What specialist testing can show
TI-5000JX bench. Confirm singleturn feedback and the actual connector and data configuration.
TI-3000JX motor run. Mitchell lists AKM BiSS support. Verify the fitted motor and run profile.
Starting lead. Use the verified AKM AA connection and fitted encoder fixture.
Kollmorgen AKM AA Hengstler BiSS-B Singleturn Feedback technical reference
Find your part number
Compare the fitted feedback label, complete motor order and connector. A motor order and an encoder MPN identify different items.
| ID or order | How to identify it |
|---|---|
| AKM AA, AKM2–4 | The Rev E selection guide names Hengstler AD34. The later cable guide names AD36 for this frame range. Confirm the fitted label and revision. |
| AKM AA, AKM5–8 | AD58 in the cited Kollmorgen tables. Verify complete feedback and connector order. |
| AKM AB | Multiturn BiSS-B option. Check the turn field and controller support separately. |
| AD34 SSI | Separate interface version with its own pinout and configuration. |
Production and end-of-life status
Confirm orderability and any replacement with the manufacturer against the full fitted ID. The linked documents identify the documented setup.
Specifications
| Parameter | Verified scope |
|---|---|
| Measurement | Singleturn optical BiSS-B on AA in the documented AKM table. |
| Analogue cycles | 2,048 cycles per turn in the cited older Kollmorgen AA table. Confirm the fitted model and its revision. |
| Power | Nominal 5 V DC in the older AA table. The tolerance differs by frame group. Use the exact connector and motor documentation. |
Interface and measuring method
BiSS-B sends an absolute position word in response to the receiver clock. The motor option, BiSS protocol and number of position fields need to match the drive. Check the analogue tracks separately where the fitted assembly provides them.
Mounting and fit
Use the fitted Hengstler label and the complete AKM frame. Compare the rear mounting, shaft engagement and coupling or tether drawing before exchanging the encoder. AD34, AD36 and AD58 references need their own mechanical scope.
Wiring and connector scope
Read the AKM connection code and use its Kollmorgen wiring table. Verify supply, return, clock, data and any analogue pairs using the correct view. Match the profile to BiSS-B.
Internal motor and machine cables
Match the Kollmorgen motor connection code and the actual drive. Identify the internal harness by fitted feedback revision and the machine cable by both end orders. Similar frame labels can have different feedback looms.
Fault checks
Use the site’s isolation procedure before opening a connector or checking resistance. Secure the load against motion, lock out relevant energy sources, wait the specified discharge time and have a qualified technician verify isolation. Follow the OEM procedure for any retention battery.
What can I check on the machine?
Disconnect the harness at both ends. Check end-to-end continuity against the exact drawing, then check for unintended shorts between conductors and to the shell or shield. Compare against the documented shield bonds. Inspect pins, keying, debris, moisture and latch engagement. Check clamps or fasteners only where accessible under the approved procedure.
Use only the OEM-approved powered check and a suitable breakout. A qualified technician can compare the voltage across the specified supply and return with the model’s limits under the stated test conditions. A multimeter can check supply health. Signal integrity and communications require the appropriate signal test.
| Symptom | What to verify |
|---|---|
| Feedback present with wrong position interpretation | Check AA versus AB, BiSS-B selection and the actual fitted encoder. |
| No data after a cable change | Verify clock/data and supply against the exact AKM connection code. |
| Replacement fits poorly | Compare the fitted AD34, AD36 or AD58 assembly to the frame drawing. |
Angle of alignment and commissioning
Preserve the incoming reference and OEM data where present. Check the exact motor’s electrical convention and the fitted encoder’s mounting before a specialist sets or verifies alignment.
Motor and drive applications
Kollmorgen AKM AA
Distinguish AA singleturn from AB multiturn and identify the fitted AD34 or AD58.
Related SpareFaber guides
Drawings, pin maps and manuals
- Kollmorgen AKM support. Mitchell-linked Feedback Description, AA row
- Kollmorgen AKM connectivity manual. Manufacturer reference for the indicated motor or feedback option. Check the fitted revision.
- Mitchell-linked AKM Feedback Description. Reference for the fitted feedback or motor option.
- Kollmorgen AKM selection guide Rev E. Servo motor feedback combinations, BiSS Optical AA/AB frame table.
- Kollmorgen cable guide. Feedback-unit options and connector codes. The smaller-frame AA entry names AD36.
Questions
Can I use a similar label as a replacement?
Compare the interface, mechanical fit, connector, data or commutation requirements and OEM option before choosing a substitute. The ID table gives the useful distinctions for this guide.
What information helps with a diagnosis?
Send the encoder and motor labels, drive model, alarm history and both connector views. Say whether the problem began after cable work, encoder replacement or a drive change. We can confirm visit scope or send-in evaluation and timing from those details.
Site visit or send-in evaluation
Send the encoder and motor labels, drive model, alarm history and both connector views. Say whether the problem began after cable work, encoder replacement or a drive change. We can confirm visit scope or send-in evaluation and timing from those details.