What specialist testing can show
TI-5000JX bench. Select the supported ECN 1123 serial profile and verify position, ID and communication.
TI-3000JX motor run. Obtain the actual motor, phase reference and supported run configuration.
Starting lead. Match D608296, the fitted 15-contact connector and the approved EnDat22 supply before selecting a fixture.
HEIDENHAIN ECN 1123 / 743586-01 EnDat22 Encoder technical reference
Find your part number
Compare the fitted feedback label, complete motor order and connector. A motor order and an encoder MPN identify different items.
| ID or order | How to identify it |
|---|---|
| 743586-01 | ECN 1123 with 1KA bore and 75A stator coupling. Match this order to the motor drawing. |
| 743586-51 | Collective package designation for the ECN 1123 in product information 750816. |
| 803429-01 | Separate ECN 1123 order with the same named bore and coupling types and a +115 °C upper operating rating in its own record. Qualify against the motor and safety documentation. |
| 743587-01 | EQN 1135 multiturn in the same publication. Its data includes a turn field. |
Production and end-of-life status
HEIDENHAIN maintains technical records for both cited IDs. Confirm delivery or a qualified replacement against the fitted order and required safety approval.
Specifications
| Parameter | Verified scope |
|---|---|
| Position | 8,388,608 positions per revolution, binary, singleturn. |
| Electrical | EnDat22, 3.6–14 V DC at the encoder under OEM test conditions. |
| Mounting | 1KA 6 mm blind hollow shaft with axial fastening and a 2 mm driving lug projecting 2.6 mm. 75A coupling on an M3 hole circle of 43 mm for a recessed mounting plane. |
| Housing rating | IP40 and −40 to +110 °C for ID 743586-01. |
Interface and measuring method
The EnDat master clocks the encoder and reads an absolute digital position within the current turn. Record the drive feedback choice and singleturn reference. A turn count, if the machine keeps one, belongs to the rest of the system.
Mounting and fit
Check the locating recess, driving lug, axial fastening and rear clearance against the 1KA drawing. The encoder has its own bearing and the coupling locates the stator while accommodating specified shaft motion. If the encoder rocks before it is seated, compare the mating recess and lug before tightening.
Wiring and connector scope
Match connector diagram D608296 and the 15-contact plug view in the HEIDENHAIN PDF. Locate supply and return, their sense connections, and the clock and data pairs. Use the 15-contact drawing for the internal plug and the separate M12 row where that adapter is fitted.
Internal motor and machine cables
Record the encoder output lead and the motor bulkhead separately. The product sheet distinguishes the short internal harness from the external connection. Use the strain relief called for by the drawing and identify both ends before selecting a spare.
Fault checks
Use the site’s isolation procedure before opening a connector or checking resistance. Secure the load against motion, lock out relevant energy sources, wait the specified discharge time and have a qualified technician verify isolation. Follow the OEM procedure for any retention battery.
What can I check on the machine?
Disconnect the harness at both ends. Check end-to-end continuity against the exact drawing, then check for unintended shorts between conductors and to the shell or shield. Compare against the documented shield bonds. Inspect pins, keying, debris, moisture and latch engagement. Check clamps or fasteners only where accessible under the approved procedure.
Use only the OEM-approved powered check and a suitable breakout. A qualified technician can compare the voltage across the specified supply and return with the model’s limits under the stated test conditions. A multimeter can check supply health. Signal integrity and communications require the appropriate signal test.
| Symptom | What to verify |
|---|---|
| Intermittent feedback after reassembly | Check the positive-fit lug, connector seating and harness strain before opening the encoder. |
| Supply present with a communication alarm | Trace the differential clock and data pairs against D608296. Check the drive feedback selection. |
| Repeatable position with a new zero | Compare the shaft and machine reference with the incoming record and verify the commissioning state. |
Angle of alignment and commissioning
Record direction, motor phase reference and machine datum before removal. For safety functions, apply the motor and control OEM mounting and commissioning checks, including the approved fastening procedure.
Motor and drive applications
Motor with the identified ECN 1123 order
Identify the 743586-01 coupling and axial clamp and confirm the EnDat22 connection before fitting.
Related SpareFaber guides
Drawings, pin maps and manuals
- Mitchell Product Catalog, supported feedback. TI-5000JX supported feedback, HEIDENHAIN ECN1123
- HEIDENHAIN ECN 1123 order 743586-01. Supplementary reference for the stated model or setup.
- Heidenhain Serial Encoders. Reference for the fitted feedback or motor option.
- HEIDENHAIN product information 750816 · ECN 1123 and EQN 1135. Specification, dimensioned 1KA mounting and 15-contact versus 8-contact pin layouts.
- HEIDENHAIN ECN 1123 ID 803429-01. Separate order and temperature rating.
Questions
Can I use a similar label as a replacement?
Compare the interface, mechanical fit, connector, data or commutation requirements and OEM option before choosing a substitute. The ID table gives the useful distinctions for this guide.
What information helps with a diagnosis?
Send the encoder and motor labels, drive model, alarm history and both connector views. Say whether the problem began after cable work, encoder replacement or a drive change. We can confirm visit scope or send-in evaluation and timing from those details.
Site visit or send-in evaluation
Send the encoder and motor labels, drive model, alarm history and both connector views. Say whether the problem began after cable work, encoder replacement or a drive change. We can confirm visit scope or send-in evaluation and timing from those details.