Site visit or send-in evaluation
Share the feedback label, complete motor or machine order, drive model and alarm. Include both connector faces and note whether the issue followed a cable change, replacement or mechanical work.
What specialist testing can show
TI-5000JX bench. Mitchell documents direct connection and a version-dependent memory workflow.
TI-3000JX motor run. Mitchell excludes the integrated drive from its equipment support. Confirm any direct motor-run setup separately.
Schneider Electric Lexium 62 ILM0702P02A0000 Multiturn Servo Feedback technical reference
Find your part number
Use the full fitted label. A motor order identifies the assembly and should be recorded separately from an encoder part number.
| ID or order code | Identification and scope |
|---|---|
| ILM0702P02A0000 | Schneider 70 mm integrated drive with smooth shaft, multiturn feedback and no brake. |
| SKS/SKM | Mitchell’s encoder family reference for ILM. Verify the fitted SICK part number. |
Production and end-of-life status
Confirm current orderability and any successor for the exact ID with the manufacturer or motor OEM. The dated documentation identifies the configuration.
Specifications
| Parameter | Verified scope |
|---|---|
| OEM feedback | Sin/cos multiturn 128 as described in the exact Schneider order record. |
| Architecture | Integrated drive and motor. Confirm the direct encoder connection inside the assembly. |
| Bench | Mitchell lists TI-5094 plus TI-5104 for the documented SKS/SKM direct connection. |
Mounting and fit
Use the exact ILM order and hardware guide for connector access. Isolate the integrated drive and verify the required discharge state before opening. Match the encoder body, shaft fit and restraint by the fitted ID.
Interface and measuring method
Separate internal encoder performance from the integrated drive and external network. Mitchell describes testing directly at the encoder. Valid feedback there can help narrow the fault to the remaining harness, drive or machine-side connection.
Wiring and connector scope
Identify the fitted SICK encoder and its direct plug before connecting TI-5094. The external ILM connectors serve the assembled drive and motor. Use the OEM hardware guide and exact encoder diagram for the relevant side.
Cables inside the motor and at the machine
TI-5094 plus TI-5104 applies to the documented direct SKS/SKM connection. Verify the installed internal loom and connector by motor serial. The external ILM system cable has its own OEM drawing.
Fault checks
Before inspection. Follow the site’s isolation and lockout procedure. Secure any load against movement, allow the specified discharge time and have a qualified technician verify isolation. Check resistance on a disconnected harness at both ends. Use the documented shield and return connections.
| Observation | What to verify |
|---|---|
| External drive communication fails but direct encoder tests pass | Check the integrated drive and system connection separately. |
| Replacement reads but motor behavior changes | Check original motor-specific data, angle and the exact fitted encoder ID. |
| Memory output includes an unfamiliar motor entry | Confirm software revision and compare the data with measured incoming alignment. |
Motor and drive applications
ILM0702P02A0000, multiturn example Check the exact ID, drive and connector before applying an installation or test procedure.
Describe ILM-specific access, connection and same-motor memory checks. Link to the existing SKM36 model guide.
Angle of alignment and commissioning
Mitchell describes motor-specific memory and recommends recording incoming alignment before removal. Use the OEM procedure to compare measured alignment and original memory. Confirm that any replacement is approved for the same exact motor before restoring data.
Drawings, pin maps and manuals
- Schneider ILM feedback. Encoder connection and Memory Support. SKS/SKM and TI-5094.
- Schneider exact ILM0702P02A0000 record. Exact motor order and feedback option.
- Lexium 62 ILM hardware guide. Hardware architecture, safety and service access.