PVR2005HB302KX1 Hoerbiger PVR 2005 HB 302 K X1 -Electronic digital amplifier PVR2

Electronic digital amplifier PVR2
 The electronic amplifier is designed for controlling of proportional control valves.
A combination of two pulse-width actuating signals with one setting value and one status
signal can be produced via individually developed firmware. It is thus possible to carry out
the controlling and regulation of particular cases. The parameterisation required for this is
deposited in internal fail-safe memory.
 All safety-relevant internal conditions are monitored and made accessible to the user via
suitable error information. Special solutions are available on request, which are
programmed according to the customer‘s wishes.
 Communication with the amplifier takes place over an RS232 interface.
This communication, as well as allowing the attached valve types to be selected, makes
complete parameterisation and diagnosis possible.
 The coupling to the superior controller is made via the existing setting value signals and
status signals.
 The assembly should normally be carried out on a NS35/7,5 mounting rail according to the
standard DIN50022.

Selected technical data:
Protection class: .......................... IP 20 (EN 60529)
Ambient-/operating temperature: ..... 0 °C … +55 °C
Duty cycle: ................................. 100 %
EC-guidelines: ............................. 89/336/EWG
EMV-interference resistance: .......... EN 61000-6-2
EMV-transient emissions: ............... EN 61000-6-4
Solder joints: .............................. lead free
Housing: .................................... DIN rail housing ME MAX (Phoenix contact)