).

2. Known Servo Motor Brands and Models (ECN 1313-512)

• Bosch Rexroth / Indramat Motors: 
• Models used: MKDAndMHDSeries synchronous servo motors (such asMKD041,MKD071, MHD093 etc.) .
• Feedback nameplate code: On Indramat digital encoder nameplates this is often recorded as HSF03SN-H or Digital Feedback Code.
• Kollmorgen Motors:
• Models used:  AKM family (AKM2, AKM4, AKM5, AKM6) and Goldline servo motors.
• Feedback Code: EnDat 512-line single-turn feedback as an option in the motor order code.
• B&R Industrial Automation :
• Models used: 1st and 2nd generation 8LS and 8MS servo motors with Optical EnDat option.
• Nidec / Leroy-Somer / Control Techniques :
• Models used:  Unimotor FM and Unimotor HD series.
• Feedback code: 'FB' code on the motor nameplate (Optical EnDat SinCos Single-turn ECN 1313).

3. Complete Part Numbers & Verified Id.Nr. (HEIDENHAIN)

Standard Part Designation:
HEIDENHAIN ECN 1313 512 62S12-71 (or 62S12-78)
Verified ID Number (Id.Nr.):
• : ID 317 283-02 (The most famous original part number for HSF03SN-H feedback in Bosch Rexroth / Indramat motors).
• : ID 317 283-12 (62S12-71 configuration in Indramat and other European CNC motors).
• : ID 312 211-xx (dedicated OEM ID number for Kollmorgen AKM servo motors).
• : ID 586 640-11 (upgraded 62S12-78 model).
If you would like to see the multi-turn equivalent of this encoder , the EQN 1325-512, or want to set the commutation offset (Angle Alignment) after replacing the motor , let us know.

 

Other Types Supported

The following list shows the Heidenhain serial encoders that are either currently supported by the TI-5000JX or are under development and will soon be supported:Professional service engineer visits for installing, servo motor feedback encoder. We Send our Engineer with specialist Mitchell Electronics testing equipment to your site  

Type Format Serial Incremental Cnt/RevCnt/Rev Cables
ECI 1317-32 Endat 131072 128 TI-5059 (B+R)
ECN 125 Endat 33,554,432 0 TI-5662
ECN 1313-2048 Endat 8,192 8,192 TI-5031 (Siemens), T15043 Baldor), TI-5059 (Bosch/B+R)
ECN 1313-512 Endat 8,192 2,048 TI-5059 (Bosch/B+R)
EQI 1325-32 Endat 8,192 128 TI-5031 (Siemens)
EQI 1327-32 Endat 32,768 128 TI-5059 (B+R)
EQI 1329-32 Endat 131072 128 TI-5059 (B+R)
EQN 1325-2048 Endat 8,192 8,192 TI-5031 (Siemens), T15043 (Baldor), TI-5059 (Bosch/B+R)

 

Product Variants: supported

ID Number: 1087512-04
EQN1337F 2048 5MS16-C9 K 0.00 .. 65B07B 40 01 .. .. D Fanuc06 37 01 ..
Fanuc06 Serial interface FANUC ALPHAi
ID Number: 1179144-02
ECN1324S 2048 5MS16-XN K 0.00 .. 65B07B 40 01 .. .. D DQ01 39 01 FS
DQ01 DRIVE-CLiQ encoder interface DQ01
ID Number: 1179144-04
ECN1324S 2048 5MS16-XN K 0.00 .. 67M07B 40 01 .. .. D DQ01 39 01 FS
DQ01 DRIVE-CLiQ encoder interface DQ01
ID Number: 1179145-03
EQN1336S 2048 5MS16-XN K 0.00 .. 65B07B 40 01 .. .. D DQ01 39 01 FS
DQ01 DRIVE-CLiQ encoder interface DQ01
ID Number: 1179145-04
EQN1336S 2048 5MS16-XN K 0.00 .. 67M07B 40 01 .. .. D DQ01 39 01 FS
DQ01 DRIVE-CLiQ encoder interface DQ01
ID Number: 1185233-02
EQN1336S 2048 5MS16-XN K 0.00 .. 65B07B 40 01 .. .. D DQ01 39 01 ..
DQ01 DRIVE-CLiQ encoder interface DQ01
ID Number: 1178026-03
ECN1325 2048 5MS16-C9 K 0.00 .. 65B07B 40 01 .. .. D EnDat22 37 01 FS
ID Number: 1178019-01
ECN1325 2048 5MS16-C9 K 0.00 .. 65B06 40 01 .. .. D EnDat22 37 01 ..
ID Number: 1178019-11
ECN1325 2048 5MS16-C9 K 0.00 .. 65B07B 40 01 .. .. D EnDat22 37 01 ..
ID Number: 1178020-01
EQN1337 2048 5MS16-C9 K 0.00 .. 65B06 40 01 .. .. D EnDat22 37 01 ..
ID Number: 1178020-03
EQN1337 2048 5MS16-C9 K 0.00 .. 65B07B 40 01 .. .. D EnDat22 37 01 ..
ID Number: 1216969-01
ECN1325F 2048 5MS16-C9 K 0.00 .. 65B07B 40 01 .. .. D Fanuc05 37 01 ..
Fanuc05 Serial interface FANUC ALPHA/ALPHAi
ID Number: 768295-03
ECN 1313 2048 62S12-78 K 0.00 .. 65B06 40 01 .. .. D EnDat01 37 01 ..
ID Number: 768295-11
ECN 1313 512 62S12-78 K 0.00 .. 65B06 40 01 .. .. D EnDat01 37 01 ..
ID Number: 768295-21
ECN 1313 512 62S12-78 K 0.00 .. 65B07B 40 01 .. .. D EnDat01 37 01 ..
ID Number: 823901-52
EQN 1325 2048 62S12-78 K 0.00 .. 65B.. 40 09 .. .. D EnDat01 37 01 ..
ID Number: 827039-03
EQN 1325 2048 62S12-78 K 0.00 .. 65B07B 40 01 .. .. D EnDat01 37 01 ..
ID Number: 827039-04
EQN 1325 512 62S12-78 K 0.00 .. 65B06 40 01 .. .. D EnDat01 37 01 ..
ID Number: 827039-06
EQN 1325 2048 62S12-78 K 0.00 .. 65B06 40 01 .. .. D EnDat01 37 01 ..
ID Number: 827039-19
EQN 1325 512 62S12-78 K 0.00 .. 65B07B 40 01 .. .. D EnDat01 37 01 ..
ID Number: 1178027-01
EQN1337 2048 5MS16-C9 K 0.00 .. 65B07B 40 01 .. .. D EnDat22 37 01 FS
ID Number: 768295-12
ECN 1313 2048 62S12-78 K 0.00 .. 65B07B 40 01 .. .. D EnDat01 37 01 ..

  Why User should NOT Attempt Removal of Heidenhain Factory Fitted Encoders  ? Why you should call Expert Help for Dismantling Encoders from Servo Motor
For Dismantling Resolver Encoder special tools, Care and Expertise is Needed. Any Misadventure, or excess enthusiasm in dismantling without Tools means inviting disaster for encoder. so stop and ask for expert help. Specialist support can help reduce the risk of damage during removal. Send us the equipment model, installation details and photographs so we can assess your requirements and advise on the appropriate service.
 Can you Replace Heidenhain EnDat Encoder on Servo motor at our Site? Can you Program it & Align its Rotary Angle?
If the EQI encoder used on your Servo Motor, has failed or needs Alignment or testing, then we are perfectly equipped to handle its installation, Checking, Recording alignment and restoring new encoder to same angular alignment. the Equipment supplied by Mitchell Electronics Inc. TI-5000JX supports it fully with Siemens Memory Programming test to write a new angle into the memory data that matches your current alignment.

================

What does the Specialist Service Engineer Visit include?

Book a professional service engineer from Ajman Factories Equipment Trading to visit your factory, workshop or machine site for specialized servo motor feedback testing, troubleshooting, encoder installation, adjustment and alignment.

Depending on the motor, encoder and site conditions, our services include:

  • Servo motor encoder and resolver health checks
  • Encoder signal inspection and feedback diagnostics
  • Investigation of communication errors and feedback faults
  • Encoder installation, replacement and mechanical adjustment
  • Encoder-to-motor commutation alignment and verification
  • Feedback parameter and encoder memory checks, where supported
  • Verification following encoder replacement or motor repair
  • Compatible servo motor run testing, where safe and practical

You may book our service for diagnosis and testing alone. Encoder replacement or complete motor repair is not always necessary.

 Can you replace and align Heidenhain ECN | ECI | EQN| ERN Endat encoders at our factory?

We offer specialist assessment and field replacement services for compatible Heidenhain ECN Endat motor feedback encoders installed on servo motors.

Our engineer can evaluate the existing feedback system, inspect encoder signals and investigate faults before proceeding with removal or replacement.

Where motor design, compatibility, mechanical access and available technical data permit, we can undertake encoder installation, adjustment and alignment using appropriate specialist test equipment.

Some applications require the motor to be disconnected, removed or transferred to a suitable testing area before alignment can be performed safely.

Our objective is to reduce unnecessary component replacement and avoid avoidable machine downtime while restoring reliable feedback operation wherever technically feasible.

View an example of our servo motor feedback alignment service

Can you diagnose encoder problems without replacing the encoder?

Yes. You can book our service engineer to evaluate the condition of an existing servo motor feedback system without requesting encoder replacement.

We can inspect feedback signals, investigate encoder communication faults, check for diagnostic errors, assess alignment and verify motor feedback performance using appropriate equipment.

Rather than relying on basic electrical checks alone, we use dedicated testing instruments to investigate the feedback system and help identify the likely cause of the reported problem.

The objective is to help distinguish encoder-related problems from other possible causes, avoid unnecessary component replacement and identify a practical repair approach.

What specialist testing and alignment equipment do you use?

Ajman Factories Equipment Trading has been using Mitchell Electronics equipment since 2016.

We have invested in specialized servo motor feedback testing, diagnostic and alignment systems for our workshop and travelling service operations.

Mitchell Electronics TI-5000JX – Feedback Test & Alignment System

Our primary platform for compatible servo motor encoder and resolver diagnostics, feedback signal testing, encoder alignment verification and electronic commutation alignment.

Depending on feedback-system compatibility, it enables communication checks, signal monitoring, diagnostic investigation and examination of motor-to-encoder alignment.

Mitchell Electronics TI-3000JX – Servo Motor Run Test System with Amplifier

A specialized system used to evaluate compatible servo motors independently of their original machine drives.

Where safe and appropriate, unloaded motor run tests can help assess operation and feedback performance before or after repair.

Supporting Modules, Cables and Adapters

We maintain a comprehensive range of interface modules, cables, adapters and supporting accessories for different servo motor and feedback configurations.

Additional OEM-Specific Instruments

We also use specialist encoder inspection, diagnostic and alignment verification equipment from manufacturers including HEIDENHAIN, Baumer and Heidenhain.

Equipment is selected for each assignment according to the motor, feedback technology and technical compatibility.

Do you offer on-site engineer visits across the UAE?

Yes. We offer professional on-site service arrangements across the United Arab Emirates, including:

Dubai | Abu Dhabi | Sharjah | Ajman | Other Emirates

Our engineer can visit your factory, workshop or machine location with specialist diagnostic instruments and compatible Mitchell Electronics testing equipment.

Where site access, equipment compatibility and safe working conditions permit, testing and troubleshooting can be performed at your facility.

Some encoder replacement, alignment or motor run-testing procedures may require the motor to be electrically isolated, disconnected, removed from the machine or transferred to a suitable testing area.

Our objective is to establish the nature of the fault before recommending unnecessary motor removal, transportation or component replacement.

Visit availability and technical requirements are confirmed before scheduling.

Can customers outside the UAE ship their servo motors to you?

Yes. We offer workshop-based inspection, diagnostic and repair arrangements for customers in:

Saudi Arabia | Oman | Qatar | Bahrain | Other International Locations

Contact Ajman Factories Equipment Trading before sending your servo motor or feedback assembly to our UAE workshop.

Our team can inspect the equipment, investigate reported faults and perform applicable testing, alignment or repair procedures.

Return shipment can be arranged following completion of the agreed service.

International shipping, customs clearance, repair estimates and return arrangements are confirmed separately.

 Which kind of Motors use EQI Endat Encoder System?
Motor feedback systems Heidenhain EQI Endat are Absolute motor feedback system with EnDAT for rugged servo applications This motor feedback systems offer good performance for rugged servo drives. The  design ensures efficiency and ruggedness. The communication via EnDAT is compatible with the leading frequency inverters and supports the operator with automated commissioning of the application. Other features  include the universal attachment design and the reliable and maintenance-free design.

================

What is EnDAT communication interface for servo systems?

EnDat is the ideal interface for digital drive systems and position control loops with position encoders for measurement feedback. 

EnDat provides high system reliability through the following features:

  • Fast data transmission and high transmission reliability
  • Transmission of additional data, such as motor-specific parameters and sensor data
  • Extensive diagnostics and the ability to integrate encoders into troubleshooting routines

These features and benefits have made EnDat a standard and globally established interface within the following industries:

  • Machine tools
  • Electronics
  • Automation

================

What information do you need to arrange a service visit?

To arrange a specialist service engineer visit or workshop inspection, please contact Ajman Factories Equipment Trading with the following information:

  • Machine manufacturer and model
  • Servo motor make and complete model or part number
  • Encoder manufacturer and exact model or part number
  • Servo drive or controller model, where available
  • Fault description, alarm codes or observed symptoms
  • Factory or machine location
  • Whether you require on-site service or workshop repair

Photographs of the motor nameplate, encoder label, connectors and relevant alarm messages are especially helpful.

We will review your information, assess technical compatibility, confirm the proposed service scope and advise on equipment requirements and visit arrangements.

Are all encoder testing and alignment procedures supported?

Availability of testing, encoder programming, memory operations, electronic or mechanical alignment and servo motor run testing depends on the exact equipment configuration.

Important considerations include:

  • Servo motor manufacturer and model
  • Encoder and feedback technology
  • Servo drive and controller configuration
  • Availability of suitable technical data
  • Test equipment and interface compatibility
  • Electrical isolation and safe working conditions
  • Mechanical access and site conditions

Diagnosis may establish that additional components, replacement parts or workshop repairs are necessary.

A successful repair, encoder alignment or restoration of motor operation cannot be guaranteed before technical assessment.

========

 

+

TI-5094Stegmann_Hiperface_SKS/SKM_SEL/SEK_Direct-to-Encoder_Feedback_Test_Cable_8_pin_JST_(Requires_TI-5104)

+

Alignment is done as per the video instructions of Original Encoder alignment equipment manufacturer ie. Mitchell Electronics. This is done at your Own Site in UAE. No need to ship your motor out. 

Encoder Alignment Made Easy

TI-5000JX Feedback Tester by Mitchell Electronics, Inc.

The TI-5000JX is a servo motor feedback tester product which is used to test the encoder or resolver that is used on a permanent magnet brushless AC or DC servo motor. Servo motor testing and troubleshooting requires the confirmation of certain key parameters.

There are many reasons a servo motor may stop working. In many cases the servo motor can be easily repaired, and in other cases the servo motor may not even be broken. It is necessary to test the servo motor feedback device, verify proper counting, and check for the presence of encoder error codes


 

Universal Servo Motor Run Testing

TI-3000JX Run Test Product by Mitchell Electronics, Inc.

The TI-3000JX is a servo motor run test product which is used to run a permanent magnet brushless AC or DC servo motor. A servo motor run test system acts as a universal servo motor drive providing a diagnostic test before or after a servo motor repair.

Manufacturer specific servo motor drives have many complicated features and can be optimized for many customer applications but can be difficult and time consuming to configure. And besides, it is also not always practical to have a spare servo motor drive for every servo motor that you wish to run. The TI-3000JX acts as a generic servo motor drive enabling the configuration of an unloaded servo motor run test in a matter of seconds in a standardized way regardless of the servo motor manufacturer.

  • Signal Check, Testing HEIDENHAIN ID 317 283-02 for HSF03SN-H
  • Troubleshooting ECN 1313 512 62S12-71 encoder
  • Repair for HEIDENHAIN ECN 1313 512 62S12-78
  • Diagnosis of Signal Errors ECN 1313 512 62S12-71 ID 317 283-12 Encoders Using Mitchell Ti-5000 JX
  • We Offer Repair, Adjustment, Alignment ECN1313 512 62S1271 Endat Heidenhain Encoder using Mitchell Ti-5000 on B&R 8LS/8MS motors)
  • We do Angle Alignment of Endat Encoder ID 586 640-11 ( ECN 1313 512 62S12-78 on servo motors. using Mitchell Ti-5000 JX at Your site in UAE

CNC Machine Brands | Types We Support

We offer inspection, diagnostics and selected repair services for CNC Machine Tools of Following types from the brands below. Service availability depends on the model, condition and required work.

• DMG MORI • Mazak / Yamazaki Mazak • Haas Automation • Okuma • Fanuc • DN Solutions • Makino • Trumpf • Siemens • Hwacheon • SMTCL • Hardinge / Bridgeport • Hurco • Emco • GROB & Chiron • Tornos & Studer • Bystronic & Amada • Sodick • Brother • Kitamura • Matsuura • Miyano & Citizen • Nakamura-Tome • Tsugami

Servo Systems | Types We Support

We offer inspection, diagnostics and selected repair services for Servo Motors | Drives of Following types from the brands below. Service availability depends on the model, condition and required work.

Can’t see your Machine brand? Send us the Machine Name/ model and a clear nameplate photograph so we can check.

ABB • Advanced Motion Controls (AMC) • AMK Motion • Baldor • Baumueller |Baumüller • Beckhoff • Bosch |Rexroth | Indramat • Delta Electronics • FANUC Corporation • Fuji Electric • Kollmorgen • Lenze • Mitsubishi • Moog • Omron • Pansonic • Allen-Bradley • Sanyo Denki • Schneider Electric • Siemens • Tamagawa Seiki • Yaskawa

Can’t see your Servo Motor Brand? Send us the Motor Name/ model and a clear nameplate photograph so we can check.

Encoder Brands We Support

We offer inspection, diagnostics and selected repair services for encoders from the brands below. Service availability depends on the model, condition and required work.

Baumer | Thalheim | IVO, Henglster, Indramat | Rexroth, Kubler, Leine linde, Lika, Renco, Sanyo Denki, Sick | Stegmann, Sumtak, Tamagawa, Acu-Rite Solutions, Allen Bradley Rockwell, ASM (Automation Sensorik Messtechnik GmbH), Automation Direct, Autonics, Avtron Encoders, Balluff, BEI, CHANG SING | etek, Delta Electronics, DRC | Dynamic Research Corporation, Dynapar, Elcis, ELCO, Encoder Products Company, Euchner, Fagor, GIVI MISURE S.R.L, Hanyoung Nux, Heidenhain, HOHNER, Hontko, Hubner Berlin, IFM Electronics, Koyo | JTEKT, Kwangwoo, LS Electric | MECAPION | LSIS, METIRIO, MFE | Panasonic, Nemicon, OMRON, Ono-Sokki, Pepperl + Fuchs, portescap, Posital, Red Lion Encoders, RSF Austria, SCANCON, Sensata | Newall, SensorLab, Siemens, SIKO, Sony/Magnescale, Stegmann, Tamagawa, TEKEL, TIMKEN, TR Electronic, US Digital, Wachendorff

Can’t see your brand? Send us the encoder model and a clear nameplate photograph so we can check. Independent service provider. Brand names identify equipment we support and do not imply manufacturer authorisation or affiliation.

Servo Motor Repair-Inspection-Health Check-Alignment FAQs

Answers to common questions about encoder checks, alignment, repairs and sending equipment to our Ajman workshop.

What does the Servo motor Encoder Alignment service offer ?

Servo motors are Used on Automated machines controlled by CNC, PLC. To function properly, permanent magnet brushless motors depend on position feedback devices such as Hall Effect transducers, resolvers, incremental encoders, and serial encoders which require precise alignment. We have invested in Purchase & Licensing of Mitchell Electronics, Inc. products to meet the maintenance challenges presented by these modern motors and feedback devices. We can assure First Time Fix & Factory Quality Alignment using such world renowned equipment

Why did you Trust Mitchell Electronics as Supplier for Feedback alignment system ?

"Ajman Factories" established our base in UAE way back in 2003, We already use encoder diagnostic equipment from Heidenhain, Sick and Baumer, and Calibration equipment from Renishaw. When in came to choosing our Partners in Servo Motor Encoder Alignment Equipment, in order to Compliment what equipment we already had, We chose Mitchell Electronics. We could not have settled for any less than Mitchell, Given their Proven track record in support and DNA of Innovation built, They are the World leaders in Servo motor repair/ alignment equipment. Learn more about them at https://www.mitchell-electronics.com/about-us/|| How can you support our Target of 100% Uptime of our Machinery ? We can ensure 100% uptime for your Servo systems using the Predictive Maintenace progam developed by our Company. We can ensure Same Day Repair of Most Servo motors. Contact us with your Machine, motor details and we talk.

We want to Ensure same day repair for our Servo motor. How can it be made Possible?

We can ensure Same Day Repair of Most Servo motors. We have pro Active Maintenace program for servo motors specifically targeted to achieve your uptime, and machine effectivenss objectives. Contact us with your Machine, motor details and we talk.

Not sure if the problem is Motor ? Or Drive ? Or Encoder or Evaluation electronics Can you Help??

Yes our Engineer visits you with Mitchell Electronics TI-5000JX & TI-3000JX Test Equipment. We can check operation of Feedback system at Site & identify signal errors if there is any. Once you know the encoder Feedback is in Working order you can concentrate on other issues.

I have a Heavy motor Removing and Shipping Costs time/ Money. can you Replace encoder | Align encoder at Site. ??

Yes our Engineer visits you with Mitchell Electronics TI-5000JX & TI-3000JX Test Equipment. We shall Record the alignment of Old encoder and install new encoder in its place. You can provide the encoder or you can Order the encoder from us prior to the visit.

Do you have Ready Stock Encoders/ motorfeedbacks in stock?

We stock incremental Rotary encoders, absolute encoders and Resolvers of different types e.g. Quadature, SSI, Endat, Hiperface, Profibus etc..

What types of CNC Machines Spares do you stock?

We stock Linear scales, rotary encoders, servo drive cards, cables, connectors, pneumatic parts, Hydraulic actuators, servo motors, drives, fuse, fans and Sensors for ATC and turret encoders ...etc.

Can you repair encoder connectors and cables?

We offer encoder connector repair or replacement and encoder cable repair, subject to inspection and the availability of suitable parts. Please include photographs of any visible damage when sending your enquiry.

Do you offer PPR programming or encoder memory backup?

PPR programming, memory backup, copying and restoration are available for compatible encoder models. Send us the exact model details and your requirements so we can confirm whether these services are supported.

Where are you located?

Ajman Factories Equipment is located in Ajman, United Arab Emirates. Contact us before visiting or sending equipment so we can provide the workshop location and receiving instructions.

When was Ajman Factories Equipment established?

Ajman Factories Equipment was established in 2003.

How do I ship a faulty Servo Motor for reconditioning to you?

Send us a service request with the Servo motor make, model, fault description and your contact details. We will send you a Material Shipping Note with the delivery instructions. Include a copy of the note with your shipment so we can identify your encoder on arrival.

What information should I include in my service request?

Please include the make and model, clear nameplate and connector photographs, a description of the fault, and the machine or motor on which it is installed. Let us know whether you require workshop testing or an on-site visit.

Shop The Full Collection

04998359 SEW Eurodrive - BE5A/28NM/WB400

1051000 EBI INOX Bevel Mite® 230V Bevelling Machine for INOX | Stainless Steel Edge Rounding/ Chamfering Plates/ Pipes

11 µAPP | 11 µASS (Sinusoidal-Current signals) Encoder Error Diagnostic Signal check Service| Repair - OnSite Wiring Installation

1123110 (ABIS-B) Pneumatic Bevelling Edge Preparation, Rounding, Chamfering machine