What specialist testing can show
TI-5000JX bench. TI-5000JX MFE0017 serial checks on the documented TI-5080 MSM connector.
TI-3000JX motor run. TI-3000JX P8 C131072 MFE17 on the documented eight-pole MSM branch.
Starting lead. TI-5080 for the matched Rexroth MSM MFE0017 motor connection.
Bosch Rexroth MSM / MFE0017 Tamagawa Serial Absolute Servo Feedback technical reference
Find your part number
Compare the fitted feedback label, complete motor order and connector. A motor order and an encoder MPN identify different items.
| ID or order | How to identify it |
|---|---|
| Rexroth MSM / MFE0017 | The supported serial absolute combination in Mitchell’s Rexroth manual. Record the full motor and encoder labels. |
| MSM with a different feedback option | Mitchell describes a separate MSM option with a different setup. Verify the installed label and wiring. |
| P8 C131072 MFE17 | Mitchell’s eight-pole motor-run selection for the documented MFE0017 branch. |
Production and end-of-life status
Confirm orderability and any replacement with the manufacturer against the full fitted ID. The linked documents identify the documented setup.
Specifications
| Parameter | Verified scope |
|---|---|
| Serial position | 131,072 positions per turn on the MFE0017. |
| Power and retention | Mitchell states a 5 V supply for the documented MSM MFE0017 setup. Verify the actual retention and connector drawing. |
| Test cable | TI-5080 for the compatible MSM motor-side connector. |
Interface and measuring method
MFE0017 provides serial position and status, with turn and retention information on the absolute branch. Separate a valid reply from an absolute-reference fault and verify the actual motor pole setting.
Mounting and fit
Use the complete MSM frame and order to establish the rear assembly and fitted encoder connection. Preserve coupling position and strain relief before disassembly.
Wiring and connector scope
Use the documented TI-5080 motor connector and the MSM OEM view. Trace supply, return, data and any battery circuit separately. Check both ends of the harness.
Internal motor and machine cables
TI-5080 is a bench connection. Identify the original Rexroth machine cable by motor and drive and obtain the internal encoder lead from the fitted assembly.
Fault checks
Use the site’s isolation procedure before opening a connector or checking resistance. Secure the load against motion, lock out relevant energy sources, wait the specified discharge time and have a qualified technician verify isolation. Follow the OEM procedure for any retention battery.
What can I check on the machine?
Disconnect the harness at both ends. Check end-to-end continuity against the exact drawing, then check for unintended shorts between conductors and to the shell or shield. Compare against the documented shield bonds. Inspect pins, keying, debris, moisture and latch engagement. Check clamps or fasteners only where accessible under the approved procedure.
Use only the OEM-approved powered check and a suitable breakout. A qualified technician can compare the voltage across the specified supply and return with the model’s limits under the stated test conditions. A multimeter can check supply health. Signal integrity and communications require the appropriate signal test.
| Symptom | What to verify |
|---|---|
| No serial reply | Confirm MFE0017 option and TI-5080 plug, then check supply and the isolated harness. |
| Absolute reference is lost | Check the fitted retention circuit and save the machine reference before using the OEM recovery procedure. |
| Bench data is stable and drive trips | Review full cable, drive configuration and verified motor alignment. |
Angle of alignment and commissioning
Record the original absolute reference and approved motor data. Verify the actual commutation and reference after fitting with the matching MSM setup.
Motor and drive applications
Rexroth MSM serial absolute configuration
Obtain the full MSM order, fitted MFE0017 suffix, internal loom and drive retention procedure.
Related SpareFaber guides
Drawings, pin maps and manuals
- Rexroth Motors, TI-3000JX manual. MSM, TI-5080 and P8 C131072 MFE17
- Mitchell Rexroth TI-5000JX training chapter. MFE0017 MSM branch and TI-5080 bench connection.
- Mitchell MSM supported-types table. MSM serial type and starting cable.
- Mitchell test cable index. MSM and TI-5080 connection reference.
Questions
Can I use a similar label as a replacement?
Compare the interface, mechanical fit, connector, data or commutation requirements and OEM option before choosing a substitute. The ID table gives the useful distinctions for this guide.
What information helps with a diagnosis?
Send the encoder and motor labels, drive model, alarm history and both connector views. Say whether the problem began after cable work, encoder replacement or a drive change. We can confirm visit scope or send-in evaluation and timing from those details.
Site visit or send-in evaluation
Send the encoder and motor labels, drive model, alarm history and both connector views. Say whether the problem began after cable work, encoder replacement or a drive change. We can confirm visit scope or send-in evaluation and timing from those details.