What specialist testing can show
TI-5000JX bench. Read position and preserved motor data on the qualified BMH setup. Confirm the fitted SICK ID.
TI-3000JX motor run. Confirm the full motor order, power lead, phase reference and supported TI-3000JX setup.
Starting lead. Confirm the fitted encoder and OEM feedback connector before selecting the Mitchell lead.
Schneider Electric BMH0702P17F2A Lexium 32 Multiturn HIPERFACE Feedback technical reference
Find your part number
Compare the fitted feedback label, complete motor order and connector. A motor order and an encoder MPN identify different items.
| ID or order | How to identify it |
|---|---|
| BMH0702P17F2A | Exact Lexium 32 motor with multiturn HIPERFACE, keyed shaft and brake. |
| BMH family | Mitchell lists Stegmann feedback support. Read the actual encoder label before assigning a bench profile. |
| Lexium 62 ILM | Separate integrated-drive motor family. Use the BMH motor documentation for this order. |
Production and end-of-life status
Schneider’s exact product record lists BMH0702P17F2A as discontinued on 9 February 2023. Check the fitted order and source for any qualified replacement.
Specifications
| Parameter | Verified scope |
|---|---|
| Feedback | Multiturn SinCos HIPERFACE in the exact Schneider sheet. |
| Motor fit | 70 mm flange and 11 mm diameter, 23 mm shaft length in the data sheet. |
| Brake | The exact order sheet identifies a 3 Nm holding brake. Verify the motor wiring and brake circuit separately. |
Interface and measuring method
HIPERFACE combines analogue movement signals and serial absolute data. Capture the exact ID and original BMH memory where supported, then test the motion signals separately.
Mounting and fit
Compare the fitted motor and encoder drawings and save the incoming mechanical reference. The external shaft and flange dimensions identify the motor and its mounting.
Wiring and connector scope
Use the Schneider BMH manual and the fitted encoder drawing. Verify the feedback connector and separate power and brake circuits before selecting a fixture.
Internal motor and machine cables
Record the internal encoder plug and machine cable separately. Use the Schneider motor and Lexium drive order to identify the production cable.
Fault checks
Use the site’s isolation procedure before opening a connector or checking resistance. Secure the load against motion, lock out relevant energy sources, wait the specified discharge time and have a qualified technician verify isolation. Follow the OEM procedure for any retention battery.
What can I check on the machine?
Disconnect the harness at both ends. Check end-to-end continuity against the exact drawing, then check for unintended shorts between conductors and to the shell or shield. Compare against the documented shield bonds. Inspect pins, keying, debris, moisture and latch engagement. Check clamps or fasteners only where accessible under the approved procedure.
Use only the OEM-approved powered check and a suitable breakout. A qualified technician can compare the voltage across the specified supply and return with the model’s limits under the stated test conditions. A multimeter can check supply health. Signal integrity and communications require the appropriate signal test.
| Symptom | What to verify |
|---|---|
| Position reads but the drive flags motor data | Verify the original memory and exact BMH setup. |
| Motion alarm with working serial ID | Check analogue tracks and the fitted cable. |
| Movement blocked or intermittent | Separate brake and winding checks from the encoder test. |
Angle of alignment and commissioning
Preserve the original motor memory and physical reference before removal. Compare the full motor and encoder IDs and use the BMH commissioning procedure.
Motor and drive applications
Lexium 32 BMH exact motor order
Match the standalone Lexium 32 motor’s feedback and memory to the full BMH order.
Related SpareFaber guides
Drawings, pin maps and manuals
- Mitchell Product Catalog, TI-5000JX supported feedback. Schneider BMH/BSH motor and Stegmann feedback entry, exact OEM BMH0702P17F2A datasheet
- Schneider BMH0702P17F2A exact product data sheet. Supplementary reference for the stated model or setup.
- Schneider BMH servo motor manual 0198441113749. Reference for the fitted feedback or motor option.
- Schneider ILM discussion of the separate BMH memory test. Reference for the fitted feedback or motor option.
- Schneider exact product and lifecycle record. Lifecycle and fitted order data for BMH0702P17F2A.
Questions
Can I use a similar label as a replacement?
Compare the interface, mechanical fit, connector, data or commutation requirements and OEM option before choosing a substitute. The ID table gives the useful distinctions for this guide.
What information helps with a diagnosis?
Send the encoder and motor labels, drive model, alarm history and both connector views. Say whether the problem began after cable work, encoder replacement or a drive change. We can confirm visit scope or send-in evaluation and timing from those details.
Site visit or send-in evaluation
Send the encoder and motor labels, drive model, alarm history and both connector views. Say whether the problem began after cable work, encoder replacement or a drive change. We can confirm visit scope or send-in evaluation and timing from those details.