What specialist testing can show
TI-5000JX bench. Mitchell lists BiSS for AKM. Confirm the exact encoder, BiSS-B selection and fixture on TI-5000JX.
TI-3000JX motor run. Mitchell lists AKM BiSS among supported motor options. Verify the actual encoder profile, motor poles and fixture.
Starting lead. Use the verified AKM AB connector and fitted BiSS-B encoder fixture.
Kollmorgen AKM AB BiSS-B Multiturn Servo Feedback technical reference
Find your part number
Compare the fitted feedback label, complete motor order and connector. A motor order and an encoder MPN identify different items.
| ID or order | How to identify it |
|---|---|
| AKM AB | Kollmorgen’s BiSS-B multiturn optical option. Confirm the exact fitted Hengstler label and drive. |
| AKM AA | Singleturn BiSS-B branch in the same model key. Compare the full order and field structure. |
| AKM DA / DB | The EnDat 2.1 family has its own wiring and setup. Use the model key to select the actual protocol. |
Production and end-of-life status
Confirm orderability and any replacement with the manufacturer against the full fitted ID. The linked documents identify the documented setup.
Specifications
| Parameter | Verified scope |
|---|---|
| Protocol | BiSS-B on AB in the OEM code table. |
| Position data | Absolute within-turn position and a turn field. Confirm the fitted encoder resolution and frame. |
| Mechanical and connection scope | AKM motor frame, connector option and encoder model are separate fields. Verify all three. |
Interface and measuring method
The receiver exchanges clock and data with the BiSS-B encoder and decodes its position and turn fields. Verify exact frame and word lengths before treating unexpected counts as a fault.
Mounting and fit
Use the actual AKM motor outline and fitted Hengstler drawing for shaft, restraint and connector position. Record the original installation before changing the reference.
Wiring and connector scope
Choose the AKM connectivity view for the actual motor, drive and connector code. Identify clock/data, supply and return and any fitted analogue channels. Confirm the configured protocol on the receiver.
Internal motor and machine cables
Find the machine cable from the exact motor and drive pairing. Identify the OEM internal loom from the fitted feedback plug and motor revision.
Fault checks
Use the site’s isolation procedure before opening a connector or checking resistance. Secure the load against motion, lock out relevant energy sources, wait the specified discharge time and have a qualified technician verify isolation. Follow the OEM procedure for any retention battery.
What can I check on the machine?
Disconnect the harness at both ends. Check end-to-end continuity against the exact drawing, then check for unintended shorts between conductors and to the shell or shield. Compare against the documented shield bonds. Inspect pins, keying, debris, moisture and latch engagement. Check clamps or fasteners only where accessible under the approved procedure.
Use only the OEM-approved powered check and a suitable breakout. A qualified technician can compare the voltage across the specified supply and return with the model’s limits under the stated test conditions. A multimeter can check supply health. Signal integrity and communications require the appropriate signal test.
| Symptom | What to verify |
|---|---|
| Within-turn position reads and revolutions are wrong | Check that AB is fitted and that the drive expects the corresponding turn field. |
| No valid data frame | Verify BiSS-B profile, matching connector and clock/data paths. |
| Position jumps after service | Check shaft engagement, mounting and saved reference before changing drive parameters. |
Angle of alignment and commissioning
Preserve original reference, turn data and motor settings. Verify both within-turn position and rollover under the OEM commissioning procedure after fitting.
Motor and drive applications
Kollmorgen AKM with AB code
Obtain full motor order, exact Hengstler ID, frame format and starting lead.
Related SpareFaber guides
Drawings, pin maps and manuals
- Kollmorgen AKM support. Supported feedback and linked AKM code table
- Kollmorgen AKM connectivity manual. Feedback code and connector scope for the fitted AKM.
- Kollmorgen AKM product and feedback key. AA and AB code mapping.
- Mitchell-linked AKM feedback table. Model-dependent BiSS-B branches.
Questions
Can I use a similar label as a replacement?
Compare the interface, mechanical fit, connector, data or commutation requirements and OEM option before choosing a substitute. The ID table gives the useful distinctions for this guide.
What information helps with a diagnosis?
Send the encoder and motor labels, drive model, alarm history and both connector views. Say whether the problem began after cable work, encoder replacement or a drive change. We can confirm visit scope or send-in evaluation and timing from those details.
Site visit or send-in evaluation
Send the encoder and motor labels, drive model, alarm history and both connector views. Say whether the problem began after cable work, encoder replacement or a drive change. We can confirm visit scope or send-in evaluation and timing from those details.